• Journal of Korean Academy of Nursing
• /
• v.7 no.1
• /
• pp.30-38
• /
• 1977

Breast cancer is one of the most feared health problems in women ; Recent studies revealed that it had come up to be the second most in this country and high prevalent disease in the western countries among breast disease in women. However, early detection of the cancer mass is known to be easier than in many other malignancies. This study was performed to investigate the various characteristics of patients of breast cancer ; by the structural variables, menstrual, marital, and child bearing, and also their understandings and attitude towards the disease. A hundred any in- and out- patients of 51. Mary's Hospital and National Atomic Institute, Seoul were sampled. Data were gathered through direct interview by the researcher from February 1976 to January 1977 and the clinical records were used as references. Results are as follows ; 1. Breast cancer revealed to be most prevalent in the forties ; average age of 45.2 years. 2. The average age of menarche revealed to be 15.4 years ; the largest group were the 16-20 years (N=75, 68.2%). In 55 cases (50%) menstruation were normal, 38 (34.5%) postmenopausal and only in 17 (15.5%), menstruation revealed irregularity. 3. The average marital age revealed to be 22.3 years ; the largest group were 21-25 group (N=43, 39.1%). The average duration of marital life revealed to be 24.7 years ; 11-20 years group were the largest (M=34, 30.9%). 4. Most of the patients revealed to have pregnancy experiences(N=100, 90.9%) ; the average rate of experience were 5, 3 times the largest group were 3.4 times group(N= 32, 29.1%). 54 patients (49.1%) revealed to have had abortion experience ; the average were 3.4 times. 5. The largest group(N=77, 70%) had been breast feeding : followed by mixed feeding (N=12, 10.9%) and artificial feeding(N=10, 9.1%). 6. Personal health history revealed that in 20 patients (18.2%) revealed to have the past history of Purulent mastitis, 5 patients(4.5%) of breast cancer and 3 patients(2.7%) of uttering cancer family history. 7. In the one half (N=56, 50.9%, they had some information about breast cancer :27 (24.5%) by mass media, 12 (10.9%) through personal contacts and 17 (15.5%) were not able to classify the source of information. 8. In 55 cases (50%) the canoe, mass were discovered incidentally, in 39 cases (35.5%) by manual detection by self, in 10 cases (9%) by others and in 6 cases(5.5%) by observing subjective symptoms. 9. The average duration lapsed between the discovery of cancer mass and the visit to the hospital revealed to be 9.4 month. Chief reason for the delay revealed to be the non-chaplaincy due to the absence of pain(N=50, 45.5 %) followed by the administration of herb and commercial medication (N=19, 17.3%). 10. The left side breast was more affected than the right side breast, represent by 60 cases in the left and 39 cases in the right. The most frequent site of the breast cancer was the upper- outer quadrant in 53 cases (47.7%), and followed by the center in 20 cases(18 %), and the upper inner quadrant, in 19 cases (17.1%). There was / cases of bilateral carcinoma. The most prominent symptom was painless mass.

• Journal of Adhesion and Interface
• /
• v.18 no.2
• /
• pp.75-81
• /
• 2017

In this study, we synthesized mesoporous carbon (Carbonized Ni-FDU-15) containing nanoporous structures and magnetic nanoparticles. Carbonized Ni-FDU-15 was synthesized via evaporation-induced self-assembly (EISA) and direct carbonization by using a triblock copolymer (F127) as a structure-directing agent, a resol precursor as a carbon-pore wall forming material, and nickel (II) nitrate as a metal ion source. The mesoporous carbon has a well-ordered two-dimensional hexagonal structure. Meanwhile, nickel (Ni) metal and nickel oxide (NiO) were produced in the magnetic nanoparticles in the pore wall. The size of the nanoparticles was about 37 nm. The surface area, pore size and pore volume of Carbonized Ni-FDU-15 were $558m^2g^{-1}$, $22.5{\AA}$ and $0.5cm^3g^{-1}$, respectively. Carbonized Ni-FDU-15 was found to move in the direction of magnetic force when magnetic force was externally applied. The magnetic nanoparticle-bearing mesoporous carbons are expected to have high applicability in a wide variety of applications such as adsorption/separation, magnetic storage media, ferrofluid, magnetic resonance imaging (MRI) and drug targeting, etc.

