• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.177-182
• /
• 1983

Direct conversion of starchy materials to single cell protein of Sporobolomyces holsaticus FRI Y-5 was investigated. Effect of yeast extract concentration on its cell growth showed that it could utilize more of starch in the medium containing 2.5 g/l of yeast extract. In case of jar fermentor culture, the specific growth rate and cell yield of Sp. holsaticus on soluble starch were calculated to be $0.14\;hr^{-1}$ and 0.425, respectively and its maximum cell concentration was 13.4 g/l. After 80 hr of incubation time, 45.96% of starch was consumed and 45.1% of relative blue value was decreased. Reducing sugars in the starch medium seemed to increase from 4.06 g/l to 6.08 g/l and then to decrease. During fermentor culture, pH of medium was almost not changed in the range of $pH\;7.0{\pm}0.5$. The optimal temperature and pH of Sp. holsaticus amylase activity were $40^{\circ}C$ and pH 7.5, respectively. It was shown from the effect of Tapioca starch concentration on the cell growth that the optimal concentration of Tapioca starch for Sp. holsaticus was lower than that of soluble starch. FRI Y-5 cells settled much slower than Sp. holsaticus IFO 1032 cells and the viscosity vs cell concentration relationship was related to be linear.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.6
• /
• pp.501-511
• /
• 2014

Bio-oil derived from biomass through fast pyrolysis process has the potential to displace a significant amount of petroleum fuels. However, the use of bio-oil in a diesel engine is very limited because of its poor properties, e.g., its low energy density, low cetane number, and high viscosity. Therefore, bio-oil should be emulsified or blended with other fuels that have high centane numbers. Because bio-oil has poor miscibility with petroleum fuels, the most suitable candidate fuels for direct mixing are alcohol fuels. In this study, bio-oil was blended with ethanol, and two types of cetane improvers were added to a blended fuel to improve the self-ignition property. The two types of cetane improvers, PEG 400 and 2-EHN, made it possible for bio-oil blended fuels to combust in a diesel engine with a maximum bio-oil content of 15 wt%. A high-compression-ratio piston is also proposed for the combustion of bio-oil in a diesel engine.

• Journal of Adhesion and Interface
• /
• v.10 no.2
• /
• pp.90-97
• /
• 2009

Dispersion and self-sensing evaluation for single-carbon fiber reinforced in three different acid-treated CNT-epoxy nanocomposites were investigated by electro-micromechanical techniques and wettability tests. Self-sensing based on contact resistivity exhibited more noise for single carbon fiber/acid-treated CNT-epoxy composites than it did for untreated CNT. However, the apparent modulus was higher the acid treated case than the untreated case which is attributed to better stress transfer. The interfacial shear strength (IFSS) between carbon fibers and the CNT-epoxy was lower than that between carbon fiber and neat epoxy due to the increased viscosity associated with the addition of the CNT. The CNT-epoxy nanocomposite exhibited more hydrophobicity than did neat epoxy. Change in the thermodynamic work of adhesion was consistent with changes in the IFSS but disproportional to that of the apparent modulus. The optimum condition of acid treatment on the need can be obtained instead of the maximum condition.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.1
• /
• pp.61-69
• /
• 2015

While the macroscopic properties and eruption style of basaltic and phonolitic melts are different, the microscopic origins including atomic structures are not well understood. Here we report the atomic structure differences of glass in diopside-anorthite eutectic composition (basaltic glass) and phonolitic glass using high-resolution 1D and 2D solid-state Nuclear Magnetic Resonance (NMR). The $^{27}Al$ MAS NMR spectra for basaltic glass and phonolitic glass show that the full width at half maximum (FWHM) of Al for basaltic glass is about twice than phonolitic glass, suggesting the topological disorder of basaltic magma is larger than that of phonolitic magma. The $^{27}Al$ 3QMAS NMR spectra for basaltic glass and phonolite glass show much improved resolution than the 1D MAS NMR, resolving Al and Al. Approximately 3.3% of Al is observed for basaltic glass, demonstrating the configurational disorder of basaltic magma is larger than phonolitic magma. This result confirms that the topological disorder of Al in basaltic glass is larger than that of phonolitic glass. The observed structural differences between basaltic glass and phonolitic glass can provide an atomistic origin for change of the macroscopic properties with composition including viscosity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.236-244
• /
• 1995

This study was carried out to clarify the changes in dry matter weight and physicochemical property of job's tears grain during ripening period. Four varieties of job's tears were seeded at April 20, May 10, and May 30, andgrains were harvested at every 7 days from heading to maturity, The whole seed weight of thick hull varieties, Kimje and Aewon, was higher than that of improved thin hull varieties, Suwon 3 and Suwon 6, from heading to maturity, However, the dehulled grain weight of thin hull variety were higher than that of thick hullvariety from 35 days after heading. The first heading spikelet showed lower 100-grain weight com-pared with the spikelets headed at full blooming stage among the same plant. The increased rate of de hulled grain weight during maturing period was higher in thin hull variety than thick hull one, later seeding date than early seeding, and intermediate headed spikelet than early head-ed one, respectively. As maturing proceeds the protein content of de hulled grain was decreased, alkali digestibility value(ADV) showed a rising trend, and little change was found in gel consistency of milled grain flour. And same trends were found in protein content, ADV and gel consistency as the seeding date was delayed. Among amylogram properties of job's tears flour the maximum, minimum, and final viscosity as well as breakdown were decreased, and set back was increased in later seeding plots

