• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.88-94
• /
• 2000

A winding bend rig for measurement of springback ratio is made. It measures the bending angles before and after release of bending load which bends specimens with keeping a constant curvature. Thus the springback ratio can be obtained by using this bend rig. Analytical explanations for the spring back are tried by employing simple beam theory. For the analytical calculations with the theory, Young's modulus, fracture strain and stress-strain curve are necessary and these data are obtained from a tensile test. Using both of the beam theory and the results of tensile test, the springback ratio is also calculated. Comparisons of the two springback ratios, one is obtained from bending test and the other from tensile test, show a good agreement.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.621-627
• /
• 2010

This paper presents a TSMST (Theory - Simulation - Measurement - Simulation - Theory) method for power electronics laboratory. The method successfully integrates theory, simulation and measurement, thus enabling better integration of student's knowledge and better usage of inadequate number of laboratory hours. Students are attracted with relatively simple tasks to be solved and modern, but economical laboratory equipment. A significant part of the assignments can be made at home, thus lowering the pressure on students to finish the tasks on time. The proposed method is described on three basic examples explaining characteristic phases of the TSMST method.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.96-102
• /
• 1998

In this study, the theory and application of phase-shifting shadow moire topography is focused on the non-contact measurement of object surfaces for practical use in the field of production engineering. Shadow moire topography has been studied during last few decades in the area of the optical physics, and now its mathmatical theory has been established. Generally, in case of the classical shadow moire topography, the sensitivity is a few tenths of millimeter in best cases. Here we tried the application of phase-shifting method to the conventional shadow moire topography. But the reference grating and the deformed grating are mutually dependent because it is impossible to obtain uniform phase shifts on the whole Held. Therefore it is difficult to use a phase-shifting method in shadow moire topography. However, it was shown that constant phase-shifting was able to be measured by moving both the grating and light source. Finally we obtained a better result by using this procedure and applied the phase-shifting shadow moire to three dimensional object measurement.

• Industrial Engineering and Management Systems
• /
• 제11권1호
• /
• pp.54-69
• /
• 2012

Chan and Qi (SCM 8/3 (2003) 209) developed an innovative measurement method that aggregates performance measures in a supply chain into an overall performance index. The method is useful and makes a significant contribution to supply chain management. Nevertheless, it can be cumbersome in computation due to its highly complex algorithmic fuzzy model. In aggregating the performance information, weights used by Chan and Qi-which aim to address the imprecision of human judgments-are incompatible with weights in additive models. Furthermore, the default assumption of linearity of its scoring procedure could lead to an inaccurate assessment of the overall performance. This paper addresses these limitations by developing an alternative measurement that takes care of the above. This research integrates three different approaches to multiple criteria decision analysis (MCDA)-the multiattribute value theory (MAVT), the swing weighting method and the eigenvector procedure-to develop a comprehensive assessment of supply chain performance. One case study is presented to demonstrate the measurement of the proposed method. The performance model used in the case study relies on the Supply Chain Operations Reference (SCOR) model level 1. With this measurement method, supply chain managers can easily benchmark the performance of the whole system, and then analyze the effectiveness and efficiency of the supply chain.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.746-752
• /
• 2014

In a multi-camera measurement system, the determination of the external parameters is one of the vital tasks, referred to as the calibration of the system. In this paper, a new geometrical calibration method, which is based on the theory of the vanishing line, is proposed. Using a planar target with three equally spaced parallel lines, the normal vector of the target plane can be confirmed easily in every camera coordinate system of the measurement system. By moving the target into more than two different positions, the rotation matrix can be determined from related theory, i.e., the expression of the same vector in different coordinate systems. Moreover, the translation matrix can be derived from the known distance between the adjacent parallel lines. In this paper, the main factors effecting the calibration are analyzed. Simulations show that the proposed method achieves robustness and accuracy. Experimental results show that the calibration can reach 1.25 mm with the range about 0.5m. Furthermore, this calibration method also can be used for auto-calibration of the multi-camera mefasurement system as the feature of parallels exists widely.

• Advances in nano research
• /
• 제12권3호
• /
• pp.263-279
• /
• 2022

In this research, the physical education training quality was investigated using the entropy model to compute variance associated with a random value (a strong tool). The entropy and undefined estimation principles are used to extract the greatest entropy of information dependent on the index system. In the study of tennis motion tracking from a dynamic viewpoint, such stages are utilized to improve the perception of the players' achievement (Lv et al. 2020). Six female tennis players served on the right side (50 cm from the T point). The initial flat serve from T point was the movement under consideration, and the entropy was utilized to weigh all indications. As a result, a multi-index measurement vector is stabilized, followed by the confidence level to determine the structural plane establishment range. As a result, the use of the unascertained measuring technique of information entropy showed an excellent approach to assessing athlete performance more accurately than traditional ways, enabling coaches and athletes to enhance their movements successfully.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.510-512
• /
• 1997

Measurement errors in a temperature measurement system are mainly due to the consisting elements' accuracies and the circuit parameters' changes following the environment variations such as temperature. Further, system's non-linearity makes the measurement accuracy worse, and accordingly a linearization method should be considered to avoid this worsening. In this study, an error-correction method and a linearization method are proposed and a system utilizing these methods is realized.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.108-120
• /
• 1996

A new technique and theory are proposed which correct orientation of a cylinder to perform a reliable measurement of the surface profile. We analyze characteristics of machined surfaces, e.g., ground, lapped and turned surfaces. Based upon the results. the optimum correction technique is derived by the statistical method. To verify the techinques, measurements are carried out by using the contact stylus profilometer on a controllable table. The measurement shows that surface information of cylinders can be acquired with high accuracy.

• 한국정밀공학회지
• /
• 제6권2호
• /
• pp.47-57
• /
• 1989

This paper aims at describing a series development of the electrical machine, by using the Similarity Theory. The character of the electrical machine defined as the Four Terminal Network of the electrical and mechanical energy transmission system, and the analogy theory of the modelmachine can be developed by the Four Termianl System. Also the Restriction Parameter and Disturbance Parameter can be founded by the comparative data of the developed machine that is the character of the theory and measurement.

• 동아시아경상학회지
• /
• 제4권2호
• /
• pp.1-11
• /
• 2016

This study investigated commercial power theory of traditional market through the analysis of literature review. Consumers' store selection models are made up a theory based on normative hypothesis, theory of mutual reaction, utility function estimation model, and cognitive-behavioral model. Detailed models are as follows. Normative hypothesis based theory is divided into Reilly's retail gratification theory and Converse's revised retail g ratification theory. Interaction theory is composed of Huff's probability gratification theory, MCI model and Multi-nominal Logit Model (MNL model). There are four models in retail organization position theory such as central place theories, single store position theory, multi store position - assign model, and retail growth potential model. In case of single store position theory, theoretical and empirical techniques have developed for a decision to optimum single store position. Those are like these, a check list, the most simple and systematic method, analogy, and microanalysis technique. Aforementioned models are theoretical and mathematical commercial power measurement and/or model. The study has rather limitations because the variation factors included in formula are only a part of actual commercial power. Therefore, further study shall be made continuously to commercial power areas and variables.