• 디지털산업정보학회논문지
• /
• 제10권2호
• /
• pp.1-11
• /
• 2014

Software reliability in the software development process is an important issue. Software process improvement helps in finishing with reliable software product. In this field, SPC (Statistical process control) is a method of process management through application of statistical analysis, which involves and includes the defining, measuring, controlling, and improving of the processes. The proposed process involves evaluation of the parameter of the mean value function and hence the values of the mean value function at various inter failure times to develop relevant time control chart. In this paper, was proposed a control mechanism, based on time between failures observations using Rayleigh and Burr distribution property, which is based on Non Homogeneous Poisson Process (NHPP). In this study, the proposed model is reliable in terms of hazard function, because it is more efficient in this area can be used as an alternative to the existing model. Through this study, software developers are considered by the various intended functions, prior knowledge of the software to identify failure modes to feed to some extent shall be able to help.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.456-459
• /
• 2007

Thermal conductivities (TC) of 57 Jurassic muscovitic granite samples (KIGAM) and 149 porphyritic granite samples (Yeonki: BE-2, BE-3) were measured with LFA-447. Ranges of TC values are $2.429{\sim}3.878$ W/mK (KIGAM), $2.220{\sim}3.767$ W/mK (Yeonki, BE-2) and $2.019{\sim}3.990$ W/mK (Yeonki, BE-3); arithmetic means are 2.924 W/mK (KIGAM), 2.907 W/mK (Yeonki, BE-2), and 2.881 W/mK (Yeonki, BE-3), respectively. In this study, harmonic mean values were calculated to estimate the average value of TC. Harmonic mean values are 2.883 W/mK (KIGAM), 2.886 W/mK (Yeonki, BE-2), and 2.866 W/mK (Yeonki, BE-3), respectively. Heat extraction rates of a borehole heat exchanger strongly depend on TC values. Heat-extraction rates from re values are expected to be a little lower than 84 W/m in all sites. However, considering ground water flow, it is expected that actual heat extraction rate would be higher than the expected value.

• 한국정보통신학회논문지
• /
• 제13권3호
• /
• pp.451-457
• /
• 2009

컴퓨터그래픽스에서 다루어지는 대부분의 물체들은 메쉬 형태로 표현된다. 보다 다양한 형태로의 변형이나 현실감 있는 렌더링을 얻기 위해서는 정점에서의 올바른 법선벡터 계산이 필수적이다. 이에 대한 기존 연구들은 정점의 기하학적 특성을 단순하게 반영하는 가중치를 사용하였다. 본 논문에서는 국지적 기하학 특성을 종합적으로 반영하는 등각사상과 이웃 정점과의 상호관계를 연속적으로 표현할 수 있는 중간값 좌표계를 사용하는 방법을 제안한다. 논문에서 제시된 방법이 기존 다른 방법에 비해서 보다 정확한 법선벡터를 계산할 수 있음을 실험을 통해서 알 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.766-771
• /
• 2000

This study is mainly concerned with friction and wear properties for the piston ring of non-lubricating air compressor which made of PTFE-polyimide composites. At the PTFE and polyimide alone mixture specimens, PTFE80%-polyimide20%, which shows the lowest men friction coefficient and specific wear rate at 0.94m/s sliding speed. At each of carbon, copper and oxide lopper mixed with PTFE80%-polyimide20%. In case of copper10%, at 0.94m/s sliding speed, the mean friction coefficient shows 0.087, which is the lowest value in all specimens. In case of the specific wear rate, copper30% specimen shows the lowest value of $2.537E-5(mm^3/Nm)$ in all specimens.

• 한국의류학회지
• /
• 제26권1호
• /
• pp.160-167
• /
• 2002

Stretch fabrics are wide-spread for high performance clothing use with requirements of fitness and adaptability to human's movement. A newly developed 100% PET high stretch fabric has excellent properties with respect to stretch, softness, bulkiness, and apparent volume compared to PET filament fabrics. The 100% PET high stretch fabric shows advantages of a dimensional stability, dye and agent adaptability in dying and finishing process, a property of stretch recovery after washing and lower production cost than that of spandex fabric. KES-FB was used to measure mechanical properties to various directions of the fabric. This study centered on whether the 100% PET high stretch fabric is suitable to quality and shape retention of fabric by testing several properties including tensile, compression, shear, bending and surface characteristic to various measuring directions. Tensile linearity showed maximum value at $0^{\circ}$ in plain and $90^{\circ}$ in twill. Shear Stiffness of plain and twill showed maximum value equally at $45^{\circ}\;and\;135^{\circ}$. Bending rigidity showed maximum value at $0^{\circ}$ in plain and $45^{\circ}$ twill. Mean deviation of MIU showed maximum value at $0^{\circ}\;and\;90^{\circ}$ in plain and $135^{\circ}$ in twill.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.1049-1061
• /
• 2022

Neutron and gamma-ray shielding properties of Inconel 718 reinforced B₄C (0-25 wt%) were investigated using PSD software. Mean free path (MFP), linear and mass attenuation coefficients (LAC,MAC), tenth-value and half-value layers (TVL,HVL), effective atomic number (Z_eff), exposure buildup factors (EBF), and fast neutron removal cross-sections (FNRC) values were calculated for 0.015-15 MeV. It was found that MAC and LAC increased with the decrease in the content of B₄C compound by weight in Inconel 718. The EBFs were computed using G-P fitting method for 0.015-15 MeV up to the penetration depth of 40 mfp. HVL, TVL, and FNRC values were found to range between 0.018 cm and 3.6 cm, between 2.46 cm and 12.087 cm, and between 0.159 cm^-1 and 0.194 cm^-1, respectively. While Inconel 718 provides the maximum photon shielding property since it offered the highest values of MAC and Z_eff and the lowest value of HVL, Inconel 718 with B₄C(25 wt%) was observed to provide the best shielding material for neutron since it offered the highest FNRC value. The study is original in terms of several aspects; moreover, the results of the study may be used in nuclear technology, as well as other technologies including nano and space technologies.

