• Radiation Oncology Journal
• /
• 제9권1호
• /
• pp.143-152
• /
• 1991

본 논문에서는 소조사면에 대한 X-선의 선량분포를 일반실험식으로 계산될 수 있도록 beam 측정 데이타를 종합 처리하는 방법에 대하여 기술하고 있다. Beam 데이타는 philips LINAC 6 MV, 8 MV X-ray에 대하여 측정 되었으며, 측정된 요소는 tissue maximum ratio (TMR), off-axis-ratio (OAH), 그리고 relative output factor (ROF)를 포함한다. 소조사면에 의한 방사선 치료를 위하여 isocenter에서 지름이 1 내지 3cm되도록 실린더 형태의 특수 collimator가 2 mm 간격으로 제작되었다. 본 측정을 위하여 다이오드 detector가 이용되었으며 Film 및 TLO 측정기로 측정된 값과 비교검토 되었다. 제한된 조사면으로 측정된 TMR, OAR data로부터 beam 데이타를 나타내는 실험식을 유도하였으며 이 실험식은 임의의 Set-UP조건에 따른 측정값을 예상할 수 있는 일반 실험식으로 확장되었고 측정된 TMR과 OAR 값들은 잘 일치되었다.

• 인지과학
• /
• 제19권4호
• /
• pp.443-458
• /
• 2008

오늘날 웹페이지(Web page)는 많은 정보를 포함하고 있다. 본 논문에서는 정보추출(information extraction) 등에서 유용하게 사용되는 개체명(named entity)을 웹(Web)을 이용하여 영역별로 자동으로 추출하는 집합 확장 시스템을 제안한다. 그 방식은 전체적으로 3단계의 구성을 가진다. 우선 사전을 구축하고자 하는 영역의 몇 개의 원소를 씨앗단어로 이용하여 웹페이지를 검색한다. 다음으로 검색되어진 웹페이지와 씨앗단어 정보를 이용하여 패턴 규칙을 추출한다. 추출된 패턴 규칙을 다시 웹페이지에 적용하여 개체명 후보들을 추출하고 최종적으로 추출된 후보들과 웹페이지 사이의 상호 중요도를 재귀적으로 계산하여 개체명 후보들에 대한 순위를 정하게 된다. 이 방식의 실험은 한국어와 영어로 나누어서 실험을 수행하였고, 한국어는 3개의 영역에서, 영어는 8개의 영역에서 실험을 진행하였다. 그 결과, 한국어에서는 78.72%의 MAP를 얻을 수 있었고, 영어에서는 96.48%의 MAP를 얻었다. 특히, 영어 개체명 인식에서의 성능은 구글에서 제공하고 있는 구글셋의 결과보다도 높은 성능을 보였다.

• 한국항공우주학회지
• /
• 제48권11호
• /
• pp.927-933
• /
• 2020

본 논문에서는 항공기 자세 변화를 고려한 항공기 보조연료탱크 연료량측정시스템을 제시하였다. 개발된 연료량측정시스템은 연료센서, 데이터 처리장치, 계기 및 센서 데이터로부터 연료량을 추정하는 소프트웨어로 구성되었다. 지상에서의 롤 및 피치 자세 변화를 모사하기 위해 모사시험 장치가 개발되었다. 모사시험장치를 이용하여 다양한 연료량, 롤 및 피치 각도의 센서 데이터를 자동으로 측정하여 트레이닝 데이터 세트를 획득하였다. 연료량을 추정하는 연료량 측정 소프트웨어를 트레이닝 데이터 세트와 함께 삼선형보간법을 사용하여 개발하였다. 개발된 연료량측정시스템은 참값을 알고 있는 테스트 데이터 세트의 연료 추정 오차를 측정하여 검증하였다. 테스트를 통해 개발된 연료량측정시스템의 오차가 TSO-C55 문서의 기준을 충족하는 것을 확인하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권3호
• /
• pp.173-181
• /
• 2003

Purpose : This study was intended to evaluate the positional relationship between the hyoid bone and the mandible in patients with mandibular protrusion after mandibular set-back surgery by means of 3D-CT. Materials and methods : Preoperative(3 weeks before) and postoperative (6 weeks after) 3D-CT & cephalogram were taken on 32 patients(12 male, 20 female, mean age of 23.2) treated by bilateral sagittal split osteotomy with rigid fixation. The angular measurement on 3D-CT basilar view were deviation of Me & H, long axis angle of left & right cornu majus. The lineal measurement on 3D-CT basilar view were composed of intercondylar line and coordinates(x,y) of Me & H. The angular & lineal measurement of lateral cephalogram were composed of mandibular plane angle, SNA, SNB, ANB, FH-NA & FH-NB, and coordinates(x,y) of B, Pog, Me & H, PAS, Lpw, MPH and IAS. On the frontal cephalogram, deviation of Me were evaluated. Results : The mean mandibular set-back was 8.0mm horizontally and mandibular plane angle was slightly increased. The hyoid bone was displaced postero-inferiorly, the distance between MP(mandibular plane) and H(hyoid bone) was increased and the posterior airway space values (PAS, Lpw, IAS) were decreased. The coordinates Me(x,y), H(x,y) and deviation angle Me'& H' were revealed the strong positive correlation. Conclusion : The results revealed that the horizontal, vertical and transverse relationship of the mandibular and the hyoid bone movements were significantly correlated in patients performed mandibular set-back surgery.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.916-919
• /
• 2003

