• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3448-3454
• /
• 2014

기존의 구조해석은 탄성해석을 일반적으로 실무에서 주축으로 해왔다. 때문에 보다 정밀한 해석을 위하여 재료와 기하학적인 비선형을 고려한 해석의 필요성이 끊임없이 대두되어 왔다. 따라서 본 연구에서는 간단한 모델을 제작하여 비선형 원리를 적용한 최적화를 수행하여 기존의 구조해석의 경험자들은 누구나 용이하게 해석을 수행할 수 있는 이론과 방법을 제시하는데 있다. 본 연구에서 소개되는 모델은 금형 다이리브에 적용될 수 있도록 전단하중에 대하여 충분한 강도로 Strain, Stress가 적게 발생하게 하여, 초기에는 Strain, Stress가 크기에 맞게 형상을 재구성하고 Hyperstudy와 Abaqus 연동에 의한 비선형으로 해석하고 제품에서 허용되는 최대, 최소 Stress 범위와 최소 Strain을 갖는 조건하에서 일정한 증가치를 만들게 하였다. 실험 모델에서 Plate 두께가 40 Newton의 힘으로 주어질 때 Iteration 처리로 금형 두께에 따른 Stress와 Strain에 대한 금형두께에 적용하고자 했을 때 7~8mm 두께가 최적화라는 결론을 얻을 수 있었다.

• 한국지반공학회논문집
• /
• 제23권5호
• /
• pp.143-151
• /
• 2007

고결모래의 거동은 고결정도, 상대밀도, 응력조건, 그리고 입자특성 등에 의해 영향을 받으며, 특히 고결모래의 강도에 영향을 끼치는 고결결합은 응력에 의해 파괴되기 때문에 고결모래의 강도정수는 응력조건을 고려하여 평가되어야 한다. 일반적으로 고결모래의 마찰각은 고결결합에 의해 영향을 받지 않기 때문에 미고결 상태의 마찰각과 동일한 반면, 점착력은 고결결합에 의해 증가하는 것으로 알려지고 있다. 따라서 본 연구에서는 석고를 고결유발제로 하는 고결시료를 조성하여 다양한 구속압 조건에서 배수전단시험을 실시함으로써, 구속압 변화에 따른 고결모래의 강도정수를 평가하였다. 실험결과 고결모래의 점착력은 고결정도와 구속압의 크기에 따라 고결지배구간, 천이구간, 응력지배구간에서 다르게 평가되었다. 또한 본 연구에서는 고결결합을 파괴시키지 않고 강도정수를 평가하기 위한 적정 구속압을 결정하기 위해 고결정도를 표현하는 일축압축강도와 고결결합을 파괴시키지 않는 최대 구속압의 관계를 결정하였다.

• 콘크리트학회논문집
• /
• 제26권1호
• /
• pp.79-86
• /
• 2014

이 연구는 표면매입 보강된 FRP 판과 콘크리트사이의 응력전달기구를 이론적으로 연구한 것으로서 이선형 부착모델을 이용하여 부착거동을 묘사하고 이를 실험 결과와 비교하여 신뢰성있는 해석방법을 제시하였다. 연구로부터, 표면매입된 FRP 판과 콘크리트사이의 계면특성을 고려한 미분방정식에 이선형 부착-미끄러짐 관계곡선을 사용하여 해석할 경우, 모델의 임계값인 최대전단강도와 미끄러짐 변위, 그리고 박락에 의한 연화거동이 시작될 때의 변위값 선정과정이 제시되었다. 또한 제안된 모델을 사용하여 부착길이가 다르게 보강된 표면매입 FRP 판의 미끄러짐 거동을 해석한 결과 실제 거동을 매우 근사하게 묘사할 수 있는 것으로 나타났다.

• 대한의용생체공학회:의공학회지
• /
• 제2권2호
• /
• pp.89-102
• /
• 1981

The recirculating flows which occur in the prosthetic heart valve have been known to cause several diseases in the human body. And the recent studies show that the shear stress at the wall of the artery is also very important factor in the formation of thrombus. And many studies knave been devoted in obtaining more information about the blood flow through the prosthetic heart valve. In this Paper, the steady axisymmetric flow through the Disc-Type Heart Valve is studied by using the numerical method. The geometry of the Disc-Type Heart Valve is simplified, and the flow is assumed to be steady axisymmetric flow. The vorticity transport equation derived from the Wavier-Stoke's equation is used as the governing equation, and the explicit finite difference method is used to obtain the steady state solution. The results for several Reynolds numbers show that the recirculating flow becomes large as the Remolds number increases. Furthermore, it can be shown that the magnitudes of the vorticity and the stresses are also increased with the Reynolds number, but there is only a little change in their configurations of distribution and in their positions of maximum values.

• 한국전산유체공학회지
• /
• 제17권4호
• /
• pp.24-31
• /
• 2012

Effects of the subgrid length-scale in the Delayed-Detached Eddy Simulation(DDES) are investigated based on the Spalart-Allmaras(S-A) and the k-$\omega$ Shear Stress Transport(SST) turbulence models. Driver & Seegmiller's experimental results are used to validate numerical results. Grid convergence with grid resolution and subgrid length-scale is investigated. The simulation results show that the volume method for the subgrid length-scale is more resistant to unfavorable effects of the grid size in the periodic direction than the maximum method. Using a sufficient grid resolution and an appropriate subgrid length-scale, both S-A based DDES and SST based DDES methods can provide a good correlation with the experimental data.

