• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.12
• /
• pp.71-79
• /
• 1994

In this paper, $As_{40}Se_{50-x}S_[x}Ge_{10}$(x=0, 25, 35, at.%) bulk and thin films, to develope device of reversible hologram, proved amorphous by X-RD analysis. On the thin films with composition rate, as Se-doped-quantity increased, absorption edge shifted to long wavelength, and we found that reversible photodarkening effect occurred when thin films are exposed and annealed. Optical energy gap was larger when thin films are annealed than exposed. In this effect thin films structurally stabilized by annealing. It is to formed grating hologram by the bragg method on the $As_{40}Se_{15}S_[35}Ge_{10}$ thisn films with the best transmittance properties As polariging angle grew larger, we found that maximum diffraction efficiency became smaller, and obtained it of 4.5% on the thin fim thicknesss of 0.6 m, polarizing angle of 40$^[\circ}$ and exposing for 20sec.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.7
• /
• pp.1145-1151
• /
• 2004

The experiment of thermal performance about cross flow type cooling tower was conducted in this study. Generally the ambient air condition can affect the thermal performance of cooling tower to improve or not. However it is hard to control the cooling water temperature that we want under bad air condition or during rainy season. In this paper, the effect of variables, which the ambient air have. especially wet-bulb temperature, are experimentally investigated for controlling the cooling water temperature more successfully. The result is that there is appropriate air flow rate in respective air condition to preserve the cooling performance in the cooling tower and the maximum air flow rate can't overcome the approach under bad air condition.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.130-137
• /
• 2012

Blast walls are integral structures at the typical offshore topside module to provide safety barriers for personnel and critical equipment against any blast loading and hydrocarbon explosions. The blast wall structures are usually configured with stainless steel. It can be referred as the good mechanical properties of the stainless steel against blast load, which features the characteristics of significant energy absorption and ductility. In this study, the proposed designs of corrugated panel are examined in order to determine the best design which satisfies the design criteria. The criteria on maximum deflection and stress are used to decide the best design. The effect of inclined angle of profile on deformation characteristics of blast wall is also performed. The numerical study was performed by using NX Nastran 7.5.

• Rapid Communication in Photoscience
• /
• v.2 no.2
• /
• pp.52-55
• /
• 2013

Proteorhodopsin (PR) is a photoinduced proton pump found abundantly in ocean and fresh water habitat, and has an important role in photoenergy conversion to bioenergy in the living cells. Numerous sequences that encode PR protein variants were discovered by environmental genome sequencing and they indicated the high sequence similarity. A new-type of PR (YS-PR) which had been discovered from the surface of Yellow Sea was found to have only 5 amino acid differences from the previously known green-light absorbing PR (GPR) protein, but showed different photochemical properties. This YS-PR showed a 10 nm red-shifted absorption maximum, when compared with GPR. It also showed slower photocycling rate than GPR. However, the photoconversion rate of YS-PR was fast enough to pump protons. Four different amino acids out of 5 were similar to Blue-light absorbing PR (BPR), suggesting that those residues might be responsible for the observed spectral and photoconverting properties.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.201-210
• /
• 1994

A theoretical heat-flow model incorporating with a constant moving CO$_{2}$ laser beam has been analyzed to predict depth and the shape of bead section during last beam welding. The laser beam is exponentially attenuated with an abosrption coefficient in the material. The solution can be expressed in terms of normalized variables. The experimental data were generated by usint CW 2 CO$_{2}$ laser with multi beam mode and CW 3 kW CO$_{2}$laser with Gaussian mode. The specimens were made as bead-on-plate welds for SM 10C, STS 304, STS 316, STS 420 and pure Nickel. The maximum possible penetration depth and the shape of beas section for given sources of laser power, travel speed and beam spot size can be prdicted with this model in a given material.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2575-2580
• /
• 2010

We present a method for chemically reducing silver alkylcarbamate complex with hydrazine to synthesize silver nanocolloids in an organic solvent using polyvinylpyrrolidone (PVP) as the stabilizer. To determine the optimal conditions for preparing stable silver colloids of controlled size and shape, the silver 2-ethylhexylcarbamate (Ag-EHCB) complex, PVP, hydrazine, and 2-propanol solvent concentrations in the reaction mixture were varied. The initial colloid has a mean particle diameter of 5-80 nm, and it exhibits an absorption band with various shapes in the UV region with a maximum near 420 nm. UV-vis spectroscopy, TEM, and X-ray diffraction techniques were used to investigate the formation and growth process of the metallic silver nanocolloids.