• Spatial Information Research
• /
• v.23 no.2
• /
• pp.21-29
• /
• 2015

Recently, according to the increasingly populated data, many media and organizations focus on big data, data visualization, information visualization and infographics. Domestically, Chosun.com and Hankyoreh online have improved on the data visualization field and internationally, the Guardian, Wall Street Journal, and New York Times are the leading companies on that area. Until now, many people have recognized infographics as a design-oriented product in Korea. However, one of significant data visualization programs, Tableau Public, can visualize data more efficiently. In this paper, Data Visualization Methods Quadrant for Policy Making is defined, and data analysis and producing infographics are executed. As used data, World Bank open source was adopted and using the number of passenger cars per 1,000 people, two analysis results are extracted. First, in high income group, the more GNI per capita, the lesser Slope is represented and in mid income group, the more GNI per capita positively affects to Slope. Second, in the global finance crisis, the car ownership rate was about 1.7 times than the usual state in the global economy. Through the case study, this paper suggests that the direction of producing infographics should be changed from design-oriented to data-oriented. Moreover, the data-oriented infographics should be propagated as means of scientific research and policy making.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.471-476
• /
• 2020

We propose an practical embodiment-based programming training course for middle school students using Arduino and conduct survey before and after the curriculum. Arduino is an open source physical computing platform that integrates the IDE used in processing language. It is a low-cost, relatively simple I/O interface compared to other platforms, and because of its practical formability, it is educational material suitable for programming. Subsequent surveys will provide feedback on changes in cognition of programming needs and improvement in thinking skills. In this study, the program based on embody-based programming using Arduino was conducted for 8 weeks for each first grade, and 112 middle school students for two years from '16 to '17. Based on the theoretical and practical training, the training was based on the application of the ultrasonic sensor to the RC car and the preparation of the adduction quadrotor drone. The purpose of this study is to prove that the recognition, necessity, and programming education of middle school students are effective for the improvement of thinking ability through the program based on embody-based programming using Arduino.

• KSBB Journal
• /
• v.8 no.3
• /
• pp.193-199
• /
• 1993

To find out the optimum conditions for indigo cell culture in air-lift bioreactor, effects of media composition including nutrients and precursors of the indigo colorants on the cell growth and characteristics of the cell growth under various cultural conditions were analyzed. Optimum cultural conditions were tested and the growth characteristics were analyzed in external and internal loop type air-lift bioreactors during 14-day culture. Better cell growth was obtained when the inoculum size was higher in the range of 0.5∼2.5% packed cell volume tested. In the sucrose concentration of 2 to 4%, the cell growth was better when the sucrose concentration was 4% (w/w) in both types of reactors. Sucrose was used up in the early stage of exponential phase of growth At the optimum concentration of a Precursor tryptophan at 1 U UW was 3.8 g/l in internal loop bioreactor, and 3.5 g/l in external one after 14 days of cultivation. Addition of indole showed negative effect on cell growth of suspension culture in air-lift biorector culture and cell mass of 2.5 g/l and 2.2 g/l were obtained in external and internal loop bioreactor, respectively. Selected inorganic nitrogen source potassium nitrate showed about 110% increase in cell growth than that of control. DCW was 16.34 g/l under optimum conditions during 14-day cultivation in internal loop bioreactor.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.1
• /
• pp.91-99
• /
• 2008

A multilayer tower-type photoreactor, in which $TiO_2$-coated glass-tubes were installed, was used to measure the vapor-phase BTEX removal efficiencies by ozone oxidation ($O_3$/UV), photocatalytic oxidation ($TiO_2$/UV) and the combination of ozone and photocatalytic oxidation ($O_3/TiO_2$/UV) process, respectively. The experiments were conducted under various relative humidities, temperatures, ozone concentrations, gas flow rates and BTEX concentrations. As a result, the BTEX removal efficiency and the oxidation rate by $O_3/TiO_2$/UV system were highest, compared to $O_3$/UV and $TiO_2$/UV system. The $O_3/TiO_2$/UV system accelerated the low oxidation rate of low-concentration organic compounds and removed organic compounds to a large extent in a fixed volume of reactor in a short time. Therefore, $O_3/TiO_2$/UV system as a superimposed oxidation technology was developed to efficiently and economically treat refractory VOCs. Also, this study demonstrated feasibility of a technology to scale up a photoreactor from lab-scale to pilot-scale, which uses (i) a separated light-source chamber and a light distribution system, (ii) catalyst fixing to glass-tube media, and (iii) unit connection in series and/or parallel. The experimental results from $O_3/TiO_2$/UV system showed that (i) the highest BTEX removal efficiencies were obtained under relative humidity ranging from 50 to 55% and temperature ranging from 40 to $50^{\circ}C$, and (ii) the removal efficiencies linearly increased with ozone dosage and decreased with gas flow rate. When applying Langmuir-Hinshelwood model to $TiO_2$/UV and $O_3/TiO_2$/UV system, reaction rate constant for $O_3/TiO_2$/UV system was larger than that for $TiO_2$/UV system, however, it was found that adsorption constant for $O_3/TiO_2$/UV system was smaller than that for $TiO_2$/UV system due to competitive adsorption between organics and ozone.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.615-622
• /
• 2018

