Journal of the Korean Society of Industry Convergence (한국산업융합학회 논문집)

The Korean Society of Industry Convergence (한국산업융합학회)
권호 표지

Atomization Characteristics by Impigement of Spray

분무 상호 충돌에 의한 미립화 특성

  • Kim, Chun-Jung (Dept. of Mechanics Eng., Yeungnam Collge of Science & Technology) ;
  • SAITO, Masahiro (Dept. Mech., Sys., Eng., Faculty of Engineering Gunma University) ;
  • ARAI, Masataka (Dept. Mech., Sys., Eng., Faculty of Engineering Gunma University)
  • Received : 1998.06.15
  • Accepted : 1998.09.15
  • Published : 1998.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

This experimental study describes atomization characteristics of spray-spray impingement. Effect of the impingement location and angle on the penetration and the sauter mean diameter of the impinged spray were investigated. Experiment were performed under ranging from 50kPa to 250kPa spray pressure, ranging $30^{\circ}C$ to $135^{\circ}C$ angle on the penetration and free spray. In the case of this experimental, sauter mean diameter $D_{32}$ tends to decrease and duration of film disintegration $t_f$ to decrease, when spray pressure and angle on the penetration is increased. Sauter mean diameter $D_{32}$ were about 20% to be smaller compared with a free spray to jet-jet impingement and 30% to be smaller compared with a free spray to spray-spray impingement.

Keywords