• YAKHAK HOEJI
• /
• v.35 no.1
• /
• pp.15-21
• /
• 1991

Quaternary amines which are widely used as medicines are nitrogen compounds. Metanil yellow(MY) and benzalkonium chloride(BKC) were mixed and added to 10ml of the buffer solution and then the solution was shaken for 5 minutes. The maximum absorption wavelength of the reaction product was 402 nm. Dichloromethane was the best extracting solvent among the several organic solvents and the most suitable pH range was 2~8. When the BKC-MY calibration curve was made in the best experimental condition, the Lambert-Beer's law was obeyed in the range of BKC concentration of 2$\times$$10^{-6}$~9$\times$$10^{-6}$M by UV spectrophotometer. This method was possible to determine quaternary ammonium salts in the pharmaceutical preparation.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.1
• /
• pp.8-14
• /
• 2010

This study was carried out to develop an optimum baking formula and baking process for a new bread raw material with added Cordyceps militaris powder, which has been known to prevent various adult diseases and cancers. The rheological properities of dough made from Cordyceps militaris powder-wheat flour with 0, 1, 2, and 3% Cordyceps militaris powder added-were investigated. A farinogram showed that the water absorption and weakness value of dough increased with added Cordyceps militaris powder, but development time and dough stability were decreased. An extensogram showed that resistance to extension was increased in bread with 1% Cordyceps militaris powder, but decreased in bread with 2% and, 3% powder. Extensibility decreased fermentation progressed. An amylogram showed that gelatinization point was increased but maximum viscosity was decreased with added Cordyceps militaris powder. With increased amounts of powder dough volume during fermentation was reduced. The change in pH values of dough after mixing, fermentation, and proofing decreased with increased amounts of added powder.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.385-390
• /
• 2003

As growing of industrialization and increasing of population, the quantities of waste glasses are rapidly growing in the earth. It cause some problems such as the waste of natural resources and environmental pollution. In this context, recycling waste glass as a material of concrete has a great advantage environmentally and economically. This study is aimed to investigate the effect of load and deflection on fiber reinforced concrete slab model utilizing waste glass by fine aggregates. The flexural strength of the concrete including waste glass increased considerably, as the inclusion rate of steel fiber were increased. And the first crack load, maximum load and energy absorption capacity increased remarkably as the inclusion rate of steel fiber were increased. Therefore, in this study we confirmed the possibility of application for the usage of waste glass to the steel fiber reinforced concrete.

• The Korean Journal of Emergency Medical Services
• /
• v.5 no.1
• /
• pp.15-22
• /
• 2001

This study has measured the pulmonary function by treadmill test for 6 young women who were in twenties, and analyzed the respiratory-circulatory function and the change of hormone and immune response after performing the exercise program (60% severity) for 10 weeks. The results are as follows; 1. 10 weeks regular exercise made a decrease in weight and body fat proportion, and improved the respiratory-circular function by increasing the maximum oxygen absorption and ventilation. 2. 10 weeks regular exercise made a significant increase in count of WBC, lymphocyte, and T lymphocyte, but a significant decrease in B lymphocyte. NK cell also showed an increase in counts, but insignificant. 3. 10 weeks regular exercise made a significant increase in blood norepinephrine level. Epinephrine and cortisol also showed an increase in count, but insignificant. In summary, it suggested that 10 weeks regular exercise improves the immune function by decrease in body fat, increase in respiratory-circular function and metabolic efficiency, and also by raising Th/Ts ratio (an increase in count of WBC, lymphocyte, and T lymphocyte, but a decrease in suppressor T lymphocyte).