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.266-272
• /
• 1997

In order to investigate the compression and decompression properties of cucumber, radish, garlic, ginger and potato, edible parts of samples were prepared to size of ${\Phi}\;5\;mm{\times}H\;5\;mm$, and force deformation relationship during application and removal of force were observed. Compositions of sample and cell characteristics were measured, and correlations between them were investigated. Deformation rate was large in initial stage of compression and decreased afterward, but the reverse trends were observed in the decompression. The time and deformation to 9 N were large of 5.30 sec and 1.344 mm in potato, and small of 4.62 sec and 0.896 mm in garlic, respectively. Force(y)-deformation(x) curve between compression and decompression were clearly showed hysteresis loop and relationship of x and y were as follows: y=esp (a+b log(x)). The maximum work was $3.888{\sim}5.099{\times}10^{-3}\;J$ for potato in compression and $2.09{\times}10^{-3}\;J$ for garlic in decompression. Irrecoverable work were large as $77{\sim}96%$ in cucumber, radish and potato, and small as $36{\sim}42%$ in garlic. Compression deformation were large as $1.016{\sim}1.344\;mm$ in potato, and small as $0.656{\sim}0.896\;mm$ in garlic. Degree of elasticity were large as $0.756{\sim}0.777$ in garlic, and small as $0.301{\sim}0.465$ in radish and potato. Compression and decompression characteristic values were showed high correlation with moisture, viscosity of juice, ceil size, density and regularity.

• Applied Biological Chemistry
• /
• v.46 no.1
• /
• pp.39-45
• /
• 2003

This study was conducted to investigate the effect of ash contents of bread flour on the rheology of frozen dough In making frozen dough by measuring amylograph, flrinograph and extensograph. The quality of frozen-stored dough under freezing condition ($-20^{\circ}C$, 12 weeks) was evaluated by measuring final proof time, moisture content, baking loss, loaf volume and hardness of bread with storage time. In bread flour with high ash content farinogram showed that water absorption, degree of softening increased but valorimeter value decreased. In bread flour with low ash content amylogram showed that gelatinization temperature and maximum viscosity increased and extensogram showed that the area and resistance of the bread flour increased. As the proof time increased the extensibility decreased. Final proof time of frozen dough was shortened at the bread flour with low ash content with storage time. In bread using the flour with high ash content, moisture content, increased but baking loss rate decreased while the hardness of product increased slowly with time. But in bread using the flour with low ash content, the loaf volume of baking increased but the hardness of product decreased. As the frozen storage time was shortened, the product was more stable and better in quality.

• Food Science and Preservation
• /
• v.15 no.6
• /
• pp.852-858
• /
• 2008

This study investigated the rheological properties of bread dough supplemented with lotus (Nelumbo nucifera) seed powder. The rheological properties measured were dough volume, farinogram, amylogram, extensogram, pH and outernal. The lotus seed powder contained 7.74% moisture, 20.15% crude protein, 2.11% crude fat, 4.34% crude ash, and 2.78% crude fiber. The farinogram showed that with increasing concentration of lotus seed powder the absorption rate of the dough increased slightly, the development time and stability decreased, and the degree of attenuation tended to be grown along. From the amylogram it was found that the gelatinization onset temperature and the maximum viscosity of the dough tended to increase with increasing content of lotus seed powder. The extensogram showed that the degree of extension of the dough decreased with increasing content of lotus seed powder, while the degree of resistance and resistance/extensibility increased. The dough pH tended to decrease with fermentation time, but increased with increasing content of lotus seed powder. A concentration of $5{\sim}10%$ lotus seed powder appears to be suitable for the preparation of dough.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.2
• /
• pp.157-162
• /
• 1995

When fish meat is washed for the processing of surimi, about 50ff of lipid in the fish meat is removed from the fish meat to the effluent. The removed lipid was easily recovered by centrifugation or filteration of wastewater washed fish meat. Then, the recovered lipid was utilized as a material of mayonnaise sauce processing. The major fatty acids in the recovered lipids are $C_{16:0},\;C_{18:0},\;C_{16:1},\;C_{20:5},\;and\;C_{22:6}$ Polyenoic fatty acids were composed of $33.6\%$ to total fatty acids. When the recovered lipid was substituted for soybean oil in processing of mayonnaise sauce, the maximum percentage of substitution ratio presumed to be $30\%$ according to viscosity, color difference, and emulsion stability evalution for the substituted ones.

• The Korean Journal of Rheology
• /
• v.10 no.4
• /
• pp.195-201
• /
• 1998

We have studied the rheological and electrical properties of two types of electrorheological (ER) fluids based on semi-conductive polymers (poly(p-phenylene) and polyaniline). These semi-conductive polymer-based suspensions showed a dramatic increase in viscosity on the application of the static electric field due to the large value of conductivity ratio between particle and medium. The dynamic yield stresses of these ER suspensions exhibited a quadratic dependence on electric field strength at low electric fields and a linear one for high fields. They showed a maximum and then decreased with increasing bulk conductivity of particles. These yield stress behaviors under the static electric field were found to be closely related to the dielectric properties, which is in accord with Maxwell-Wagner interfacial polarization induced by the conductivity effects. In order to achieve better understanding of interfacial polarization effect on ER response and to improve the stability of ER suspension, different kinds of surfactants were employed for controlling the ER activity as well as for enhancing the colloidal stability of suspensions.