• Wind and Structures
• /
• 제26권1호
• /
• pp.1-9
• /
• 2018

This research studies the dynamic analysis of a concrete column reinforced with titanium dioxide ($TiO_2$) nanoparticles under earthquake load. The effect of nanoparticles accumulation in a region of concrete column is examined using Mori-Tanaka model. The structure is simulated mathematically based on the theory of sinusoidal shear deformation theory (SSDT). By calculating strain-displacement and stress-strain relations, the system energies include potential energy, kinetic energy, and external works are derived. Then, using the Hamilton's principle, the governing equations for the structure are extracted. Using these equations, the response of the concrete column under earthquake load is investigated using the numerical methods of differential quadrature (DQ) and Newark. The purpose of this study is to study the effects of percentage of nanoparticles, nanoparticles agglomeration, geometric parameters and boundary conditions on the dynamic response of the structure. The results indicate that by increasing the volume percent of $TiO_2$ nanoparticles, the maximum dynamic deflection of the structure decreases.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권1호
• /
• pp.73-82
• /
• 2016

In order to extend the operational life of Underwater Moored Platforms (UMPs), a horizontal axis water turbine is designed to supply energy for the UMPs. The turbine, equipped with controllable blades, can be opened to generate power and charge the UMPs in moored state. Three-dimensional Computational Fluid Dynamics (CFD) simulations are performed to study the characteristics of power, thrust and the wake of the turbine. Particularly, the effect of the installation position of the turbine is considered. Simulations are based on the Reynolds Averaged Navier-Stokes (RANS) equations and the shear stress transport ${\kappa}-{\omega}$ turbulent model is utilized. The numerical method is validated using existing experimental data. The simulation results show that this turbine has a maximum power coefficient of 0.327 when the turbine is installed near the tail of the UMP. The flow structure near the blade and in the wake are also discussed.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.41-51
• /
• 2004

A direct numerical simulation is performed to analyze the effects of a localized time-periodic blowing on a turbulent boundary layer flow at R $e_{+}$=300. Main emphasis is placed on the blowing frequency effect on near-wall turbulent flow structures at downstream. Wall-normal velocity on a spanwise slot is varied periodically at different frequencies (0.004$\leq$ $f^{＋}$$\leq$0.080). The amplitude of periodic blowing is $A^{＋}$=0.5 in wall nit, which corresponds to the value of $v_{rms}$ at $y^{＋}$=15 without blowing. The frequency responses are scrutinized by examining the phase or time-averaged turbulent statistics. The optimal frequency ( $f^{＋}$=0.03) is observed, where maximum increase in Reynolds shear stress, streamwise vorticity fluctuations and energy redistribution occurs. The phase-averaged stretching and tilting term are investigated to analyze the increase of streamwise vorticity fluctuations which are closely related to turbulent coherent structures. It is found that the difference between PB and SB at a high blowing frequencies is negligible.e.e.

• 자원환경지질
• /
• 제14권1호
• /
• pp.35-49
• /
• 1981

The studied area is largely occupied by thick piles of the late Cretaceous volcanic rocks of the Yucheon group, which is northeastern border part of the vast volcanic region in the Yucheon basin. The Yucheon group overlies the Geoncheonri Formation and is intruded by granitic and dioritic stocks and dykes. The group can be devided into two parts; the lower is Jusasan andesitic rocks which was called as Jusasan Porphyrite Formation by Tadeiwa in 1929, and the upper is Unmunsa rhyolitic rocks. The volcanic pile consists mainly of various tuffs such as tuff breccia, lapilli tuff, coarse to fine tuff and tuffaceous sediments, and interlayered flows, which range from basaltic andesite to rhyolite in their lithology. The results of petrochemical and volcanostratigraphic studies on the Jusasan andesitic socks suggest that the volcanic rocks were derived from two cyclic evolutions of magmatic fractionation. Systematic study of 5226 joints from the area reveals two sets of steep joints striking $N20^{\circ}-40^{\circ}E$ and $N40^{\circ}-70^{\circ}W$, are dominant and coincide with the fault pattern developed in the area. Three defferent maximum principal stress axes were recognized from conjugate shear joints, which are trending east-west, north-northwest, and north-northeast.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.379-381
• /
• 2011

Direct numerical simulations (DNSs) of spatially developing turbulent boundary layers (TBLs) over two-dimensional (2-D) and rod and three-dimensional (3-D) cube rough walls were performed to investigate the effects of streamwise spacing on the properties of the TBL The 2-D and 3-D roughness were periodically arranged in the downstream direction with pitches of px/k=2, 3, 4, 6, 8 and 10 and for the cube, the spanwise spacing is fixed to pz/k=2 with staggered array, where px and pz are the streamwise and spanwise spacings of the roughness and k is the roughness height. Inspection of the Reynolds stresses showed that except for px/k=2 and 3 over the 2-D rough walls, the effects of the surface roughness extend to the outer layer over the 2-D and 3-D rough walls and the magnitude of the Reynolds shear stress in the outer layer is increased with proportion to px/k. However, such results are contrary to the trends of form drag, roughness junction and roughness length against px/k, which showed the maximum values at px/k=8 and 4 over the 2-D and 3-D rough walls respectively.