• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.102-103
• /
• 2001

In this paper we calculate the AC Loss in the superconducting slab carrying ac transport current. Magnetic diffusion equation for computation of the electric field and current distribution are based on Maxwell's equations and non-linear constitutive equation. The E-J characteristics of superconductor are applied to computation. We will present the result of the high-temperature superconductor case comparison with the slab of low temperature superconductor.

• 대한전기학회논문지
• /
• 제39권5호
• /
• pp.445-452
• /
• 1990

In order to design a conveyer system which is driven by short primary single sided linear induction motors (SLIM), the thrust force characteristics of SLIM have been calculated from the fundamental equation based on Maxwell's electromagnetic equation and by varying the various design parameters. A conveyer system of moving secondary has been constructed using the design values obtained by the simulation and these values are compared with the experimental values. The control method of the conveyer system is also proposed.

• 대한전자공학회논문지SD
• /
• 제41권4호
• /
• pp.101-112
• /
• 2004

본 논문에서는 3차원 인터커넥트(3D interconnect) 구조를 해석하기 위하여 ADI-유한차분시간영역(ADI-FDTD: Alternating Direction Implicit Finite Difference Time Domain)법으로 맥스웰 회전 방정식(Maxwell's curl equation)을 계산하는 수치 해석 모델을 개발하였고, 개발한 ADI-유한차분시간영역법을 이용하여 3.3 V CMOS 기술로 설계된 샘플러 회로의 일부의 영역에 대해 컴퓨터 모의 실험 결과하여 입력된 구형 전압 신호가 금속 배선을 거치면서 5∼10 ps의 신호 지연과 0.1∼0.2 V의 신호 왜곡이 발생되는 것을 확인하였다. 결론적으로 ADI-유한차분시간영역법을 이용한 풀-웨이브 해석을 통하여 고속의 VLSI 인터커넥트에서의 전자기 현상을 정확하게 분석할 수 있음을 제시하였다.

• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.396-403
• /
• 1991

A solution is presented for the computation of the elastic-creep stresses in a hollow cylinder subjected to nonaxisymmetric temperature distribution. The creep problem is treated by the Maxwell creep model. Laplace transformation is used for reformation of the governing equation of elastic problem and Hooke's law in a function of .gamma. , .theta. , and creep constant. The governing equation is set up using the Airy stress function which leads to the biharmonic equation. The solution is obtained by using Fourer series method and Laplace inverse method used to obtain the stress components which include the variation of time. This solution shows excellent agreement with Lamkin's and Boley & Weiner's solution. The viscoelastic stresses are also obtained for the fuel rob tube subjecting nonaxisymmetric thermal load.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.46-48
• /
• 1994

In this paper, for optimum design and good efficiency, the characteristics of a induction motor is analyzed by using electromagnetic field theory, Maxwell'equation with consideration of slot-teeth shape, materials, etc.

• 전기의세계
• /
• 제19권3호
• /
• pp.1-9
• /
• 1970

In this paper, the equation for the generated force is introduced, on the basis of Maxwell's electromagnetic equation, by dividing the air-gap magnetic field into the region of the constant amplitude and the region of the pulsating field in the both ends of iron core, in the case that the typical 3 phase winding is employed in the double sided 3 phase linear induction motor with sheet rotor in accrodance with the winding method of rotary induction machine. With the effect of the overhang region being taken into account, the result, in which the equation is established, inducates that theoretical values nearly coincides with the measured values in the interval of slip s=0-0.8.

• 센서학회지
• /
• 제6권2호
• /
• pp.87-94
• /
• 1997

이 논문에서는 비자성 연선도체의 단면적을 검출하는 솔레노이드 센서의 임피던스 해석이 다루워졌다. 도전체의 전기 자기적 특성들을 검출하기 위하여, 관통형 코일로 비파괴검사 와전류 센서를 선택하였다. Maxwell 방정식을 풀어서 도체봉을 가진 센서의 규격화 임피던스 응답이 모델링되고 그 결과들이 연선에 확장되었다. 연선구조에 미치는 기하학적 성질이 검토되고 수치 해석과 실험결과 또한 주어진다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.32-34
• /
• 1997

For a given brushless DC linear motor, we suggest the numerical prediction methods to analyze it's thrust characteristics. First, we calculate the magnetic flux density by the finite element method, and we then compute the maximum thrust with three computational methods - a Lorentz equation, a Maxwell stress method and a virtual work method. To confirm the accuracy of the computational methods, we measure the thrust of the linear motor made by our laboratory with a force-torque sensor. Also, we calculate the thrust by the measured back electromotive force. To choose the appropriate method for a specified application, we compare the maximum thrusts of the computational method and the calculation by the back electromotive force with the measured one. We conclude that the Maxwell stress method is turned out the best because it has the most accurate results among three computational methods and it is more convenient than the calculation method by the back electromotive force.

• 대한가정학회지
• /
• 제26권3호
• /
• pp.93-102
• /
• 1988

Rheological properties of cowpea and mung bean starch gels and pastes were investigated and compared with Instron Universal Testing machine and Brabender Viscometer. As the result of puncture test of gels, yield point force of mung bean starch gel was higher than that of cowpea starch gel. Compression coefficient of cowpea starch gel calculated by Bourne's equation was lower than that of mung bean starch gel. the stress relaxation test showed that viscoelastic properties of cowpea and mung bean starch gels may be represented by six element Maxwell model consisting of three Maxwell element in parallel. Cowpea and mung bean starch pastes showed bingham pseudoplastic behavior in 3, 5, 6, 7 and 8%. The consistency index in 7∼8% of cowpea starch paste were lower than those of mung bean starch paste. concentration dependence on consistency index and yield stress in mung bean starch were higher than those of cowpea starch. The yield stress of starch pastes was significantly correlated with yield point force by puncture test (r=0.996).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.131.2-131.2
• /
• 2015

마이크로웨이브를 이용한 플라즈마는 효율적인 전자가열이 가능하며, 낮은 이온에너지를 가지는 고밀도 플라즈마를 생성시킬 수 있다는 장점이 있다. 최근 산화물 반도체 및 대화면 디스플레이 장치내 소자의 보호막 증착용으로 저온 PECVD (Plasma Enhanced Chemical Vapor Deposition) 공정 및 장치의 필요성에 따라 마이크로웨이브를 이용한 PECVD 장치가 주목 받고 있다. 본 연구에서는 실리콘 나이트라이드 공정 장치 개발을 위한 2차원 시뮬레이션 모델을 완성하였다. Global modeling을 이용하여 확보한 Chemical reaction data에 대한 검증을 하였다. Maxwell's equation, continuity equation, electromagnetic wave equation 등을 이용하여 Microwave의 파워 및 압력에 따른 전자 밀도, 전자 온도등의 플라즈마 변수의 변화를 관찰하였다. 또한 Navier Stokes equation을 추가하여 챔버 내의 Gas flow의 흐름을 고려한 시뮬레이션을 진행하여 분석하였다.