• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.223-227
• /
• 2009

The study presents two measurement split-plot models with a restricted randomization to save cost and time. Split-plot models are used to handle HTCM (Hard To Control Measurement) factors such as high temperature and long-time catalyst control. The models developed are represented by the processes for estimating the measurement precisions, that is, gauge R&R. The study also introduces three-step procedures to indentify resolution, improve R&R reduction, and evaluate the precision effect.

• Analytical Science and Technology
• /
• v.10 no.2
• /
• pp.146-152
• /
• 1997

A rapid BOD measurement system using a microbial membrane electrode has been developed. Culture of microorganism and the preparation of microbial membrane, the effect of sample flow rate on the BOD measurement, the effect of solution pH and response characteristics of the microbial membrane electrode were investigated. The rapid BOD measurement system developed by us was connected to a personal computer and the whole BOD measurement procedures were carried out automatically. The best results were obtained when the solution flow rate was 7.8mL/min and the data were obtained 5 minutes after sample injection.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.22 no.1
• /
• pp.5-10
• /
• 2011

The effect of sample handling condition on the rheological measurement of regenerated silk fibroin formic acid solution using parallel plate geometry was investigated. In case of loading method, the loading by pouring sample solution resulted in the best reproducibility of rheological measurement. Loading with spoon showed a high variance of viscosity value at low shear rate region ($0.01{\sim}1sec^{-1}$) while loading with syringe exhibited a low reproducibility of viscosity at high shear region ($1{\sim}100sec^{-1}$) with a disappearance of shear thinning phenomenon. It was revealed that the sample loading with small extra amount lead to the most reproducible result. The sample loading with the exact amount for the measuring plate resulted in a lack of reproducibility of high shear viscosity, while the loading with large extra volume produced a limited consistency of low shear viscosity. It was turned out that 3 min. of waiting time before measurement was the optimum condition for reliable result. When the waiting time was less than 1 min., the low shear viscosity was obtained with a lack of consistency. On the other hand, the sample solution started drying when the waiting time increased up to 5 min.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.1
• /
• pp.118-123
• /
• 2015

There have been various studies on measurements of flood risk and forecasting models. For river and dam region, PDF and FVI has been proposed for measurement of flood risk and regression models have been applied for forecasting model. For Bo region unlikely river or dam region, flood risk would unexpectedly increase due to outgoing water to keep water amount under the designated risk level even the drain system could hardly manage the water amount. GFI and general linear model was proposed for flood risk measurement and forecasting model. In this paper, FVI with the consideration of duration on GFI was proposed for flood risk measurement at Bo region. General linear model was applied to the empirical data from Bo region of Nadong river to derive the forecasting model of FVI at three different values of Base High Level, 2m, 2.5m and 3m. The significant predictor variables on the target variable, FVI were as follows: ground water level based on sea level with negative effect, difference between ground altitude of ground water and river level with negative effect, and difference between ground water level and river level after Bo water being filled with positive sign for quantitative variables. And for qualitative variable, effective soil depth and ground soil type were significant for FVI.

• Journal of Magnetics
• /
• v.22 no.2
• /
• pp.281-285
• /
• 2017

To suppress the wall slip effect and improve the yield stress measurement precision of magnetorheological fluid, measurement disks with different grooves are first manufactured. Then, the influence of groove characteristics on the yield stress of magnetorheological fluid is investigated by the method of experiments. Finally, the optimization wall grooves of measurement disks are obtained, and the yield stress of a self-prepared magnetorheological fluid is measured. Results indicate that the groove type and groove width have a slight influence on the shear yield stress, whereas the measured yield stress increases with enhanced groove density, and the optimized groove depth is 0.3 mm. The measured shear yield stress of self-prepared MR fluid can be improved by 18 % according to the optimized grooved disks, and the maximum yield stress can reach up to 65 kPa as the magnetic flux density is 0.5 T.

• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.215-220
• /
• 1998

We proposed an in situ measurement set-up and technique to measure the various electro-optic(E-O) properties of the E-O polymer. Using the proposed measurement set-up, the electro-optic effect and birefringence of unpoled side-chain E-O polymer induced by the strong dc and ac electric field were observed. The dependence of the E-O coefficients on the various poling conditions were measured with real time. To evaluate the thermal stability of the poled polymer the relaxation of the E-O effect was measured and the result was compared with well known polymer materials. The proposed measurement reduces the number of experimental steps and saves measurement time.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.197-205
• /
• 2022

