• Korean Journal of Food Science and Technology
• /
• v.41 no.3
• /
• pp.278-283
• /
• 2009

This study was carried out to evaluate the quality characteristics of white pan breads containing 0.5% of gums, including HPMC, MC and SA. Moisture content, water activity, cooling loss, bread volume, rheological, and sensory evaluations were performed to examine the bread quality characteristics. Moisture content and water activity were highest in the bread with added HPMC. HPMC showed the smallest cooling loss among the breads compared to the other added gums. The bread with added SA had the thelargest volume at $2,560{\pm}24$ mL. In terms of rheological properties, the hardness of the bread containing HPMC was lowest and the springness of the bread with added SA was the highest. In sensory evaluations, the bread containing HPMC was evaluated as the most preferred product by acquiring the highest scores in internal and external evaluations. Consequently, the bread containing 0.5% SA showed better volume and springiness values. However, the bread containing 0.5% HPMC showed greater moisture content, greater water activity, lower cooling loss, and better sensory evaluation scores. Based on the overall results, HPMC was considered to be the most effective hydrocolloid to increase bread quality.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.41.1-41.1
• /
• 2009

Aerosol Deposition (AD) is anovel way to fabricate bioactive ceramic coatings in biomedical implants and prostheses applications. In the present work, silicon-substituted hydroxyapatite (HA) coatings on commercially pure titanium were prepared by aerosol deposition using Si-HA powders. The incorporation of silicon in the HA lattice is known to improve the bioactivity of the HA, makingsilicon-substitute HA an attractive alternative to pure HA in biomedical applications. Si-HA powders with the chemical formula $Ca_{10}(PO_4)_6-x(SiO_4)x(OH)_2-x$, having silicon contents up to x=0.5 (1.4 wt%), were synthesized by solid-state reaction of $Ca_2P_2O_7$, $CaCO_3$, and $SiO_2$. The Si-HA powders were characterized by X-ray diffraction (XRD), X-ray fluorescence spectrometry (XRF), and Fourier transform infrared spectroscopy(FT-IR). The corresponding coatings were also analyzed by XRD, scanning electron microscopy (SEM), and electron probe microanalyzer (EPMA). The results revealed that a single-phase Si-HA was obtained without any secondary phases such as $\alpha$- or $\beta$-tricalcium phosphate (TCP) for both the powders and the coatings.The Si-HA coating was about $5\;{\mu}m$ thick, had a densemicrostructure with no cracks or pores. In addition, the proliferation and alkaline phosphatase (ALP) activity of MC3T3-E1 preosteoblast cells grown on the Si-HA coatings were significantly higher than those on the bare Ti and pure HA coating. These results revealed the stimulatory effects induced by siliconsubstitution on the cellular response to the HA coating.

• Korean Journal of Materials Research
• /
• v.7 no.11
• /
• pp.999-1006
• /
• 1997

0.14wt.%C-0.82wt.%Mn-0.20wt, %Si-0.10wt.%V-0.03wt.%Nb의 조성을 갖는 직접 소입강에 몰리브데늄을 각각 0.30wt.%, 0.58wt.% 첨가하여 기계적 성질을 조사하고 투과 전자 현미경을 이용하여 각각의 미세 조직을 관찰하여 석출물을 분석하였다. 직접 소입시의 석출물은 M$_{2}$C, MC의 비평형 상태의 석출물이 생성되었고 석출물들은 마르텐사이트 래스내의 침상형탄화물, 구형의 M$_{2}$C탄화물, 직사각형 형태의 MC탄화물이 관찰되었다. 유냉시에는 래스내의 침상형 탄화물만 관찰되었으며 수냉시에는 M$_{2}$C 탄화물이 관찰되었다. 0.58wt.%의 몰리브데늄의 첨가된 강에서는 MoN이 관찰되었으며, 이 강의경우 강도의 손실 없이 인성이 증가하는 경향을 나타내었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1756-1760
• /
• 2006

LTPS technology based on SLS Crystallization was intensively reviewed. LTPS structure produced by SLS crystallization is composed of much larger grains compared with conventional ELA crystallization structure, which can give higher TFT performances. However, TFT performance uniformity and anisotropy problem should be solved for it to be used in mass production. TFT performance uniformity was from main grain boundary position and could be solved by equal defect area structure $(EDAS^{TM})$. TFT performance anisotropy could be also solved by multi-channel (MC) structure that can make parallel component in perpendicular channel direction. The higher TFT performances from SLS technology can make superior optical and/or electrical properties and has been adopted in mass production successfully.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.361.1-361.1
• /
• 2016

Due to their high sensitivity, fast response, small energy consumption and ease of integration, nanoelectromechanical systems (NEMS) have attracted much interest in various applications such as high speed memory devices, energy harvesting devices, frequency tunable RF receivers, and ultra sensitive mass sensors. Since the device performance of NEMS is closely related with the mechanical and flexural properties of the material in NEMS, analysis of the mechanical and flexural properties such as intrinsic tensile stress and Young's modulus is a crucial factor for designing the NEMS structures. In the present work, the intrinsic mechanical properties of highly stressed silicon nitride (SiN) beams are investigated as a function of the beam length using two different techniques: (i) dynamic flexural measurement using optical interferometry and (ii) quasi-static flexural measurement using atomic force microscopy. The reliability of the results is analysed by comparing the results from the two different measurement techniques. In addition, the mass density, Young's modulus and internal stress of the SiN beams are estimated by combining the techniques, and the prospect of SiN based NEMS for application in high sensitive mass sensors is discussed.

