• Journal of the Korean Data and Information Science Society
• /
• v.24 no.2
• /
• pp.257-265
• /
• 2013

As evaluating the health literacy is getting important, various measures for evaluation are being developed. Nevertheless, discussions about developing proper measures in Korean are still inactive. Therefore in this paper, we proposed Korean REALM (rapid estimate of adult literacy in medicine) measure that is composed of five point scale and investigated about its validity. As a result, we could find that Korean REALM measure which is composed of five point scale has high reliability, and that it formed one dimension as a result of factor analysis. Positive responses were lower than two point scale and correlation coefficient with NVS (the newest vital sign) appeared statistically significant. Therefore, we could conclude that Korean REALM measure that is composed of five point scale is a valid measurement. Furthermore, there were statistically significant differences between general students and department of nursing students about health literacy.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.187-190
• /
• 2006

In the present study, effects of tree-stream turbulence and surface trip wire on the flow past a sphere at $Re\;=\;0.4\;{\times}\;10^5\;{\sim}\;2.8\;{\times}\;10^5$ are investigated through wind tunnel experiments. Various types of grids are installed upstream of the sphere in order to change the tree-stream turbulence intensity. In the case of surface trip wire, 0.5mm and 2mm trip wires are attached from $20^{\circ}\;{\sim}\;90^{\circ}$ at $10^{\circ}$ interval along the streamwise direction. To investigate the flow around a sphere, drag measurement using a load cell, surface-pressure measurement, surface visualization using oil-flow pattern and near-wall velocity measurement using an I-type hot-wire probe are conducted. In the variation of free-stream turbulence, the critical Reynolds number decreases and drag crisis occurs earlier with increasing turbulence intensity. With increasing Reynolds number, the laminar separation point moves downstream, but the reattachment point after laminar separation and the main separation point are fixed, resulting in constant drag coefficient at each free-stream turbulence intensity. At the supercritical regime, as Reynolds number is further increased, the separation bubble is regressed but the reattachment and the main separation points are fixed. In the case of surface trip wire directly disturbing the boundary layer flow, the critical Reynolds number decreases further with trip wire located more downstream. However, the drag coefficient after drag crisis remains constant irrespective of the trip location.

• Journal of Energy Engineering
• /
• v.28 no.4
• /
• pp.42-47
• /
• 2019

In this study, combustion characteristics were measured by selecting di-n-buthylamine, which is widely used as an emulsifier, insecticide, additive, rubber vulcanization accelerator, corrosion inhibitor, and raw material for dye production. The flash point of the di-n-buthylamine was measured by Setaflash, Pensky-Martens, Tag, and Cleveland testers. And the AIT of the di-n-buthylamine was measured by ASTM 659E. The explosion limits of the di-n-buthylamine was calculated using the measured flash points by Setaflash tester. The flash point of the di-n-buthylamine by using Setaflash and Pensky-Martens closed-cup testers were experimented at 38 ℃ and 43 ℃, respectively. The flash points of the di-n-buthylamine by Tag and Cleveland open cup testers were experimented at 48 ℃. The AIT of the di-n-buthylamine was experimented at 247 ℃. The LEL and UEL calculated by using lower and upper flash points of Setaflash tester were calculated at 0.69 vol% and 7.7 vol%, respectively. The measurement of the flash point measurement and the calculation method of the explosion limit prediction presented in this study can be used to study the fire and explosion characteristics of the other combustible liquids.

• Journal of the Korean Society of Costume
• /
• v.51 no.7
• /
• pp.147-165
• /
• 2001

The objective of this study was to develop the Jeogori Pattern for 9 to 10 year-old boys To determine the measurement items for the Jeogori Pattern making, applied factor analysis, correlation analysis and regression analysis to the 37 measurement items of the 9 to 10 year-old boys classified as a standard somatotype. To understand the shape and variation of the body surface, analyzed the replica of the upper body surface that was obtained by the method of using surgical tape. Be based on the results of the above studies, designed the Jeogori Pattern. The designed pattern was evaluated by the sensory test. The drafting methods of Jeogori Pattern obtained are as follows. $\circled1$ The measurement items are Bust Girth, Center Back Waist Length, Neck Width, and Hwajang Length. $\circled2$ Jeogori Length Center Back Waist Length$\times$4/3 $\circled3$ Front Body Girth(1/2) : B/2 + 1.5cm Back Body Girth(1/2) : B/2 + 3.5cm $\circled4$ Jin-Dong : B/4 + 3cm $\circled5$ Back Godae Width(1/2) : Neck Width/2 + 1.7cm Front Godae Width(l/2) : Back Godae Width(1/2) - 2cm $\circled6$Back Godae Point is 1.5cm higher than shoulder line, and Front Godae Point is 1.5cm lower than shoulder line. $\circled7$ Back Godae Depth: 1.2cm + 1.5cm = 2.7cm The Jeogori Pattern designed by the above method Is as (fig. 8) The results of the sensory test of the new pattern are as fellows. Except for 2 items, every mark of 24 test items has over 5.0 point and a total average mark is 5.25 point. Witch is a good mark. Therefore the new pattern is valid. Especially, the parts of Git, sleeves and back face have a high mark, so the appearances of those parts are excellent.