In order to investigate the effect of an 8-week elastic band exercise program according to age on the isokinetic strength and dynamic equilibrium of the knee, 10 women under 49 years old and 10 women over 50 years old were selected. Dynamic equilibrium was measured through Y-Balance test one week before the exercise program, and power and endurance were confirmed by measuring isokinetic muscle strength of the knee. After measurement, small tool exercise was performed for 8 weeks. After 8 weeks of exercise, isokinetic muscle strength and dynamic equilibrium were measured. As a result, isokinetic muscle strength, which checks muscle strength and muscular endurance, increased after measurement than before measurement regardless of age, and dynamic equilibrium increased after measurement rather than before measurement, and the group under 49 years of age was higher than the group over 50 years old. We think that small tool exercise improves isokinetic muscle strength and is effective in neuromuscular development, improving dynamic stability ability, which is an important factor in preventing falls.

• Herbal Formula Science
• /
• v.14 no.2
• /
• pp.57-66
• /
• 2006

Objectives : The objective of this study is to observe the effect of Saryuktangkamibang, Saryuktang with Liriopis Tuber, Lycii Fructus, Schizandrae Fructus, and Bombyx Batryticatus, on the experimental diabetes. Methods : In order to induce diabetes experimentally, injected streptozotocin to the vein in the tail of rats and then treated oral administration of Saryuktangkamibang water extracts. In the measurement of the variation levels of glucose, ALP, creatinine, and BUN concentration for each concentration levels for serum (0.2g/100g, 0.4g/l00g, 0.6g/100g), concentration level of glucose significantly decreased in 0.4g/l00g concentration level of Saryuktangkamibang. With this 0.4g/l00g concentration level of Saryuktangkamibang, the following conclusion was derived from the measurement of the serum levels of glucose. ALP, AST, ALT, creatinine, and BUN concentration for the injection of each 4th, 11th, and 18th day. Results : 1. In the measurement for each concentrations, the glucose concentration level in the serum significantly decreased on the 9th day in the Saryuktangkamibang-dosed group. 2. The creatinine and BUN concentration level in the serum significantly decreased on the 9th day in the Saryuktangkamibang-dosed group to which 0.6g/100g injected. 3. In the measurement for each dosage dates, the glucose concentration level in the serum significantly decreased on the 11th day in the Saryuktangkamibang-dosed group to which 0.6g/100g injected. 4. The AST concentration level in the serum significantly decreased on the 11th day in the Saryuktangkamibang-dosed group. Conclusion : Saryuktangkamibang, Saruktang with Liriopis Tuber, Lycii Fructus, Schizandrae Fructus, and Bombyx Batryticatus, has an effect of hypoglycemia, with no hepato-renal dysfunction. For the experimental results above, in that nephrotoxicity significantly decreased on the 0.6g/100g concentration, another research such as study for effect in other ranges and study for effect of dosage term except the concentration range of this study is necessary. Also dosage of appropriate concentration of Saryuktangkamibang is thought to provide valuable aid to cure on diabetes.

• Journal of the Korean housing association
• /
• v.16 no.4
• /
• pp.73-80
• /
• 2005

A high-rise residential building experienced stack effect problems during the winter such as difficulties in opening residential entrance doors and whistling noise from elevator doors generated by airflow. Field measurements were carried out on the building and the problems were verified by the analysis of the measurement results from three points of view: the total stack pressure difference, pressure distribution on each floor, and the location of the neutral pressure level. Based on the analysis of the three key parameters, possible solutions were proposed, such as zoning vertical shafts, lessening the airflow from the entrance doors on basement floors and lobby floor by installing vestibules, improving the airtightness of exterior walls, and installing separation doors where the problems occur. Simulations of proposed solutions were conducted and the effects of reducing the pressure difference were evaluated. Stack effect problems in a high-rise residential building were verified through field measurements and could be mitigated by the solutions which were drawn from the analysis of the field measurements and the simulation results.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.5
• /
• pp.5-11
• /
• 2011

In this study, the effect of cone angle of seven-hole probe on the accuracy of measured flow angle and velocity has been investigated. The seven-hole probe consisted of seven 1mm OD stainless inner tubes and one 3mm ID stainless tube. Six cone angles of $45^{\circ}$, $60^{\circ}$, $75^{\circ}$, $90^{\circ}$, $105^{\circ}$ and $120^{\circ}$ were tested. Calibrations of the seven-hole probes were conducted within ${\pm}60^{\circ}$ range with the interval of $5^{\circ}$. Analysis results show that the effect on the cone angle was not significant on the accuracy of the measured flow angle, pressure, and velocity. However, the data reduction method had more effect on the measurement accuracy.