• Resources Recycling
• /
• v.16 no.1 s.75
• /
• pp.59-67
• /
• 2007

Recovery of acids from the waste etching solution of containing acetic, nitric and hydrofluoric acid discharged from silicon wafer manufacturing process has been attempted by using solvent extraction method. EHA(2-Ethylhexlalcohol) for acetic acid and TBP(Tri-butly Phosphate) for nitric and hydrofluoric acid as a extraction agent was used to the experiment to obtain the process design data in separation procedure. From the experimental data and McCabe-Thiele diagram analysis, we obtained the optimum conditions of phase ratio(O/A) and stages to separate each acid sequently from the mixed acids. The recovery yield was obtained above 90% for acetic acid from the acid mixtures, 90% for nitric acid from acetic acid extraction raffinate and then above 67% for hydrofluoric acid from final extraction raffinate.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.7
• /
• pp.412-417
• /
• 2015

This study investigated to recycle geobond and ash produced in thesewage sludge incinerator using reduction/stabilization. Nonsintering process was performed by binding cement (High Early Strength Portland cement, Micro cement), geobond and sand mixed with sewage sludge ash (SSA). Chemical ingradients of the sewage sludge ash was mainly composed of $SiO_2$, $Al_2O_3$, $Fe_2O_3$, CaO and others, which were similar to those of the each binders consisting High Early Strength Portland cement, Micro cement and geobond. Results showed that unconfined the long term compressive strength could be obtained components of sewage sludge ash. It exceeded more than double score 64.6 MPa of the Korean standard ($22.54MPa=229.7kg/cm^2$). Microstructure of solidified block for the different admixture was related to the compressive strength according to SEM analysis. Optimum mixing range of the sewage sludge ash to each binders were found to be 10~40% which can widly safely regulate the confined a long term compressive strength. The best binder of long term compressive strengh was revealed Geobond more than High Early Strength Portland cement and Micro cement. This study revealed the sewage sludge ash can be partial replacement of the inorganic binder & application block for recycling.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.20-20
• /
• 1998

I Ion beam technology has recently attracted much interest because it has exciting t technological p아:ential for surface analysis, ion beam mixing, surface cleaning and etching i in thin film growth and semiconductor fabrication processes, etc. Es야~cially, ion beam s sputtering has been widely used for sputter depth profiling with x-photoelectron S spectroscopy (XPS) , Auger electron s$\pi$~troscopy(AES), and secondary-ion mass S야i따oscopy(SIMS). However, The problem of surface compositional ch없1ge due to ion b bombardment remains to be understo여 없ld solved. So far sputtering processes have been s studied by s따face an외ysis tools such as XPS, AES, and SIMS which use the sputtering p process again. It would be improbable to measure the modified surface composition profiles a accurately due to ion beam bombardment with surface analysis techniques based on sputter d depth profiling. However, recently Medium energy ion scattering spectroscopy(MEIS) has b been applied to study the sputtering of solid surface at ion bombardment and has been p proved that it has been extremely valuable in probing the surface composition 뻐d s structure nondestructively and quantita디vely with less than 1.0 nm depth resolution. To u understand the sputtering processes of solid surface at ion bombardment, The Molecular D Dynamics(MD) and Monte Carlo(MC) simulation has been used and give an intimate i insight into the sputtering processes of solid surfaces. In this presentation, the sputtering processes of alloys and compound samples at ion b bombardment will be reviewed and the MEIS results for the Ar+ sputter induced altered l layer of the TazOs thin film 뻐dd없nage profiling of Ar+ ion sputt얹"ed Si(100) surface will b be discussed with the results of MD and MC simulation.tion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.617-620
• /
• 1999

In this study, the polarization e(fecal and the birefringence effect of amorphous germanium (a-Ge) thin films were investigated by using linearly polarized He-Ne laser beam. The a-7e thin films were deposited on the quarts substrate by plasma enhanced chemical vapor deposition (PECVD) and thermal vacuum evaporation In order to obtain the optimum grating arrays, inorganci resists such as Si$_3$N$_4$ and a-Se$_{75}$ Ge$_{25}$ , were prepared with the optimized thickness by Monte Carlo (MC) simulation. As the results of MC simulation, the thickness ofa-Se$_{75}$ Ge$_{25}$ resist was determined with Z$_{min}$ of 360$\AA$ . The resists were exposed to Ga$^{+}$-FIB with accelerating energies of 50 keV, developed by wet etching, and a-Ge thin film was etched by reactive ion-etching (RIE). Finally, we were obtained grating arrays which grating width and linewidth are 0.8${\mu}{\textrm}{m}$, respectively and we studied the polarization and birefringence effect in transmission grating array made of high refractive amorphous material, and the applicability as waveplates and polarizers in optical device.e.e.

• Korean Journal of Metals and Materials
• /
• v.48 no.7
• /
• pp.589-597
• /
• 2010

In the present study, the effect of variation in alloying elements on the carbide formation behavior during casting and homogenization treatment of M2 high speed steels was investigated. M2 high speed steels of various compositions were produced by vacuum induction melting. Contents of C, Cr, W, Mo, and V were varied from the basic composition of 0.8C, 0.3Si, 0.2Mn, 4.0Cr, 6.0W, 5.0Mo, and 2.0V in weight percent. Homogenization treatment at $1150^{\circ}C$ for 1.5 hr followed by furnace cooling was performed on the ingots. Area fraction and chemical compositions of eutectic carbide in as-cast and homogenized ingots were analyzed. Area fraction of eutectic carbide appeared to be higher in the ingots with higher contents of alloying elements the area fraction of eutectic carbide also appeared to be higher on the surface regions than in the center regions of ingots. As a result of the homogenization treatment, $M_2C$ carbide, which was the primary eutectic carbide in the as-cast ingots, decomposed into thermodynamically stable carbides, MC and $M_6C$. The latter carbide was found to be the main one after homogenization. Fine carbides uniformly distributed in the matrix was found to be MC type carbide and coarsened by homogenization.