• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1342-1349
• /
• 2023

The planning accuracy of charged particle therapy (CPT) is subject to the accuracy of stopping power (SP) estimation. In this study, we propose a method of deriving a pseudo-triple-energy CT (pTECT) that can be achievable in the existing dual-energy CT (DECT) systems for better SP estimation. In order to remove the direct effect of errors in CT values, relative CT values according to three scanning voltage settings were used. CT values of each tissue substitute phantom were measured to show the non-linearity of the values thereby suggesting the absolute difference and ratio of CT values as parameters for SP estimation. Electron density, effective atomic number (EAN), mean excitation energy and SP were calculated based on these parameters. Two of conventional methods were implemented and compared to the proposed pTECT method in terms of residuals, absolute error and root-mean-square-error (RMSE). The proposed method outperformed the comparison methods in every evaluation metrics. Especially, the estimation error for EAN and mean excitation using pTECT were converging to zero. In this proof-of-concept study, we showed the feasibility of using three CT values for accurate SP estimation. Our suggested pTECT method indicates potential clinical utility of spectral CT imaging for CPT planning.

• Journal of Nutrition and Health
• /
• v.33 no.4
• /
• pp.438-453
• /
• 2000

The purposes of this study were to estimate nutritional intakes of the long-lived elderly and to obtain the data for establishing dietary guidelines that may be recommended for the general population for the sake of longevity. The subjects of the study were 300 elederly people of age over 85 years living in Kyungpook Sung-Ju area who had no problem in daily living. Four times of food consumption survey were carried out seasonally by the repeated 24-hr recall method for one year. Mean daily energy intakes and RDA percentage of energy intakes of the male and female subjects were estimated as 1222 kcal(67.9%) and 1047 kcal(65.4%) respectively. Mean daily intakes of nutrients were estimated as 38.3g for protein, 287mg for calcium, 5.8mg for iron, 314R.E. for vitamin A, 0.6mg for vitamin B1 and 0.43mg for vitamin B2 The mean RDA percentages of nutrients intake were 64.4% and 59.8% for protein in male and female, 39.8% for Ca, 48.3% for Fe, 44.9% for vitamin A, 60% for vitamin B1, and 35.8% for B2. The average PFC ratio of energy-yielding nutrients throughout the year in male and female were 15.1 : 15.2 : 69.7 and 13.8 : 13.2 : 73.0 respectively. The mean daily intakes of energy and most of nutreints were significantly high in winter season. The contribution of plant food sources to nutrient intakes were over 60% for protein and fat, 50% for calcium, and 70% for iron. Long-lived elderly people an Sung-Ju, Kyungpook showed considerably smaller physiques compared to the avergae Korean elderly, however their average BMI fell in normal range. The subjects were consuming much less energy and nutrients compared to the present Korean RDA for the elderly over age 75. The subject showed relatively good health state in spite of low intakes of energy and nutrients. Therefore it seems to be necessary to establish a set of new RDA for the elderly over age 8.5.

• Journal of Radiation Protection and Research
• /
• v.43 no.1
• /
• pp.10-19
• /
• 2018

Background: Monte Carlo (MC) simulation is the most accurate for calculating radiation dose distribution and determining patient dose. In MC simulations of the therapeutic accelerator, the characteristics of the initial electron must be precisely determined in order to achieve accurate simulations. However, It has been computation-, labor-, and time-intensive to predict the beam characteristics through predominantly empirical approach. The aim of this study was to analyze the relationships between electron beam parameters and dose distribution, with the goal of simplifying the MC commissioning process. Materials and Methods: The Varian Clinac 2300 IX machine was modeled with the Geant4 MC-toolkit. The percent depth dose (PDD) and lateral beam profiles were assessed according to initial electron beam parameters of mean energy, radial intensity distribution, and energy distribution. Results and Discussion: The PDD values increased on average by 4.36% when the mean energy increased from 5.6 MeV to 6.4 MeV. The PDD was also increased by 2.77% when the energy spread increased from 0 MeV to 1.019 MeV. In the lateral dose profile, increasing the beam radial width from 0 mm to 4 mm at the full width at half maximum resulted in a dose decrease of 8.42% on the average. The profile also decreased by 4.81% when the mean energy was increased from 5.6 MeV to 6.4 MeV. Of all tested parameters, electron mean energy had the greatest influence on dose distribution. The PDD and profile were calculated using parameters optimized and compared with the golden beam data. The maximum dose difference was assessed as less than 2%. Conclusion: The relationship between the initial electron and treatment beam quality investigated in this study can be used in Monte Carlo commissioning of medical linear accelerator model.

• New & Renewable Energy
• /
• v.18 no.1
• /
• pp.17-28
• /
• 2022

This paper presents an effective Markov transition matrix (EMTM), which will be used to calculate the wind speed at the target site in a wind farm to accurately predict wind energy production. The existing MTS prediction method using a Markov transition matrix (MTM) exhibits a limitation where significant prediction variations are observed owing to random selection errors and its bin width. The proposed method selects the effective states of the MTM and refines its bin width to reduce the error of random selection during a gap filling procedure in MTS. The EMTM reduces the level of variation in the repeated prediction of wind speed by using the coefficient of variations and range of variations. In a case study, MTS exhibited better performance than other MCP models when EMTM was applied to estimate a one-day wind speed, by using mean relative and root mean square errors.

