• Transactions of Materials Processing
• /
• v.26 no.6
• /
• pp.356-364
• /
• 2017

In this study, submerged arc cladded Fe-Cr-Ni-Mo-CuWNbV-C stainless steels containing various Cr contents between 11.2 wt.% and 16.7 wt.% were prepared with fixed C content at about 0.14 wt.%. Using these alloys, changes in microstructure, tensile property, and thermal fatigue property were investigated. Phase fraction of delta-ferrite was increased gradually with increasing Cr content. However, tensile strength, hardness, and thermal fatigue resistance appeared to be decreased. When the microstructure of delta-ferrite was observed, it was revealed that the mesh structure retained up to about 15% Cr content. Although thermal fatigue resistance was almost the same for Cr contents between 11.0 and 14.5 wt.%, it was significantly decreased at higher Cr contents. This was evident from mean value of crack lengths of 10 largest ones. Evaluation of thermal fatigue resistance on alloys with various Cr contents revealed the following important results. First, the reproducibility of ranking test was excellent regardless of the number of cycles. Second, thermal fatigue resistance was increased in proportion to true tensile fracture strength values of overlay materials. Finally, the number of thermal fatigue cracks per unit length was increased with increasing true tensile fracture strength.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.19-29
• /
• 1998

The calcination reactivity of limestone and physical property changes of calcined lime were investigated with a temperature($720~1000^{\circ}C$ under atmospheric gas($N_2$, $CO_2$) conditions. The mechanisms of mass transport in a lime matrix were represented by the evaporation and condensation (${\gamma}=1.7$) at $1000^{\circ}C$ and the volume diffusion (${\gamma}=2.7$) at $800^{\circ}C$, which was obtained by the specific surface area of calcined lime with sintering conditions. Also, the effect of physical property on the reactivity of sulfation reaction was determined by the changes of pore size with $lime-SO_2$ reaction in this work. The initial sulfation rate of calcined lime increased with increasing temperature, whereas the capture capacity of $SO_2$ exhibited a maximum value at $900^{\circ}C$. The pore volume of sulfated lime was decreased with increasing sulfation time, but the major pores shifted to the distribution of larger size at a temperature of $850{\;}~{\;}1000^{\circ}C$. The mean pore size of sulfated lime based on pore volume decreased gradually at $1000^{\circ}C$; however, it increased with sulfation time up to 40 min and rapidly decreased thereafter.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.2
• /
• pp.291-311
• /
• 2009

Intellectual Property(IP) investment and its management are an key driver to create corporate value and intangible asset value through corporate's competitiveness. The purposes of this study are to survey capability of IP management and assess the effects of IP investment and its management on the separation into groups of intangible asset value. In order to attain those purposes of this study, sample companies were taken and categorized into three groups by the level of intangible asset value ratio, and data for IP investment such as R&D expenditure and advertising expenditure were collected from 90 manufacturing companies, and data for IP management capability about patent, design and brand were taken through survey. The final results showed as followed: First, IP management capability were generally not sufficient in the results of survey. Second, mean vector for the four variables were significantly different among three groups in multivariate analysis variance. Third, the order of their contribution to separating the groups were R&D expenditure, advertising expenditure, patent management, management of design and brand in canonical variate analysis. Fourth, R&D and patent management capability were significantly related to the separation of three groups, while advertising expenditure were not significant and management of design and brand were not sure of Significance in multinomial logit discriminant analysis. Fifth, exploratory power of the discriminant model were estimated by 53% in classification analysis. Finally, strategic policy for IP investment and its management should be taken urgently to create intangible asset value and to improve the capability of its management.

• Computational Structural Engineering
• /
• v.8 no.1
• /
• pp.127-136
• /
• 1995

In this paper the stochastic FE analysis considering the material and geometrical property of the plate structure is performed by the weighted integral method. To consider the stochasity of the material and geometrical property, the stochastic field is assumed respectively. The mean value of the stochastic field is 0 and the value of variance is assumed as 0.1. The characteristics of the assumed stochastic field is represented by auto-correlation function. This auto-correlation function is used in evaluating the response variability of the plate structure. In this study a new auto-correlation function is derived to concern the uncertainty of the plate thickness. The newly derived auto-correlation function is a function of auto-correlation function and coefficient of variation of the assumed stochastic field. The two results, obtained by proposed Weighted Integral method and Monte Carlo Simulation method, are coincided with each other and these results are almost equal to the theoretical result that is derived in this study. In the case of considering the variability of plate thickness, the obtained result is well coincide with those of Lawrence and Monte Carlo simulation.