Recent advancements in camera communication (CamCom) technology using visible light exploited to use display as an luminance source to modulate the data for visible light data communication. The existing display-CamCom techniques uses the selected region of interest based camera capturing approach to detect and decode the 2D color coded data on display screen. This is not effective way to do communicate when the user on mobility. This paper propose the automatic display detection using Lambertian color segmentation combined with canny edge detection algorithms for CamCom in order to avoid manual region of interest selection to establish communication link between display and camera. The automatic display detection methods fails using conventional edge detection algorithms when content changes dynamically in displays. In order to solve this problem lambertian color segmentation combined with canny edge detection algorithms are proposed to detect display automatically. This research analysed different algorithms on display edge recognition and measured the performance on rendering dynamically changing content with color code on display. The display detection rate is achieved around 96% using this proposed solutions.

• The Korean Journal of Mycology
• /
• v.42 no.4
• /
• pp.312-321
• /
• 2014

Tricholoma bakamatsutake is one of the edible ectomycorrhizal mushrooms as an allied species of Tricholoma matsutake. This is the first report on physical characteristics of T. bakamatsutake strains collected from Quercus mongolica forests in Korea. The pure cultures of these strains were isolated from the tissues of fruit bodies and the culture characteristics were investigated under different conditions (media, temperatures, nitrogen sources). Most strains showed the highest mycelial growth on potato dextrose agar (PDA) at 20 or $25^{\circ}C$. Two strains of T. bakamatsutake preferred the ammonium-form rather than the nitrate-form as an inorganic nitrogen source. T. bakamatsutake showed significantly slower mycelial growth when compared with T. matsutake from a Korean forest, although the optimum culture conditions for the two allied species were similar. We also tested the ability to form mycorrhizae as well as cellulase activity of T. bakamatsutake. All strains showed cellulase activity on a carboxymethylcellulose (CMC) agar plate. The mycorrhizae on axenic Pinus densiflora seedlings were formed by two strains of T. bakamatsutake after 3 or 8 months of inoculation. P. densiflora seedlings inoculated with T. bakamatsutake had a much higher biomass than un-inoculated seedlings.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.6
• /
• pp.327-334
• /
• 2002

Method of besoil analysis were difficult to be applied universally since the use and the source material of bedsoils are diverse from country to country. Korean Standard Methods for Bedsoil Analysis was developed to measure the particle and bulk density. Fifty-three samples for horticultural bedsoil and nine samples for paddy rice bedsoil in the current market were collected. Particle density was measured by electrical pyconometer with He gas, and bulk density by the sandbox method, free fall method, plunger compaction method, free fall and plunger method, and sample weight compaction method. While the use of glass pycnometer which measures particle density to fill blank space with water was inappropriate due to floating organic and calcined inorganic materials in the water, the electrical pycnometer with gas type was suitable considering speed and accuracy. For bulk density, the sandbox method recommended as European Standard Method was more reasonable in principle than other methods. However, this method requires expensive apparatus and intricate process. Plunger compaction method was proposed as standard method, since it had higher consistence with the sandbox method than other methods, as well as an advantage of easy and prompt measurement. Particle density of bedsoil ranged $1.48{\sim}2.67Mg\;m^{-3}$(mean $1.93Mg\;m^{-3}$) for horticultural bedsoil and $2.33{\sim}2.67Mg\;m^{-3}$ (mean $2.43Mg\;m^{-3}$) for paddy rice bedsoil by the electrical pycnometer with He gas. Bulk density of bedsoil ranged $0.11{\sim}0.40Mg\;m^{-3}$ (mean $0.22Mg\;m^{-3}$) for horticultural bedsoil and $0.84{\sim}1.26Mg\;m^{-3}$(mean $1.01Mg\;m^{-3}$) for paddy rice bedsoil by plunger compaction method.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.631-636
• /
• 2002

Lethality of high intensity light pulse on the pre-determined microbial populations has been investigated. Prior to the treatment, Lactobacillus plantarum, Lactobacillus brevis, Leuconostoc mesenteroides and Pediococcus pentosaceus were cultivated separately onto the surface of Lactobacilli MRS agar. Pre-determined microbial populations were applied to the test media and these sample were exposed to high intense light source with an exposure time ranging from 1 to $2500\;{\mu}s$. Results showed that at least 200 light pulses of $1\;{\mu}s$ duration were required to reduce L. Plantarum cells by 90% at 25 kV, the greater the number of light pulses, the larger the reduction in viable cell numbers. Viable cells of L. plantarum and the others were reduced by more than 5 and 6 log cycles at the upper exposure level of $750\;{\mu}s$, respectively. These study shows that pulsed light emissions can significantly reduce populations of lactic acid bacteria on exposed surface with exposure times. Killing efficiency for L. plantarum significantly increased with decreasing the distance between the lamp and the surface of samples.