• Ocean Systems Engineering
• /
• 제12권1호
• /
• pp.23-38
• /
• 2022

In this paper, a pitch-type wave energy converter (WEC-rotor) is investigated in irregular wave conditions for the real sea testing at the west coast of Jeju Island, South Korea. The present research builds on and extends our previous work on regular waves to irregular waves. The hydrodynamic characteristics of the WEC-rotor are assessed by establishing a quasi-two-dimensional numerical wave tank using computational fluid dynamics by solving the Reynolds-averaged Navier-Stokes equation. The numerical solution is validated with physical experiments, and the comparison shows good agreement. Furthermore, the hydrodynamic performance of the WEC-rotor is explored by investigating the effect of the power take-off (PTO) loading torque by one-way and two-way systems, the wave height, the wave period, operational and high sea wave conditions. Irrespective of the sea wave conditions, the absorbed power is quadratic in nature with the one-way and two-way PTO loading systems. The power absorption increases with the wave height, and the increment is rapid and mild in the two-way and one-way PTO loading torques, respectively. The pitch response amplitude operator increases as the wave period increases until the maximum value and then decreases. For a fixed PTO loading, the power and efficiency are higher in the two-way PTO loading system than in the one-way PTO loading system at different wave periods.

• 한국강구조학회 논문집
• /
• 제18권5호
• /
• pp.563-574
• /
• 2006

본 연구에서는 개단면 리브를 갖는 보강판에 대하여 재하 크기가 보강판의 처짐에 미치는 영향을 살펴보고, 직교이방성 강성비를 매개변수로 하여 이를 정형화하고자 하였다. 재하 크기에 따른 보강판의 처짐 양상을 살펴보기 위하여, 집중하중과 3가지 크기의 등분포 하중을 판의 중앙에 위치한 리브 위에 작용시켜 해석하였다. 여러 가지 보강판에 대한 분석 결과, 집중하중에 대한 분포하중의 중앙점 처짐 비율은 재하 크기가 작을수록 크게 나타남을 알 수 있었으며, 이러한 처짐 비율은 리브 간격별로 강성비의 함수로 표현할 수 있음을 알 수 있었다. 또한, 분포하중 작용시 보강판의 최대 처짐은 국부 처짐의 발생으로 중앙점이 아닌 위치에서 발생하며, 중앙점 처짐에 대한 최대 처짐의 증가 비율은 리브 간격별로 강성비의 함수로 표현할 수 있음을 알 수 있었다. 본 연구에서 제안한 함수식을 직교이방성 판 해석에 적용한 결과 정확도의 향상을 나타내었으며, 또한 변장비 및 지지 조건이 다른 경우에 적용한 결과 타당한 결과를 나타내어, 본 연구에서 제안한 함수식을 이용하면, 직교이방성 판 해석시 간편하게 분포하중을 받는 보강판의 중앙점 처짐과 최대 처짐을 산정할 수 있을 것으로 판단된다.

• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.99-108
• /
• 2012

In this paper, fatigue tests are conducted for the specimens with longitudinal and transverse attachment under variable amplitude axial loading based on storm model. Considered loadings include repeated single storm, 6 or 8 storms randomly, and storms including calm sea condition while the mean stress and the maximum stress of loadings are changed. The effect of three variables are investigated; root mean square(RMS) value of stress amplitude, mean stress shift and maximum stress, which can characterize storm loading on fatigue life. In addition, experiments including calm sea loading are also carried out to investigate the effect of calm sea state. Test results are evaluated and compared with DNV-CN2005 and Matsuoka's method for the estimation of crack initiation and propagation life. To verify the validity of the criteria, the measured crack initiation lifes are compared with the specific crack length 15mm, which are calculated with beach marks.

• 산업기술연구
• /
• 제22권A호
• /
• pp.169-176
• /
• 2002

The purpose of this paper is to investigate for strain measurement of concrete pavement slab at field. The early-age behaviors of concrete pavement were measured using the strain gages. From the static and dynamic wheel loading tests, the outputs from each gages were recorded. The measured data, also, was compared to those from finite element analysis. The static wheel loading tests were performed in twice, and the dynamic wheel loading tests were performed at the speed 10km-50km. The results could be summarized as follows: To embed the strain gage accurately and stably in concrete pavement, a chair and protective box must be used. The protective box must not be affected from the outside vibrating. From the results of early-age stram measurement, it was found that the strain varied at the maximum value of $180{\mu}{\varepsilon}$ From the results of static wheel loading tests, A1, A2 and B gages generally developed a consistent tendency When comparing the results from the measured at field and the calculated by FEM analysis, the data of A1 and B gages were similar to that from theory. The values from the field test were generally higher than that from the theory. From the results of dynamic wheel loading tests, it was known that the measured strain at field became smaller as the truck speed became faster, Indicating the maximum at the range of $12{\sim}13{\mu}{\varepsilon}$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.377-382
• /
• 2001

Mechanical behavior and electrical resistance change of CPDP (carbon particle dispersed plastic) composite consisting of epoxy resin and conductive carbon particle were investigated under monotonic loading and repeated loading-unloading. The electrical resistance almost linearly increased with increasing strain during loading and the residual electrical resistance was observed even after removing load. The value of the residual electrical resistance was dependent on the maximum strain under the applied stress. This result suggests that the estimation of maximum strain (i.e., damage) is possible by the measuring electrical resistance of composite. The behavior of electrical resistance change during and after loading was discussed on the basis of the results of microscopic deformation and fracture observation. Moreover, the relationship between the volume fraction of carbon particle and the electrical resistivity of CPDP was investigated in relation to the percolation theory. Simulation model of percolation structure was established by Monte Carlo method and the simulation result was compared to the experimental results. The electrical resistance change under applied loading was analyzed quantitatively using the percolation equation and a simple model for the critical volume fraction of carbon particle as a function of the mechanical stress. It was revealed that the prediction was in good agreement with the experimental result except in the region near the failure of material.

