• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.251-256
• /
• 2012

In this paper, we addressed the problem of upstream bandwidth in EPONs. We presented a wavelength division EPON supporting QoS in the differentiated services framework. It was shown that the bandwidth allocation by priority scheduling, under our assumptions for traffic behavior, will result in an unexpected behavior for high priority class and we suggested the use of weighted priority scheduling to alleviate this problem. Our wavelength division EPON supporting QoS allocates effectively and fairly bandwidths and wavelengths between ONUs in the differentiated services framework. Moreover, we showed better performance in terms of average and maximum end-to-end delay, as well as network throughput, utilization compared with some other algorithms. We used simulation experiments to study the performance and validate the effectiveness of the proposed network and algorithm.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.199-203
• /
• 2019

The characteristics of a photonic crystal fiber sensor with reuleaux triangle are studied by using the finite element method. The wavelength sensitivity of the designed optical fiber sensor is related to the arc radius of the reuleaux triangle. Whether the core area is solid or liquid as well as the refractive index of the liquid core contributes to wavelength sensitivity. The simulation results show that larger arc radius leads to higher sensitivity. The sensitivity can be improved by introducing a liquid core, and higher wavelength sensitivity can be achieved with a lower refractive index liquid core. In addition, the specific channel plated with gold film is polished and then analyte is deposited on the film surface, in which case the position of the resonance peak is the same as that of the complete photonic crystal fiber with three analyte channels being filled with analyte. This means that filling process becomes convenient with equivalent performance of designed sensor. The maximum wavelength sensitivity of the sensor is 10200 nm/RIU and the resolution is $9.8{\times}10^{-6}RIU$.

• Journal of the Korean Ceramic Society
• /
• v.24 no.3
• /
• pp.215-222
• /
• 1987

${\alpha}$-Ferric Hydrous Oxide and ${\alpha}$-Ferric Oxide were obtained as following processes that Ferric Nitrate solution was adjusted to pH 6-8 with Ammonium Hydroxide, refluxed the Iron precipitate for 1 hr. at 80$^{\circ}C$, washed it with water and Methanol (95%), dried it to obtain ${\alpha}$-Ferric Hydrous Oxide at 60$^{\circ}C$, and then heated in atmosphere to prepare ${\alpha}$-Ferric Oxide for 1 hr. at 450$^{\circ}C$. Mica particles cleaned with ultrasonicator (45KHz) in water were mixed with Ferric Nitrate solution and treated it to adsorb ${\alpha}$-Ferric Oxide on the surface of mica particles by using the abovementioned processes, but the heated temperature was at 500$^{\circ}C$. The maximum wavelength of reflected light on the surface of mica-${\alpha}$-Ferric Oxide (50%) was appeared at 546nm but -Ferric Oxide free mica only was at 436 nm. The maximum wavelength was shifted to longer when the weight ratios of ${\alpha}$-Ferric Oxide to mica was changed from 1% to 50%.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.1E
• /
• pp.14-19
• /
• 2006

Ultrasonic absorption and velocity spectra in bovine serum albumin (BSA) aqueous solutions have been measured at $20^{\circ}C$ over the frequency range 0.2-3 MHz in the pH range 1.5-13.2. The high-Q ultrasonic resonator and pulse-echo overlap methods were used. At acid pH's, excess absorption over that of pH 7 was explained by double relaxation. The pH dependences of the relaxation frequency and maximum absorption per wavelength, showed that the relaxation at about 200 kHz was related to the expansion of molecules and that about 3 MHz resulted from the proton transfer reaction of carboxyl group. At alkaline pH's, the excess absorption was explained by double relaxation. The relaxation at about 300 kHz was associated with a helix-coil transition, and that about 3 MHz was attributed to the proton transfer reaction of phenolic group. The rate constants and volume changes associated with these processes were estimated.

• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.60-67
• /
• 1995

This study was made to investigate the effect of silk fabrics treated with mimosa and tannic acid-weighting effect, surface color according to temprature, treatment time, concentration, pH. The results were as follows ; 1. The wavelength of maximum absorption of mimosa and tannic acid solution appeared at 278.5nm and 275.0nm, respectively. By the irradiation, spectra at wavelength of maximum absorption of mimosa solution disappeared, but those of tannic acid solution decreased after 48hr irradiation. 2. The tannin weighting increased with the increase of concentration, treatment temperature at 8$0^{\circ}C$, acidic condition. In case of tannic acid, it was higher than mimosa. 3. Surface color of silk fabric with mimosa changed from 2.8YR to 5.8YR acc-ording to the increase o( tannin concentration but in case of tannic acid itchanged from 4.2Y to 3.9Y. It was more changed acidic or alkaline conditionthan origine solution.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1725-1729
• /
• 2013

In this paper, the modeling and simulation of infrared absorption in an infrared absorbing structure with the cascaded transmission line model were carried out. Each layer in the infrared absorbing structure can be modeled as a characteristic impedance of the cascaded transmission line model. The simulation results show that the cavity thickness to get a maximum absorption should be less than a quarter wavelength, which is somewhat different from prevalent thickness. It can be assured that the sheet resistance of an absorbing layer to get a maximum absorption is $377{\Omega}/{\square}$, that the thickness of the absorbing layer dose not affect the spectral characteristics of absorption. It is also shown that the thickness of the active layer is not critical to the IR absorption. It can also be assured that the validation of this modeling is proved in comparison with the previous results from similar absorbing structures.

• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.271-277
• /
• 2004

The aim of this study was to investigate questioned documents written with blue or black ballpoint pen on paper by nondestructive technique. In this work, 21 blue and 22 black ballpoint pen inks which were purchased on different brands were analyzed by using Microspectrophotometry (MSP). The reflectance spectra were obtained from these ink samples and their shapes and the wavelength of the maximum intensity were compared. In the blue and black ballpoint pen inks, the discriminating powers (DP) were 0.85 and 0.61, respectively. The changes of the reflectance intensity at their wavelength of maximum intensity and their shapes appeared according to the exposure time to sunshine in a laboratory, especially in the blue ballpoint pen inks. Therefore it is possible to distinguish ink entries on the same paper with the relative age in case of questioned letters written with blue ballpoint pen.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1418-1421
• /
• 2009

A series of new light-emitting random copolymers with fully conjugated structure was prepared, for the first time through the well-known Gilch polymerization between 1,4-bis(chloromethyl)-2-ethylhexyloxy-5-methoxybenzene and 2,5-bis(bromomethyl)thiophene monomers in different ratios. The synthesized polymers (on thin film) showed the maximum wavelength of UV-visible absorbance and photoluminescence (PL) near 500 nm and near 600 nm, respectively. A single-layer light-emitting diode device, which has a simple ITO (indium-tin oxide)/polymer/Al configuration, was fabricated by spin-coating of polymers and then vacuum evaporation of Al metal. The threshold bias of PMEHPVTVs was in the range of 3.5-10 V. As in the PL spectra, the maximum wavelength of light emission near 600 nm was also shown in electroluminescence (EL) spectra of PMEHPVTVs when the operating voltage was about 7 - 14 V.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.677-682
• /
• 2004

In the present paper routing and wavelength assignment (RWA) in optical WDM networks is considered. Previous techniques based on the combination of integer linear programming and graph coloring are complex and require extensive use of heuristics. Such methods are mostly slow and sometimes impossible to get results due to infeasibility. An alternative approach applied to RWA employs on the greedy algorithm for obtaining the maximum edge disjoint paths. Even though this approach is fast, it produces a solution for any connection request, which is very far from the optimal utilization of wavelengths. We propose a novel algorithm, which is based on the maximum flow technique to obtain the maximum quantity of edge, disjoint paths. Here we compare the offered method with previous maximum edge disjoint paths algorithms ap plied to the RWA.

• 전자공학회논문지 IE
• /
• v.45 no.1
• /
• pp.1-6
• /
• 2008

In this paper, the white organic LED with two-wavelength was fabricated using the NPB of blue emitting material and a series of orange color fluorescent dye(Rubrene) by vacuum evaporation processes. The structure of white OLED was ITO/NPB$(200{\AA})$NPB:Rubrene$(300{\AA})$/BCP$(100{\AA})/Alq_3(100{\AA})/Al(1000{\AA})$ and the doping concentration of Rubrene was 0.75 wt%. We obtained the white OLED with CIE color coordinates were x=0.3327 and y=0.3387, and the maximum EL wavelength of the fabricated white organic light-emitting device was 560 nm at applied voltage of 11 V, which was similar to NTSC white color with CIE color coordinates of x=0.3333 and y=0.3333. The turn-on voltage is 1 V, the light-emitting him-on voltage is 4 V. We were able to obtain an excellent maximum external quantum efficiency of 0.457 % at an applied voltage of 18.5 V and current density of $369mA/cm^2$.