• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.728-731
• /
• 2010

본 연구는 LED를 활용한 기능성 숟가락에 관한 것으로, 누구나 쉽게 접하는 기호식품인 차를 뜨겁게 마실 때와 차갑게 마실 때 부주의에 의한 신체 손상을 유발하는 것을 사전에 예방하기 위한 것이다. 특히 유아에게 이유식을 수유하는 경우 어머니들은 차고 뜨거움을 손수 확인하고 있는 실정으로 안전성에 노출되어 있다. 따라서 본 연구에서는 이러한 문제를 해결하기 위하여 온도제어 기술을 이용하여 LED 색의 차이로 기준온도 이하이면 파란 색을, 기준온도 이상이면 빨간 색을 발광하는 원리를 통해 LED 색상 변화로 차고 뜨거움을 사용자에게 쉽게 인지시켜 안전성을 확보하기 위함이다.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.613-615
• /
• 2000

We explained the present and future tendency in the electric machinery research and development status. Being started WTO system and in the Infinite competitiveness, we hope that this paper will be helpful to strengthen competitiveness of our electric machinery industry.

• Journal of the Optical Society of Korea
• /
• v.9 no.1
• /
• pp.32-35
• /
• 2005

In light microscopy, spatial resolution is limited by diffraction effect. Confocal microscopy has improved resolutions in both lateral and axial directions, but these are still limited by diffraction effect. Confocal self-interference microscopy (CSIM) uses interference between two perpendicularly polarized beams to enhance lateral resolution. In previous research, we proposed a calcite plate with its optic-axis perpendicular to the propagation angle and one of the boundary surfaces of the plate. This type of plate is not widely used to our knowledge. In this paper, we change the calcite plate to more common one, which is commercially available. This calcite plate has its optic axis in the plane of incidence. We analyze the characteristics of this calcite plate and numerically compare the performances of CSIM in previous research and CSIM with the commercial calcite plate. Numerical results show improved performance when using the commercial calcite plate

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.316-320
• /
• 2009

A novel broadband wavelength-swept Raman laser was used to implement Fourier-domain mode locked (FDML) swept-source optical coherence tomography (SS-OCT). Instead of a conventional semiconductor optical amplifier, this study used broadband optical fiber Raman amplification, over 50 nm centered around 1545 nm, using a multi-wavelength optical pumping scheme, which was implemented with the four laser diodes at the center wavelengths of 1425, 1435, 1455 and 1465 nm, respectively, and the maximum operating power of 150 mW each. The operating swept frequency of the laser was determined to 16.7 kHz from the FDML condition of 12 km optical fiber in the ring cavity. The OCT images were obtained using the novel broadband wavelengthswept Raman laser source.

• Current Optics and Photonics
• /
• v.2 no.4
• /
• pp.361-367
• /
• 2018

Ultrafast deep-ultraviolet (DUV) pulse generation from the subwavelength aperture of a plasmonic waveguide was investigated. The plasmonic nanofocusing of near-infrared (NIR) pulses was exploited to enhance DUV photoemission of surface third harmonic generation (STHG) at the amorphous $SiO_2$ dielectric. The generated DUV pulses which are successfully made from a nano-aperture using 10 fs NIR pulses have a spectral bandwidth of 13 nm at a carrier wavelength of 266 nm. This method is applicable for tip-based ultrafast UV laser spectroscopy of nanostructures or biomolecules

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.2
• /
• pp.16-19
• /
• 2016

More efficient use of the battery pack is dependent upon how to measure the remaining capacity of the battery accurately. Among various measurement methods, the basic correction measurement method has still been a hot research topic area to reduce the errors. In this paper, the problems of the existing methods have been investigated and the research direction for measuring more accurate remaining capacity has been suggested by applying the numerical simulations in the future.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.711-713
• /
• 2000

Recently, the insulation breakdown accident happened at 6.6kV inverter driving motor brings out the reliability decrease to the motor driving system. We need to find the solution with system engineering level. The objectives of this study are developing the appropriate filter for the drive to protect the motor and the insulation system of motor which is driven by inverter. The circuit parameters of cable are calculated by EMTP(Electromagnetic Transient Program) to simulate the system. And we use MATLAB to find the appropriate filter parameter. The simulation and the test results are compared to verify the suitability of the filter parameter. We clarify the cause of the deterioration of the inverter driving motor through the analysis of insulation breakdown accidents. The endurance test scheme and the configuration method of insulation system are established.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2564-2566
• /
• 2000

HILS(Hardware In-the-Loop Simulation) is an effective tool for design, performance evaluation and test of developed vehicle subsystems such as ABS(Antilock Brake System), suspension, and steering systems. This paper describes a HILS model for an ABS/ASR application. Also the implementation of HILS system for performance test of the ABS ECU(Electronic Control Unit) for commercial vehicles is presented.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.690-692
• /
• 2000

In this paper voltage distribution in the windings of an inverter fed induction motor is studied. High frequency parameters of the induction motor are calculated using finite element analysis. With these parameters. a high frequency equivalent circuit of the inverter-cable-motor is formed. The transient analysis is performed using ATP-EMTP package to estimate the voltage distribution in the motor windings.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1906-1908
• /
• 2000

The central monitoring system with on-line diagnosis of high-voltage generator/motor stator insulation is developed. The system is capable of remote diagnosis and monitoring partial discharges of high-voltage generator/motor stator insulation. GOMS(Generator On-line Monitoring System) with maximum of 9 input channels can measure and analyze the status of high-voltage motor stator insulation by on-line. The measured and analysis data are brought to the central monitoring system via modem to build database. The central monitoring system can diagnose and monitor the insulation status of several high-voltage generator/motor at any time. The insulation status of those machines can be enhanced by the database on partial discharges.