• Journal of Sensor Science and Technology
• /
• v.22 no.6
• /
• pp.410-414
• /
• 2013

As one of the effective methods for researching the objective tinnitus detection, the GPIAS (Gap Pre-pulse Inhibition of Acoustic Startle) measurement has been used to verify the existence of animal tinnitus objectively. The level and pattern of the background sound presented prior to a startle pulse are closely related with the GPIAS results. But the effect of the starting point of the background sound on animal startle responses has not been reported yet. In this paper, we present the implementation of a GPIAS measurement system based on an unconstrained enclosure to avoid animals' excessive constraint stress and deal with the animals' growth. After the performance of our implemented system has been tested through the animal experiment using 4 SD-rats, the effect of starting point of stimulus background sound on the startle response has been studied by the use of our implemented system. Through the results, it is verified that our system can measure the inhibition of animal startle responses due the gap pre-pulse for GPIAS calculation and the background sound starting point does not significantly effect on the startle response and the GPIAS values if the background sound continues for more than 300msec before a gap pre-pulse is presented.

• Journal of the Korean Institute of Gas
• /
• v.6 no.1 s.17
• /
• pp.17-23
• /
• 2002

This paper introduces the spring-mounted odometer system which maintains the correct contact with the pipe wall and measures the distance along the pipe. The odometer wheel is designed to keep contact to the pipelines inner wall and to generate fifty rectangular pulses per one turn(159.5681mm) during pigging. The pipeline has the defects in various types such as buckles, winkles, cracks, dents, welding point and so on. Specially girth welding points which exist each 12m of the pipeline, much affects the operational environment of the odometer. The measurement error of the distance along the pipe is accumulated, for the measurement error of wheel's circumference and the pipeline inner environment. So, this paper proposes the method for the error compensation based on the analysis of the odometer's behavior around the girth welding point of pipe. The experimental results show that developed odometer system can be used for the intelligent pig with good performances.

• The Journal of Korean Society for Radiation Therapy
• /
• v.5 no.1
• /
• pp.131-135
• /
• 1992

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.195-198
• /
• 2002

Demand for high precision measurement of large area is increasing in many industrial fields. White-light Scanning Interferometer(WSI) is a well-known method for 3D profile measurement. However WSI has some limitations in a measurement range because of the sensing mechanism. Therefore, in this paper we use a heterodyne laser interferometer to get over the limitations of a short measurement range in WSI, We suggest a new WSI system combined with heterodyne laser interferometer. This system is aimed at eliminating Abbe error with measuring the focus point directly. With the use of triggering functionality of WSI, we can use this system as a probe of a precision stage such as a probe of CMM. The suggested system gives a repeatability of 87 nm in the absolute distance measurement test under the laboratory environment.

• ETRI Journal
• /
• v.31 no.1
• /
• pp.68-70
• /
• 2009

In this letter, a parametric analysis of the Fresnel-field antenna measurement method is performed for a square aperture. As a result, the optimum number of Fresnel fields for one far-field point is guided as $M_{opt}=N_{opt}=D^2/{\lambda}R+5$, where D is the antenna diameter, ${\lambda}$ is the wavelength, and R is the distance between the source antenna and the antenna under test. For the aperture size 5 ${\leq}$ $L_x/{\lambda}$ ${\leq}$ 20, the tolerable distances for gain errors of 0.5 dB and 0.2 dB can be guided as $R_{0.5\;dB}$ ${\approx}$ $1.2Lx/{\lambda}$ and $R_{0.2\;dB}$ ${\approx}$ $2.0L_x/{\lambda}$, where $L_x$ is the lateral length of the square aperture. The tolerable distances for 20 ${\leq}$ $L_x/{\lambda}$ ${\leq}$ 200 are also proposed. This measurement guideline can be fully utilized when performing the Fresnel-field antenna measurement method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.838-841
• /
• 2000

To improve the accuracy of products and improve the product quality, we need to enhance the machining accuracy of the machine tools. To this point of view, measurement and inspection of finished part as well as error analysis of machine tools has been studied for last several decades. OMM(On the Machine Measurement) has been issued to alternate with CMM, pointing out disadvantages of high expenses and lots of setting time in CMM. In this paper, we study 1) the spherical surface manufacturing by volumetric error compensation of machine tool, 2) the system development of OMM without detaching work piece from a bed of machine tool after working. 3) the generation of the finished part profile by On the machine measurement. Furthermore, the output of OMM is compared with that of CMM, and verified the feasibility of the measurement system.