• Journal of Korean Society for Quality Management
• /
• v.22 no.2
• /
• pp.41-50
• /
• 1994

Consider a canning process where cans are filled with an expensive ingredient. Cans weighting above the specified limit are sold in a regular market for a fixed price, and underfilled cans are emptied and refilled at the expense of a reprocessing cost. In this paper, the effect of measurement error on the determination of the optimal process mean for a canning process is examined. It is assumed that the quantity X of ingredient in a can is normally distributed with unknown mean and known variance, and the observed value Y of X is also normally distributed with known mean and variance. A profit model is constructed which involves selling price. cost of ingredients, reprocessing cost. and cost from an accepted nonconforming can, and methods of finding the optimal process mean and the cutoff value on Y are presented. It is shown that the optimal process mean increases. and the expected profit decreases when the measurement error is relatively large in comparison to the process variance.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.61
• /
• pp.89-98
• /
• 2000

For statistical process control, the process data are collected by the measurement system. But, the measurement system may have instrument error or/and operator error. In the measured values of products, the total observed variance consists of process variance and variance due to error of measurement system. In this paper, we design more practical T-s control chart considering estimated measurement error The effects of measurement error on the expected total cost and design parameters are investigated.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1989.10a
• /
• pp.31-36
• /
• 1989

Low-cost and automated isolux diagram measurement system are investigated. The system is constructed with illuminance measurement array, analog multiplexer, A/D converter and 16-bit microcomputer. The experimental results show good agreement with the measured illuminance values. Decreasing the measure-spacing, the more accurate diagram can be obtained.

• Journal of Korean Academy of Nursing
• /
• v.34 no.3
• /
• pp.449-457
• /
• 2004

Purpose: The aim of this study was to analyze economical efficiency of home care service by comparing a cost-utility ratio(CUR) between home care and hospitalization. Method: The analytic framework of this study was constructed in 5 stages: Identifying the analytic perspectives, measurement of costs, measurement of utility, analysis of CUR, and sensitivity test. Data was collected by reviewing medical records, home care service records, medical fee claims, and other related research. Result: The mean of the annual total cost was 23,317,636 Won in home care and 73,739,352 Won in hospital care. QALY was 0.389 in home care and 0.474 in hospital care, so CUR was 299,712,545 QALY in home care and 777,841,266 QALY in hospital care. Conclusion: The findings affirmed that home care had an economical efficiency in the aspect of utility compared to hospitalization. Therefore, the findings of this study can be used to develop a governmental health policy or to expand the home care system. In addition, the cost-utility analysis framework and process of this study will be an example model for cost-utility analysis in nursing research. Therefore, it will be used as a guideline for future research related to cost-utility analysis in nursing.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.33
• /
• pp.161-171
• /
• 1995

When physical distribution cost can be correctly measured, its management can also be efficient. Thus the primary objective of the study is to develop systems for measuring correctly physical distribution cost. The systems have two aspects : the One is the consumption of the resourses(materials, labor service, the other services), the other is the creation of physical distribution services(transportation, storage, cargo, packing, distribution conversion, management). By measuring the cost through the systems, the commoditization of the physical distribution services is possible and measurement of the cost and revenue can also be reasonable ,which makes its management efficient.

• Journal of Digital Convergence
• /
• v.8 no.4
• /
• pp.185-204
• /
• 2010

This case study quantifies the savings that can be realized through integration in National Computing & Information Agency (NCIA) of the Korea Government. It is based on the process of the NCIA development project that consolidating and integrating distributed 24 agencies. And it used the widely accepted Gartner TCO (Total Cost of Ownership) Solution and applies that methodology consistently before and after integration. Specific measurement items for examining the information system integration saving cost are developed pilot test for 2 agencies through compare TCO before integration and TCO after integration. The results of measuring on information system integration in NCIA are showed lots of economic cost reduction in TCO by integrating and consolidating each computing environment in agency. Especially in detail, NCIA realized the most savings in IT Capital Cost including development of hardware, software and recovery system. Also IT Support Cost and IT Administration Cost examined more savings than before IT integration.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.163-167
• /
• 2009

Although the domestic electric power consumption of lighting have shared 20${\sim}$30 % of the national electric power consumption, the spread of lighting control system which can reduce the electric power consumption have been insignificant. The government have set the demonstration project and given the incentive to promote the spread of lighting control system since 2008. The M&V (Measurement and Verification) methodology for lighting control system have not been set yet in our country, but the direct measurement was suggested in US. The direct measurement methodology can increase the accuracy of measurement, but it cost much money to burden a customer. This study have suggested a new M&V methodology which cost low and is simple relatively. I had measured the amount of electric consumption through both the direct measurement and the new M&V program computation, and have analyzed the deviation. The amount of electric consumption measured by the new M&V program computation have agreed with one by the direct measurement within the error range of the instrumentation in case of lab scale test, and the 4${\sim}$8 % deviation have existed in case of field evaluation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1136-1141
• /
• 2014

This paper proposes a new contact type ball tracking sensor to improve the control performance of a low cost ball-and-beam system. It is well-known that the impulsive measurement noise contained in ball position measurement is one of the factors which severely degrades the ball-and-beam control performance. The impulsive ball position measurement noises often appear under the sporadical ball floating on the beam. This fact motivates us to devise a simple analog preprocessing circuit to determine whether the ball loses the contact or not. Once the abnormal ball position measurement is detected, the design problem of the ball tracking sensor can be cast into the typical state estimation problem with missing data. In order to tackle the real-time implementation issue, a steady-state Kalman filter is applied to the problem. Through the experimental results, the usefulness of the proposed scheme is demonstrated.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.1
• /
• pp.69-77
• /
• 2009

Recently, a research of the urban regeneration has been performed very actively. This is one of the efforts to resolve various social and economic problems coming from the existing deteriorated building and facilities by new urban development or redevelopment. However, an urban regeneration has a characteristic to be unable to ensure the project performance due to the exposed numerous risks coming from the various and complex stake-holders, and its mega sizes. This paper proposes the method of risk performance index in order to improve an efficiency of performance measurement expanding to the risk view point from the existing integrated cost/schedule performance measurement. A risk performance index is compatible with the existing EVMS, and can make the performance measurement in 3 dimensions of the integrated cost/schedule/risk with 18 sub-indexes and variables.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.72-76
• /
• 2015

Capital project benchmarking requires an effective cost normalization process to compare cost performance of projects accomplished in different time and location. Existing cost normalization approaches have been established based on the assumption that all required information for cost normalization is fully identified once a project is completed. Cost normalization, however, is sometimes required to evaluate phase-level outcomes of an ongoing project where the required information is not fully available. This paper aims to provide a cost normalization procedure for phase-based performance assessment. The procedure consists of three normalization steps: currency conversion, location adjustment, and time adjustment considering various scenarios where the required information is not fully identified. This paper also presents how the cost normalization procedure has been applied to the 10-10 Performance Assessment Program, which is a phase-based performance assessment system developed by the Construction Industry Institute (CII). Both researchers and industrial professionals can apply the cost normalization procedure to studies and practices regarding to cost estimation, feasibility analysis, and performance assessment.