• The Mathematical Education
• /
• v.50 no.4
• /
• pp.489-505
• /
• 2011

This study is an analysis on the focus of textbooks regarding the statistical chapters of "measures of representative(central tendency) and of the spread". Applying the summary-concept criteria of Juhyeon Nam(2007), 4 kinds of aspect of the chapter; (1) definition and its teleological validity of the measures of representative, (2) definition and practical value of the measures of spread (3) distributional form on the measures of representative and of spread (4) location and scale preservation or invariance of the measures of representative and of spread were observed. On the measures of representative, some definitions were insufficient to check the teleological validity of the measure. Most definitions of the measure of spread were based on the practical view points but no preparation for the future statistical inferences were found even by implication. Some books mention about the measures of representative and of spread for distributions, but we could not find any comments on the correspondence between the sample mean and the expectation of a distribution or population mean. However it is stimulant that some books check the validity of corresponding measures with the location and scale preservation or invariant property, that were not found in the previous curriculum.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.9
• /
• pp.1207-1214
• /
• 1995

We present an optimized integer cosine transform(OICT) as an alternative approach to the conventional discrete cosine transform(DCT), and its fast computational algorithm. In the actual implementation of the OICT, we have used the techniques similar to those of the orthogonal integer transform(OIT). The normalization factors are approximated to single one while keeping the reconstruction error at the best tolerable level. By obtaining a single normalization factor, both forward and inverse transform are performed using only the integers. However, there are so many sets of integers that are selected in the above manner, the best OICT matrix obtained through value minimizing the Hibert-Schmidt norm and achieving fast computational algorithm. Using matrix decomposing, a fast algorithm for efficient computation of the order-8 OICT is developed, which is minimized to 20 integer multiplications. This enables us to implement a high performance 2-D DCT processor by replacing the floating point operations by the integer number operations. We have also run the simulation to test the performance of the order-8 OICT with the transform efficiency, maximum reducible bits, and mean square error for the Wiener filter. When the results are compared to those of the DCT and OIT, the OICT has out-performed them all. Furthermore, when the conventional DCT coefficients are reduced to 7-bit as those of the OICT, the resulting reconstructed images were critically impaired losing the orthogonal property of the original DCT. However, the 7-bit OICT maintains a zero mean square reconstruction error.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.187-192
• /
• 2002

In this paper we consider an M/G/1 queueing system with vacation. The length of vacation period may be controlled by the waiting time of the first customer. The server goes on vacation as soon as the system is empty, and resumes service either when the waiting time of the leading customer reaches a predetermined value, or when the vacation period is expired, whichever comes first. We consider two types of vacation, say, multiple vacation type and N-policy type. We derive the steady-state distributions of the number of customers at arbitrary time and arbitrary customer's waiting time by means of decomposition property. Also, the mean lengths of busy period, idle period and a cycle time are given.

• Korean Journal of Mathematics
• /
• v.28 no.3
• /
• pp.449-457
• /
• 2020

We focus on the interations of the weighted Berezin transform T_α on L^p(τ), where τ is the invariant measure on the complex unit ball B_n. Iterations of T_α on L¹_R(τ) the space of radial integrable functions played important roles in proving 𝓜-harmonicity of bounded functions with invariant mean value property. Here, we introduce more properties on iterations of T_α on L¹_R(τ) and observe differences between the iterations of T_α on L1(τ) and L^p(τ) for 1 < p < ∞.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.77-82
• /
• 2003

A parametric study was conducted on pressure drop in a catalytic converter for automobile. In this work, we proposed a new pressure drop relation which contains the various parameters needed to calculate and got a few results. In a monolith of catalyst, the flow originally turbulent flow changes to laminar flow and thus the pressure drop through the monolith is linearly proportional to the velocity. The exhaust pressure is doubly affected by the increase of mean velocity and length when we decrease the diameter of monolith while the volume keeps constant. Theoretical parameters such as $\alpha$ and $\beta$ are suggested to use as a reference value when there is no a experimental data. Especially in the part load test, these values should be modified to consider the property change of exhaust gas.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.441-444
• /
• 1992

In this paper, for tracking and filtering seaway information which act as a control disturbance the adaptive notch filter which removes disturbance with fast convergence and stability without changing the value of gain parameter $\mu$ when statistical property of input signal varies rapidly is designed by improving conventional RMXMS(Recursive Maximum Mean Square) algorithm. Besides, in consideration of measurement noise of sensors in underwater vehicle, the system which removes the noise and the disturbance is suggested.