• Journal of the Korean Society of Industry Convergence
• /
• v.1 no.2
• /
• pp.41-48
• /
• 1998

This experimental study describes atomization characteristics of spray-spray impingement. Effect of the impingement location and angle on the penetration and the sauter mean diameter of the impinged spray were investigated. Experiment were performed under ranging from 50kPa to 250kPa spray pressure, ranging $30^{\circ}C$ to $135^{\circ}C$ angle on the penetration and free spray. In the case of this experimental, sauter mean diameter $D_{32}$ tends to decrease and duration of film disintegration $t_f$ to decrease, when spray pressure and angle on the penetration is increased. Sauter mean diameter $D_{32}$ were about 20% to be smaller compared with a free spray to jet-jet impingement and 30% to be smaller compared with a free spray to spray-spray impingement.

• 한국연소학회:학술대회논문집
• /
• 2000.12a
• /
• pp.194-201
• /
• 2000

This paper is intended to analyze the macroscopic behavior and transient atomization characteristics of the high-pressure gasoline injector in direct-injection gasoline engine. The global spray behavior of fuel injector was visualized by shadowgraph technique. Time-resolved droplet axial and radial velocity components and droplet diameter were measured at many probe positions in both axial and radial directions by a two-component phase Doppler particle analyzer (PDPA). In order to obtain the influence of fuel injection pressure, the macroscopic visualization and experiment of particle measurement on the fuel spray were investigated at 3,5 and 7 MPa of injection pressure under different surrounding pressure in the spray chamber. The results of this work show that the fuel injection pressure of gasoline injector in GDI engine has influence upon the mean droplet diameter, mean velocity of spray droplet, the spray tip penetration, and spray width under the elevated ambient pressure.

• Journal of Forest and Environmental Science
• /
• v.30 no.3
• /
• pp.259-266
• /
• 2014

Stand Density Diagrams (SDD) are average stand-level models which graphically illustrate the relationship between yield, density and mortality throughout the various stages of forest development. These are useful tools for designing, displaying and evaluating alternative density regimes in even-aged forest ecosystems to achieve a desired future condition. This contribution presents an example of a SDD that has been constructed for teak forests of Karnataka in southern India. The relationship between stand density, dominant height, quadratic mean diameter, relative spacing and stand volume is represented in one graph. The relative spacing index was used to characterize the population density. Two equations were fitted simultaneously to the data collected from 27 sample plots measured annually for three years: one relates quadratic mean diameter with stand density and dominant height while the other relates total stand volume with quadratic mean diameter, stand density and dominant height.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.538-546
• /
• 1989

Effect of liquid viscosity was studied experimentally on the drop size distributions of the liquid sprays from swirl atomizers. Glycerine-Water mixtures were used as test fluids for the experiments. Drop sizes of the liquid sprays were measured with the light scattering method. The concept of the standard deviation was introduced to represent the degree of uniformity of the drop size distributions. Experimental results show that the spray drops become coarser and less uniform with the liquid of higher viscosity. The effect of viscosity on the Sauter mean diameter and the standard deviation appeared to be more significant with the lower injection pressure. It was also confirmed that the Sauter mean diameter increases with the increase of the liquid viscosity and with the decrease of the injection pressure.

• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.120-126
• /
• 1993

This work was carried out to investigate the effects of solid mass flow rate, mean particle diameter and mesh number of screen packing material on minimum carrying velocity, which defined as the superficial gas velocity of the upper limit of chocking phenomenon. Vertical pneumatic conveying was studied on a 4.6cm 1. D. pipe, 180cm in length. Experiments were performed in both the empty and the screen-packed pipe. It was also examined the effect of superficial gas velocity, solid mass flow, mean particle diameter, and mesh number of packing material on pressure drop. Minimum carrying velocity in screen packed-pipe was lower than that in an empty pipe. besides minimum carrying velocity was decreased with increase in mesh number of screen packing material. The pressure drop In vortical packed-pipe was Increased with superficial gas velocity, mean particle diameter, and mesh number of screen packing material.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.3
• /
• pp.145-151
• /
• 2006