In this paper, we deal with a development of measurement system to apply the leakage rates test of primary containment in nuclear power plant. The measurement test about leakage rates in primary containment is one sort of test to prove safety of nuclear power plant. The parameters which are measured to calculate leakage rates are drybulb temperature, dew point temperature(or relative humidity), absolute pressure and flow. Overall, the measurement system consists of sensor module for data acquisition of the parameters, transfer module for wireless data communication and control module to control system and to calculate leakage rates. Because existing measurement systems are difficult to set in field, we pursued convenience of use, we applied wireless data communication and individual form module using battery. We also changed for the better in confidence. Recently, we are developing a drybulb temperature and a dew point temperature sensor module. We describe about function of developed measurement system, its standard and an plan for verification of measurement system.

• Architectural research
• /
• 제13권1호
• /
• pp.25-32
• /
• 2011

The purpose of this research is to investigate the effect of specific hydration reaction on the stiffening process of cement paste. The cement compositions are manipulated to cause specific hydration reactions (secondary gypsum and syngenite formation) responsible for false set, and the relationship between specific hydration reactions and the flow and stiffening behavior of cement paste were investigated using modified ASTM C 403 penetration resistance measurement and oscillatory shear rheology. X-ray powder diffraction (XRD) was used for the phase identification associated with premature stiffening of cement paste. Differential thermal analysis (DTA) and thermogravimetric analysis (TGA) were used for verification of syngenite formation. From the results, both secondary gypsum and syngenite formation caused faster stiffening and set. The amount of syngenite produced during 1 hour hydration was approximately 1 % of total mass of the cement paste, but cement paste with syngenite formation showed significantly accelerated stiffening behavior compared to normal cement paste.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.321-331
• /
• 1997

Measurement of attributes is often highly subjective and imprecise, yet most MADM methods lack provisions for handling imprecise data. Frequently, decision makers must establish a ranking within a finite set of alternatives with respect to multiple attributes which have varying degrees of importance. The problem is more complex if the evaluations of alternatives according to each attribute are not expressed in precise numbers, but rather in fuzzy numbers. Analysis must allow for lack of precision and partial truth. The advantages of a fuzzy approach for MADM are that a decision maker can obtain efficient solutions all at once without trial and error, and that this approach provides better support for judging the interactive improvement of solutions in comparison with o decision making method. The algorithm used in this study is based on the concepts of vague set theory. Linguistic variables and vague values are used to facilitate a decision maker's subjective assessment about attribute weightings and the appropriateness of alternative versus selection attributes in order to obtain final scores which are called vague appropriateness indices. A numerical example is presented to show the practical applicability of this approach.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.195-199
• /
• 2003

The stoichiometric methan/air premixed turbulent flames at the axisymmetric Bunsen burner situation are numerically investigated. To account for the chemistry-turbulence interaction in the turbulent premixed flames, the steady laminar flamelet library method has been adopted. The flame front is tracked by using the Level-Set Approach. Turbulence is represented by the ${\kappa}-{\varepsilon}$ modeling with a Pope's correction. The detailed comparison between prediction and measurement has made for the flame field in terms of velocity, turbulent kinetic energy, and normarlized temperature.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1012-1017
• /
• 1993

In this paper, the instruction set and the architecture of a RISC processor for programmable logic controller is suggested. From the measurement of existing programs, the characteristics of ladder instructions are analyzed. The instruction set is defined so that the existing ladder program can be reused with simple translation. Because bit instructions controls the behavior of word instructions, the processor suits for high level language like SFC. Simulations show that the PLC with the suggested processor is twenty times faster than the PLC with the multi-purpose microprocessor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.598-601
• /
• 2005

Z-correction is new method to be used when measuring pattern registration of photomasks. The method is based on measurement of the plate profile in the Zaxis and takes into account the impact on the registration deviations caused by plate support, contamination as well as the photomask flatness itself. Z-correction further facilitates a more neutral way of judging the overlay properties between individual photomasks within a mask set.