• 한국해안·해양공학회논문집
• /
• 제28권2호
• /
• pp.109-115
• /
• 2016

우리나라 동해안 6개 관측점에서 장기간 관측된 파랑자료를 이용하여 폭풍파의 출현 추세를 검토하였다. 한국해양과학기술원의 4개 정점(속초, 묵호, 후포, 진하)에서는 관측기간 동안 유의파고의 연별 평균값과 최대값의 주목할 만한 추세가 나타나지 않았다. 또한, 폭풍파의 연별 출현 횟수는 진하에서만 완만한 증가 추세가 나타났고 나머지 세 정점에서는 감소 추세를 보였다. 그러나 기상청 동해부이의 경우 유의파고의 연별 평균값과 최대값 및 폭풍파 연별 출현횟수가 2009년 이후로 매우 급격하게 증가하는 경향이 나타났으며 해당 자료의 연속성이 확보되지 않은 것으로 확인되었다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.229-232
• /
• 2008

The Central East Sea Tsunami caused huge damage to the eastern coast of the Korean Peninsula, eapecially Imwon port was damaged relatively strongly beacause of water depth variation which makes the wave concentration on this port. there are many virtual tsunami in east sea which has a possibility of happening. So, it is very important to expect the region which may be damaged by vritual tsunmis. In this study, modified dispersion-correction terms are used. The modified scheme has the advantage of using the constant spatial grid size and time step size even in real topography. Dynamic linking technique and staggered grid system are used. Using this model some cases of virtual tsunami was simulated and check the region which is occured maximum wave heights on the eastern sea of the Korean peninsula.

• 한국해양공학회지
• /
• 제37권3호
• /
• pp.89-98
• /
• 2023

Analyzing the interactions of free surface waves caused by a submerged-body movement is important as a fundamental study of submerged-body motion. In this study, a two-dimensional mini-towing tank was used to tow an underwater body for analyzing the generation and propagation characteristics of free surface waves. The magnitude of the maximum wave height generated by the underwater body motion increased with the body velocity at shallow submerged depths but did not increase further when the generated wave steepness corresponded to a breaking wave condition. Long-period waves were generated in the forward direction as the body moved initially, and then short-period waves were measured when the body moved at a constant velocity. In numerical simulations based on potential flow, the fluid pressure changes caused by the submerged-body motion were implemented, and the maximum wave height was accurately predicted; however, the complex physical phenomena caused by fluid viscosity and wave breaking in the downstream direction were difficult to implement. This research provides a fundamental understanding of the changes in the free surface caused by a moving underwater body.

• Steel and Composite Structures
• /
• 제36권2호
• /
• pp.119-141
• /
• 2020

In this paper, wavy square absorbers were experimentally and numerically investigated. Numerical simulations were performed with LS-Dyna software on 36 wavy absorbers and their crushing properties were extracted and compared with the simple one. The effect of different parameters, including wave height, wave depth, and wave type; either internal or external on the crushing characteristics were also investigated. To experimentally create corrugation to validate the numerical results, a set of steel mandrel and matrix along with press machines were used. Since the initial specimens were brittle, they were subjected to heat treatment and annealing to gain the required ductility for forming with mandrel and matrix. The annealing of aluminum shells resulted in a 76%increase in ultimate strain and a 60% and 56% decrease in yield and ultimate stresses, respectively. The results showed that with increasing half-wave height in wavy square absorbers, the maximum force was first reduced and then increased. It was also found that in the specimen with constant diameter and half-wave depth, an increment in the half-wave height led to an initial increase in efficiency, followed by a decline. According to the conducted investigations, the lowe maximum force can be observed in the specimen with zero half-wave depth as compared to those having a depth of 1 cm.

• 한국해안·해양공학회논문집
• /
• 제34권6호
• /
• pp.303-314
• /
• 2022

해양 물리 환경 인자의 지속시간 분석은 작업시간, 설계와 같은 해안공학적 관점에서 요구되는 분석으로 해역 이용에 필수로 선행되어야하는 기초 분석이다. 본 연구에서는 기상청 해양기상관측부이 중 우리나라 서남해안 4개 관측 지점(덕적도, 외연도, 거문도, 거제도)의 풍속 및 유의파고 자료의 지속시간 분석을 수행하였다. 기준풍속은 1~15 m/s, 기준유의파고는 0.25~3.0 m의 범위를 설정하고 관측자료가 이를 넘어서 지속되는 시간을 산정했다. 분석결과, 풍속과 유의파고의 지속시간은 기준값이 높아질수록 급격히 감소했으며, 최대 기준 조건에서 지속시간의 중간값은 풍속이 최대 5시간, 유의파고는 최대 8시간으로 계산되었다. 1% 미만의 확률로 발생하는 지속시간은 기준풍속이 15 m/s일 때 최대 52시간, 기준유의파고가 3m일 때 최대 56시간으로 나타났다. 향후 우리나라 전 해역을 대상으로 해양기상 자료의 지속시간 분석을 수행할 수 있으며, 다양한 공학적 활용이 기대된다.

• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.1-8
• /
• 1997

두개의 서로 다른 밀도를 가지는 유체의 경계면에서 발생하는 내부고립파의 특성에 대하여 검토하였다. 해밀톤원리를 이용하여 내부고립파 문제의 지배방정식을 얻었다 이 지배방정식을 이용하여 고립파의 파고와 전파속도의 관계식을 얻었으며 계산된 전파속도는 실험 결과와 잘 일치하는 것을 보였다. 내부고립파가 전파 가능한 속도 영역이 존재하며, 전파속도의 최소값과 최대값을 두 층의 수심비와 밀도비의 함수로 나타내었다. 파고가 주어진 경우 KdV방정식에 의해서 계산된 전파속도는 실제보다 큰 값을 주며, 전파속도를 가지고 파고를 계산한 경우에는 실제보다 작은 값을 준다.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.841-848
• /
• 2021

This study investigated the acceleration characteristics of rock slopes when earthquakes, which have not been studied much in Korea, occur. The rock slope was modeled with a similar raw of 1/20 in consideration of the height(10m), roughness, strength, and the joint dips(20°). After the completion of the model, a shaking table tests was conducted according to the magnitude of the acceleration and the type of seismic wave. The maximum acceleration was greater in the short-period seismic wave than in the long-period seismic wave, and the maximum acceleration was larger in the small acceleration. The rock slope was close to a rigid block and a structure more vulnerable to the long period wave than to the short period wave. In the event of an earthquake smaller than the domestic earthquake-resistant maximum design acceleration(0.154g), safety management of the rock slope was required.

• 한국해양공학회지
• /
• 제34권4호
• /
• pp.245-252
• /
• 2020

Wave run-up is an important phenomenon that should be considered in ocean structure design. In this study, the wave run-up of a surface-piercing circular cylinder was calculated in the time domain using the three-dimensional linear and fully nonlinear numerical wave tank (NWT) techniques. The NWT was based on the boundary element method and the mixed Eulerian and Lagrangian method. Stokes second-order waves were applied to evaluate the effect of the nonlinear waves on wave run-up, and an artificial damping zone was adopted to reduce the amount of reflected and re-reflected waves from the sidewall of the NWT. Parametric studies were conducted to determine the effect of wavelength, wave steepness, and the draft of the cylinder on the wave run-up of the cylinder. The maximum wave run-up value occurred at 0°, which was in front of the cylinder, and the minimum value occurred near the circumferential angle of 135°. As the diffraction parameter increased, the wave run-up increased up to 1.7 times the wave height. Furthermore, the wave run-up was 4% higher than the linear wave when the wave steepness was 1/35. In particular, the crest height of the wave run-up increased by 8%.

• 한국해양환경ㆍ에너지학회지
• /
• 제7권1호
• /
• pp.47-55
• /
• 2004

본 논문은 1998년부터 2002년까지 대한민국 홍도 해역에 설치된 파향파고계에서 계측된 파랑자료를 이용하여 홍도 해역 파랑의 통계적 특성을 살펴보았다. 파랑관측율과 평균파고, 평균주기, 파향을 하였다. 그리고 파고-주기결합분포표를 작성하였고, n년 반복주기 파고와 최대 파고의 주기를 추정하였다. 2000년과 2002년에 발생한 태풍 "프라피룬"과 "루사"에 의한 파랑의 특성을 파악하였다.

• Ocean Systems Engineering
• /
• 제12권1호
• /
• pp.23-38
• /
• 2022

In this paper, a pitch-type wave energy converter (WEC-rotor) is investigated in irregular wave conditions for the real sea testing at the west coast of Jeju Island, South Korea. The present research builds on and extends our previous work on regular waves to irregular waves. The hydrodynamic characteristics of the WEC-rotor are assessed by establishing a quasi-two-dimensional numerical wave tank using computational fluid dynamics by solving the Reynolds-averaged Navier-Stokes equation. The numerical solution is validated with physical experiments, and the comparison shows good agreement. Furthermore, the hydrodynamic performance of the WEC-rotor is explored by investigating the effect of the power take-off (PTO) loading torque by one-way and two-way systems, the wave height, the wave period, operational and high sea wave conditions. Irrespective of the sea wave conditions, the absorbed power is quadratic in nature with the one-way and two-way PTO loading systems. The power absorption increases with the wave height, and the increment is rapid and mild in the two-way and one-way PTO loading torques, respectively. The pitch response amplitude operator increases as the wave period increases until the maximum value and then decreases. For a fixed PTO loading, the power and efficiency are higher in the two-way PTO loading system than in the one-way PTO loading system at different wave periods.