• 한국통신학회논문지
• /
• 제32권11C호
• /
• pp.1127-1133
• /
• 2007

제안된 알고리즘은 QR 형태의 LMS 알고리즘이 입력의 분산에 비례하게 되어있어 입력의 분산을 평균적인 측면에서 입력의 분산을 정규화하는 알고리즘중 하나이다. 본 논문에는 정규화 알고리즘의 수렴 특정 분석이 되어있다. 제안한 알고리즘의 성능분석을 위하여 간단한 FIR 시스템의 시스템 식별을 수행하였다. 이때 성능 비교에 참여한 알고리즘은 LMS, NLMS(normalized least mean square) 알고리즘이다. 그 결과 제안한 알고리즘은 NLMS 알고리즘과 매우 유사한 성능을 가짐을 확인하였다.

• 터널과지하공간
• /
• 제13권5호
• /
• pp.397-402
• /
• 2003

일반적으로 암반의 물성은 암반이 가지고 있는 불확실성이란 특성 때문에 하나의 대표치로 표현되는 것보다는 어느 정도의 분산성을 포함하는 값으로 표현되는 것이 타당하다. 이러한 특성은 지하구조물 설계에 중요한 부분이지만 아직까지 잘 정립되지 못한 부분이다. 확률유한요소법은 결정론적 유한요소법에 대비되는 말로써 구조계의 불확실성을 해석에 반영하기 위해 개발된 방법이다. 따라서, 이 방법을 이용하면 구조계의 응답 변화도를 얻을 수 있고 이를 통하여 확률적 안정성 분석이 이루어 질 수 있다. 본 연구에서는 암반물성(변형계수)을 평균과 표준편차로 정의되는 확률변수로 표현하여 정수압상태의 암반에 원형공동이 굴착될 경우 변위의 응답변화도를 분석하였다. 분석된 변위의 응답변화도는 변형계수의 표준편차에 따라 상당한 편차를 보이고 있어 신뢰성 있는 변형계수의 평균과 표준편차를 이용한 지하구조물의 확률적 안정성 분석이 이루어져야 할 필요성을 보여주고 있다.

• 복식
• /
• 제58권4호
• /
• pp.26-34
• /
• 2008

The purpose of this study was to create a database of information on the mechanical properties of two different waterproof and breathable shell fabric groups(high density woven and PTFE laminate) used for outdoor apparel and to compare and correlate data of their mechanical properties and hand values. The results of this study were as follows; There were no statistically significant differences between two fabric groups in extension, bending and shearing properties. There were statistically significant differences between two fabric groups in MMD, SMD, LC and we values. High density woven fabrics had smoother surface than PTFE laminated fabrics. PTFE laminated fabrics can be compressed easily more than high density woven fabrics but their recovery after compression was not better than high density woven fabrics. There were statistically significant differences between two fabric groups in NUMERI, FUKURAMI. There was statistically significant difference between two fabric groups in total hand value. Total hand value and mean deviation of MIU had a very high and statistically significant negative correlation coefficient.

• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.382-388
• /
• 2007

Statement of problem. The role of calcium sulfate in stimulating the growth of gingival soft tissue has been reported in few studies. Such a unique property of calcium sulfate could serve as a trouble-solving broker in compensating for the lack of soft tissues in various oral surgeries. Purpose. The purpose of this study was to compare the proliferating activities of human gingival fibroblasts seeded on various bone graft barrier materials of calcium sulfate, collagen, and polytetrafluorethylene (PTFE). Material and methods. Two calcium sulfates ($CAPSET^{(R)}$. and $CalForma^{(R)}$, Lifecore Biomedical Inc., St. Paul, Minnesota, USA), a resorbable natural collagen ($Bio-Gide^{(R)}$, Geistlich Pharma Ag., Wolhusen, Switzerland), and a non-resorbable PTFE ($TefGen-FD^{(R)}$, Lifecore Biomedical Inc., St. Paul, Minnesota, USA) served as the human gingival fibroblasts' substrates and comprised the four experimental groups, whereas the untreated floors of culture plastics were used in the control group, in this study. Cells were trypsinized, seeded, and incubated for 48 h. The proliferating activities of fibroblasts were determined by XTT and SRB assay and absorbance (optical density, OD) was measured. One-way ANOVA was used to analyze the differences in the mean OD values between the groups of CAPSET, CalForma, Bio-Gide, TefGen, and the control (p<0.05). Results. From the XTT assay, the mean OD value of the control group, the highest, was significantly greater than that of any of the four experimental groups followed by CalForma, CAPSET, TefGen, and Bio-Gide. Further, the mean OD value of CalForma, was significantly greater compared to that of Bio-Gide. From the SRB assay, Calforma showed the highest mean OD value, which was significantly greater than that of any other groups, followed by the control, CAPSET, Bio-Gide, and TefGen. The mean OD values of both the control and CAPSET were significantly greater compared to that of TefGen (p<0.05). Conclusion. Assessment of the viability and proliferation of cultured fibroblasts seeded and incubated for 48 h on various barrier-material substrates using XTT and SRB assay showed that calcium sulfate $CalForma^{(R)}$ promotes the proliferating activity of human gingival fibroblasts.