• Smart Structures and Systems
• /
• 제6권9호
• /
• pp.1025-1039
• /
• 2010

Measuring displacement response for civil structures is very important for assessing their performance, safety and integrity. Recently, video-based techniques that utilize low-cost high-resolution digital cameras have been developed for such an application. These techniques however have relatively low sampling frequency and the results are usually contaminated with noises. In this study, an integrated visual-inertial measurement method that combines a monocular videogrammetric displacement measurement technique and a collocated accelerometer is proposed for displacement and velocity measurement of civil engineering structures. The monocular videogrammetric technique extracts three-dimensional translation and rotation of a planar target from an image sequence recorded by one camera. The obtained displacement is then fused with acceleration measured from a collocated accelerometer using a multi-rate Kalman filter with smoothing technique. This data fusion not only can improve the accuracy and the frequency bandwidth of displacement measurement but also provide estimate for velocity. The proposed measurement technique is illustrated by a shake table test and a pedestrian bridge test. Results show that the fusion of displacement and acceleration can mitigate their respective limitations and produce more accurate displacement and velocity responses with a broader frequency bandwidth.

• 설비공학논문집
• /
• 제15권8호
• /
• pp.652-660
• /
• 2003

T-history method, measuring heat-of-fusion of phase change material (PCM) in sealed tubes, has the advantages of a simple experimental device and no requirements in sampling process. However, a degree of supercooling used in selecting the range of latent heat release and neglecting sensible heat during the phase change process can cause significant errors in determining the heat of fusion in the original method, which has been improved in order to predict better results by us. In the present study, the modified method was applied to a variety of PCM such as paraffin and lauric acid having very small or no supercooling with a satisfactory precision. Also the selection of inflection point and temperature measurement position was fumed out not to affect the accuracy of heat-of-fusion significantly. As a result, the method can provide an appropriate means to assess a new developed PCM by cycle test even if a very accurate value cannot be obtained.

• 제어로봇시스템학회논문지
• /
• 제11권4호
• /
• pp.304-313
• /
• 2005

The robots that will be needed in the near future are human-friendly robots that are able to coexist with humans and support humans effectively. To realize this, robot need to recognize his position and direction for intelligent performance in an unknown environment. And the mobile robots may navigate by means of a number of monitoring systems such as the sonar-sensing system or the visual-sensing system. Notice that in the conventional fusion schemes, the measurement is dependent on the current data sets only. Therefore, more of sensors are required to measure a certain physical parameter or to improve the accuracy of the measurement. However, in this research, instead of adding more sensors to the system, the temporal sequence of the data sets are stored and utilized for the accurate measurement. As a general approach of sensor fusion, a UT -Based Sensor Fusion(UTSF) scheme using Unscented Transformation(UT) is proposed for either joint or disjoint data structure and applied to the landmark identification for mobile robot navigation. Theoretical basis is illustrated by examples and the effectiveness is proved through the simulations and experiments. The newly proposed, UT-Based UTSF scheme is applied to the navigation of a mobile robot in an unstructured environment as well as structured environment, and its performance is verified by the computer simulation and the experiment.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권9호
• /
• pp.401-408
• /
• 2006

In a multi-sensor multi-target tracking systems, the local sensors have the role of tracking the target and transferring the measurements to the fusion center. The measurements from the same target can arrive out of sequence called the out-of-sequence measurements(OOSMs). Out-of-sequence measurements can arise at the fusion center due to communication delay and varying preprocessing time for different sensor platforms. In general, the track fusion occurs to enhance the tracking performance of the sensors using the measurements from the sensors at the fusion center. The target informations can wive at the fusion center with the clutter informations in cluttered environment. In this paper, the OOSM update step with MPDA(Most Probable Data Association) is introduced and tested in several cases with the various clutter density through the Monte Carlo simulation. The performance of the MPDA with OOSM update step is compared with the existing NN, PDA, and PDA-AI for the air target tracking in cluttered and out-of-sequence measurement environment. Simulation results show that MPDA with the OOSM has compatible root mean square errors with out-of-sequence PDA-AI filter and the MPDA is sufficient to be used in out-of-sequence environment.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 추계공동학술대회논문집
• /
• pp.127-132
• /
• 2002