• 한국물환경학회지
• /
• 제32권5호
• /
• pp.450-457
• /
• 2016

The Total Maximum Daily Load (TMDL) is a watershed management system that involves the establishment of the target water quality, the calculation of permission loading (allocation loading), and the control of total pollutants for each unit watershed. Allocation loading is assessed through the comprehensive implementation assessment of the previous year's plan. Assessment results are used for follow-up management measures such as the limit of development and updating of TMDL Management Implementation Plans for the next planning period. Although detailed assessment criteria are important, they are not currently available. Therefore, we suggested assessment criteria by comparing two methods('integration method' and 'separation method') using combination point and non-point discharge loading. We also examined the penalty criteria considering controllable load local government and updating methods of the TMDL Management Implementation Plan for the next planning period.

• 한국지반공학회논문집
• /
• 제27권11호
• /
• pp.27-37
• /
• 2011

모래지반에서 석션파일의 최대인발저항력 산정을 위한 일련의 원심모형실험이 수행되었다. 최대인발저항력 산정을 위한 실험인자인 석션파일의 인발각과 인발작용점의 위치에 대하여 실험을 수행하였다. 인발작용점의 경우 75%에서 최대인발저항력이 관찰되었다. 모든 경사각에 대하여 전체파일 높이에서 50%에서 75%사이에 석션파일의 회전각이 변함을 알 수 있었다. 인발각이 증가함에 따라 최대 인발저항력 발생 시까지의 변위가 점점 작아짐을 알 수 있었다. 석션파일의 형상중심의 수직변위를 최대인발저항력이 작용한 시점에서 관찰한 결과 모두 지표 쪽으로 이동한 것을 알 수 있었다.

• 한국컴퓨터산업학회논문지
• /
• 제3권3호
• /
• pp.391-406
• /
• 2002

최근 관심을 끌고 있는 VOD 시스템을 현실적으로 실현 가능하게 하기 위해서는 대용량 멀티미디어 정보를 장기적으로 저장할 수 있도록 저가이면서 저장 용량이 큰 3차 저장장치를 사용하는 계층적 VOD 서버를 필요로 한다. 본 논문은 이러한 계층적 VOD 서버를 저가의 대용량 DVD 쥬크박스를 온라인 저장장치로 사용하여 구성하고, 여러 개의 스트림들을 적당한 시간을 주기로 드라이브들을 교대로 활용하게 함으로써 서비스 스트림을 최대화함으로써 효율을 높일 수 있다. 그러나 DVD 쥬크박스 내에서 하나의 스트림이 저장된 DVD-ROM의 교환은 상대적으로 긴 시간을 요구하므로 본 논문에서는 DVD 쥬크박스를 기반으로 한 VOD 서버에서 DVD-ROM의 교환시간을 은폐하면서 효율적인 데이터 전송을 지원 할 수 있는 파이프라인 로딩 기법을 제안한다. 또한 디스크를 캐쉬로 사용하여 스트림의 초기 일부분을 미리 디스크 캐쉬에 적재하여 놓음으로써 최대허용 스트림 수를 증가시킬 수 있는 기법을 제안한다. 제안된 기법들은 시뮬레이션 성능분석을 통하여 파이프라인 상황하에서 사용하는 드라이브 수에 비하여 최대 허용 스트림 수가 크게 증가될 수 있음을 보인다.

• 한국농공학회논문집
• /
• 제64권3호
• /
• pp.45-52
• /
• 2022

Prediction of soil behavior should be interpreted based on the level of axial strain in the actual ground. Recently numerical methods have been carried out focus on the state of soil failure. However considered the deformation of soil the prior to failure, mostly the small strain occurring in the elastic range is considered. As a result of calculating the deformation modulus to 50% of the maximum unconfined compression strength, Deformation modulus (E50) showed a tendency to increase according to the degree of compaction by region. The Poisson's ratio during loading-unloading was 0.63, which was higher than the literature value of 0.5. For the unconfined compression test under cyclic loading for the measurement of permanent strain, the maximum compression strength was divided into four step and the test was performed by load step. Changes in permanent strain and deformation modulus were checked by the loading-unloading test for each stage. At 90% compaction, the permanent deformation of the SM sample was 0.21 mm, 0.37 mm, 0.6 mm, and 1.35 mm. The SC samples were 0.1 mm, 0.17 mm, 0.42 mm, and 1.66 mm, and the ML samples were 0.48 mm, 0.95 mm, 1.30 mm, and 1.68 mm.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.338.1-338
• /
• 2002

In this report, numerical investigations have demonstrated, that the displacement underneath a moving loading reach a maximum value, if the speed of the load is equal to propagation velocity of the maximum wave. The load speed for which the maximum displacement occurs is called critical speed. The critical speed divides the velocities in a subcritical and a super-critical region. By means of calculations the dynamic behaviour of the slab track-soil is investigated. (omitted)