• Journal of the Korean Vacuum Society
• /
• v.8 no.2
• /
• pp.102-110
• /
• 1999

The LIGA X-ray exposure step was modelled into three inequalities, by assuming that the X-ray energy attenuated within a resist is deposited only in the localized range of the resist. From these inequalities, equations for the minimum and maximum exposure times required for a good quality microstructure were obtained. Also, an equation for the thickness of an X-ray mask absorber was obtained from the exposure requirement of threshold dose deposition. The calculation method of the synchrotron radiation power from a synchrotron radiation source was introduced and applied to an X-ray exposure step. A power from a synchrotron radiation source was introduced and applied to an X-ray exposure step/ A power function of photon energy, approximating the attenuation length of the representative LIGA resist, PMMA, and the mean photon energy of the XZ-rays incident upon an X-ray mask absorber were applied to the above mentioned equations. Consequently, the tendencies of the minimum and maximum exposure and with respect to mean photon energy and thick ness of PMMA was obtained. Additionally, the tendencies of the necessary thickness of PMMA and photon energy of the X-ray mask absorber with respect to thickness of PMMA and photon energy of the X-rays incident upon an X-ray mask absorber were examined. The minimum exposure time increases monotonically with increasing mean photon energy for the same total power density and is not a function of the thickness of resist. The minimum exposure time increases with increasing mean photon energy for the same total power density in the case of the general LIGA process, where the thickness of PMMA is thinner than the attenuation length of PMMA. Additionally, the minimum exposure time increases monotonically with increasing thickness of PMMA. The maximally exposable thickness of resist is proportional to the attenuation length of the resist at the mean photon energy with its proportional constant of ln $(Dd_m/D_{dv})$. The necessary thickness of a gold X-ray mask absorber due to absorption edges of gold, increases smoothly with increasing PMMA thickness ratio, and is independent of the total power density itself. The simplicity of the derived equations has made clearly understandable the X-ray exposure phenomenon and the correlation among the exposure times, the attenuation coefficient and the thickness of an X-ray mask absorber, the attenuation coefficient and the thickness of the resist, and the synchrotron radiation power density.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.1-13
• /
• 1993

The three-dimensional numerical analysis for in-cylinder flow of four-valve engine without intake port has been successfully computed. These computations have been performed using technique of the general coordinate transformation based on the finite-volume method and body-fitted non-orthogenal grids using staggered control volume and covariant variable as dependent one. Computations are started at intake valve opening and are carried through top-dead-center of compression. A k-$\varepsilon$model is used to represent turbulent transport of momentum. The principal study is the evolution of interaction between mean flow and turbulence and of the role of swirl and tumble in generating near TDC turbulence. Results for three different inlet flow configuration are presented. From these results, complex flow pattern may be effective for promoting combustion in spark-ignition engines and kinetic energy of mean flow near TDC is well converted into turbulent kinetic energy.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.181-191
• /
• 2002

The homogenization method is applied to maximize crash energy absorption for a given volume. Optimization analysis off closed-hat type example problem is conducted with different impact velocities and thicknesses. The results show that the bending-type deformation for the original design is changed to the folding-type deformation for a new design with a hole, which is partly due to the increase of the crash energy absorption for the new design. Dynamic mean crushing loads of the original and new design are compared with those by the theoretical equation by Wierzbicki. It shows that the dynamic mean crushing loads of new designs are very close to those by Wierzbicki's equation.

• Journal of the Korean Society of Safety
• /
• v.17 no.2
• /
• pp.1-7
• /
• 2002

In this paper, the maximum minimum strain energy density criterion was applied to the mixed mode fatigue test of A5052 H34 alloy. In this study result we can have seen that the authors stress intensity factor for the finite width specimen and method of determining testing load, based on the plastic zone size and the limited maximum stress intensity factor by ASTM STANDARD E-647-95, is useful.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.4
• /
• pp.130-137
• /
• 1993

In this paper, A progressive coding of mean difference pyramid by Hadamard transform of the difference between two successive pyramid levels has been studied. A block adaptive bit allocation method based on ac energy of each sub-block has been proposed, which efficiently reduces the final distortion in the progressive transmission of image parameters. In our scheme, the dc energy equals the sum of the quantization errors of the Hadamard transform coefficients at previous level. Therefore proposed allocation method includes the estimation of dc energy at each pyramid level. Computer simulation results show some improvements in terms of MSE and picture quality over the conventional fixed allocation scheme.

• International Journal of High-Rise Buildings
• /
• v.1 no.2
• /
• pp.73-80
• /
• 2012

In order to use sea breezes to counter the heat island phenomena, i.e. to promote urban ventilation, it is necessary to clarify the effect of building morphology and height on large-scale wind fields. In this study, the sea breeze in the vicinity of the Kanto Plain in Japan is simulated using a mesoscale meteorological model incorporating an urban canopy model, and the inland penetration of sea breezes is accurately reproduced. Additionally, a mean kinetic energy balance within a domain (Control Volume; CV) moving along the sea breeze is analysed. From the results, it is clarified that the sea breeze is interrupted by the resistance and turbulence caused by buildings at the centre of Tokyo. The interruption effect is increased in accordance with the height of these buildings. On the other hand, adverse pressure gradients interrupt in the internal region.