The purpose of this study was to analyze the relationship between the annual variation in diameter growth of Quercus spp. and climatic factors such as monthly temperature, precipitation and solar radiation in central and northern Korea. Annual diameter growth was measured by using stem cores of 262 Quercus trees, and the correlation between the diameter growth and the climatic factors was analyzed. Mean diameter growth of Quercus spp. in Jungwangsan was larger than that in Woraksan, and mean diameter growth by the species was large in order of Q. serrata>Q. variablis>Q. mongolica>Q. dentata. The diameter growth pattern of Quercus spp. in Woraksan was different from that in Jungwangsan. Positive correlations between diameter growth of Quercus trees and temperature or the solar radiation during July were found in Jungwangsan. Significant correlations between diameter growth and solar radiation during March and precipitation during June were found in Woraksan. It is suggested that climatic factors similarly affect the diameter growth of Quercus spp. in a mountainous terrain, but influences of the climatic factors depend on other environmental conditions such as altitude, topography and soil depth.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.4
• /
• pp.43-52
• /
• 1994

I investigated experomentally the spray characteristics to the operating conditions and the shapes of internal mixing twin fluid atomizer. The wide variations of air per liquid ratio are conducted to predit the influences of the Sauter mean diameter(SMD), spray angle, distribution of drop size, the flowing condition of gas and length, flowing, area of gas and liquid, and diameter, number and place of the orifice. In this experiment, air per liquid raio, mixing chamber length per diameter, orifice diameter, and the flowing area ratio of gas and fluid influences greatly on SMD, spray angle, distribution of drop size and intermittent fluctuation region.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.13-18
• /
• 1992

Three cattle, a sheep and a goat were slaughtered to determine the distribution of digesta particles and mean size of digesta particles. Aliquot samples of digesta in the diverse sites of the digestive tracts were fractionated by a wet sieving technique. Fractionated particles were analyzed by the magnetic grid analyzer system constructed by authors. Results showed that the proportion of particles in digesta was similar among the omasum, abomasums cecum, colon and rectum, but that for the reticulo-ruminal digesta was different from the others. The pattern of the mass base frequency distribution of particles was also similar in the post-ruminal digesta. Average Heywood's diameter (the diameter equivalent to that of a circle with equal area to a projected area of a given particle) was about 1.2 mm in the reticulo-ruminal digesta and decreased to 0.65 mm for cattle or to about 0.35 mm for sheep and goat in the omasal digesta. Average Heywood's diameter was about the same in the post-ruminal digesta. It is concluded that mean particle size and particle distribution in digesta of the rectum or feces reflect those in digesta of the omasum.

• Archives of Plastic Surgery
• /
• v.36 no.6
• /
• pp.779-783
• /
• 2009

Purpose: Male hypertrophic nipples can lead to psychological distress and physical discomfort. The authors present a new technique of male nipple reduction and describe its advantages Methods: The neonipple is designed to reduce diameter and height of nipple while preserving the subdermal plexus. After the central wedge excision, additional four triangular section of nipple skin is excised. One of the remaining two flaps is amputated partially and both flaps were approximated using 4 - 0 PDS and 6 - 0 Nylon sutures. Results: Between December of 2007 and January of 2009, 52 nipple reductions were performed in 30 male patients(mean = 29.5 years). Postoperative recovery was rapid and few complications were encountered. The mean diameter of the hypertrophic nipple was $9.1{\pm}2.5mm$(range, 7 to 15 mm). The mean diameter of the neonipple was $5.0{\pm}0.7mm$(range, 4 to 6 mm), with an average reduction of $3.8{\pm}0.6mm$(range, 2 to 11 mm). At follow-up, the neonipple had a natural appearance, with less projection and an inconspicuous scar. Conclusion: The wedge and triangular skin excision and partial amputation are easy to perform and yields consistent results. This technique decreases both the diameter and height of any size nipple and can be modified to meet patient preferences.

• Journal of Korean Society of Forest Science
• /
• v.61 no.1
• /
• pp.1-7
• /
• 1983

In the estimation of diameter distribution in a stand using Weibull distribution function, the calculation method of experimental distribution was presented in previous paper. This study was to estimate the diameter distribution of Korean pine stands by Weibull distribution which represents Gamma function, with mean diameter and mean basal-area diameter of the random sample trees. The results obtained fitted the diameter distribution in experimental stands. Thus, this method appears to be used for the estimation of diameter distribution in a stand as well as for the analysis and prediction of stand construction for the future.