This paper proposes a sensor-fusion technique where the data sets for the previous moments are properly transformed and fused into the current data sets to enable accurate measurement, such as, distance to an obstacle and location of the service robot itself. In the conventional fusion schemes, the measurement is dependent on the current data sets. As the results, more of sensors are required to measure a certain physical parameter or to improve the accuracy of the measurement. However, in this approach, instead of adding more sensors to the system the temporal sequence of the data sets are stored and utilized for the measurement improvement. Theoretical basis is illustrated by examples and the effectiveness is proved through the simulations. finally, the new space and time sensor fusion (STSF) scheme is applied to the control of a mobile robot in an unstructured environment as well as structured environment.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.14-23
• /
• 2005

In this paper we propose a sensor fusion method for the navigation algorithm which can be used to estimate state vectors such as position and velocity for its motion control using multi-sensor output measurements. The output measurement we will use in estimating the state is a series of known multi-sensor asynchronous outputs with measurement noise. This paper investigates the Extended Kalman Filtering method to merge asynchronous heading, heading rate, velocity of DVL, and SSBL information to produce a single state vector. Different complexity of Kalman Filter, with. biases and measurement noise, are investigated with theoretically data from MOERI's SAUV. All levels of complexity of the Kalman Filters are shown to be much more close and smooth to real trajectories then the basic underwater acoustic navigation system commonly used aboard underwater vehicle.

• Advances in aircraft and spacecraft science
• /
• 제1권4호
• /
• pp.455-469
• /
• 2014

High-precision autonomous localization technique is essential for future Mars rovers. This paper addresses an innovative integrated localization algorithm using a multiple information fusion approach. Firstly, the output of IMU is employed to construct the two-dimensional (2-D) dynamics equation of Mars rover. Secondly, radio beacon measurement and terrain image matching are considered as external measurements and included into the navigation filter to correct the inertial basis and drift. Then, extended Kalman filtering (EKF) algorithm is designed to estimate the position state of Mars rovers and suppress the measurement noise. Finally, the localization algorithm proposed in this paper is validated by computer simulation with different parameter sets.

• Journal of Astronomy and Space Sciences
• /
• 제20권4호
• /
• pp.359-364
• /
• 2003

In this paper, we present multi-sensor data fusion for telematics application. Successful telematics can be realized through the integration of navigation and spatial information. The well-determined acquisition of vehicle's position plays a vital role in application service. The development of GPS is used to provide the navigation data, but the performance is limited in areas where poor satellite visibility environment exists. Hence, multi-sensor fusion including IMU (Inertial Measurement Unit), GPS(Global Positioning System), and DMI (Distance Measurement Indicator) is required to provide the vehicle's position to service provider and driver behind the wheel. The multi-sensor fusion is implemented via algorithm based on Kalman filtering technique. Navigation accuracy can be enhanced using this filtering approach. For the verification of fusion approach, land vehicle test was performed and the results were discussed. Results showed that the horizontal position errors were suppressed around 1 meter level accuracy under simulated non-GPS availability environment. Under normal GPS environment, the horizontal position errors were under 40㎝ in curve trajectory and 27㎝ in linear trajectory, which are definitely depending on vehicular dynamics.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.177-183
• /
• 2003

Recently, Ryu et al. proposed a multiple target DOA tracking algorithm, which has good features that it has no data association problem and simple structure. But its performance is seriously degraded in the low signal-to-noise ratio. In this paper, a measurement fusion method is presented based on ML(Maximum Likelihood), and the new DOA tracking algorithm is proposed by incorporating the presented fusion method into Ryu's algorithm. The proposed algorithm has a better tracking performance than that of Ryu's algorithm, and it sustains the good features of Ryu's algorithm.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.871-877
• /
• 2018

In this paper, we propose a triple nested PID control scheme for stable hovering of a quadrotor and propose a complementary filter based sensor fusion technique to improve the performance of attitude, altitude and velocity measurement. The triple nested controller has a structure in which a double nested attitude controller that has the angular velocity PD controller in inner loop and the angular PI controller in outer loop, is nested in a velocity control loop to enable stable hovering even in the case of disturbance. We also propose a sensor fusion technique by applying a complementary filter in order to reduce the noise and drift error included in the acceleration and gyro sensor and to measure the velocity by fusing image, gyro, and acceleration sensor. In order to verity the performance, we applied the proposed control and measurement scheme to hovering control of quadrotor.