• Structural Engineering and Mechanics
• /
• v.62 no.2
• /
• pp.247-258
• /
• 2017

Beam-like structures such as bridge, high building and tower, pipes, flexible connecting rods and some robotic manipulators are often excited by support motions. These structures are important in machines and structures. So, this study proposes an analytic method to accurately predict the dynamic behaviors of the structures during support motions or an earthquake. Using Timoshenko beam theory which is valid even for non-slender beams and for high-frequency responses, the analytic responses of fixed-fixed beams subjected to a real seismic motions at supports are illustrated to show the principled approach to the proposed method. The responses of a slender beam obtained by using Timoshenko beam theory are compared with the solutions based on Euler-Bernoulli beam theory to validate the correctness of the proposed method. The dynamic analysis for the fixed-fixed beam subjected to support motions gives useful information to develop an understanding of the structural behavior of the beam. The bending moment and the shear force of a slender beam are governed by dynamic components while those of a stocky beam are governed by static components. Especially, the maximal magnitudes of the bending moment and the shear force of the thick beam are proportional to the difference of support displacements and they are influenced by the seismic wave velocity.

• The Journal of Natural Sciences
• /
• v.7
• /
• pp.59-65
• /
• 1995

A bacterium which produce hyaluronic acid complex was isolated from soil, and identified as Klebsiella sp. L-10. The maximal hyaluronic acid complex production was obtained when the strain was cultured at $37^{\circ}C$ for 18hrs with shaking in the optimal medium containing 0.1% yeast ext., 3% tryptone, 5% glucose, 10mM $K_2HPO_4$and $KH_2PO_4$, respectively and initial pH6.5 and the final hyaluronic acid complex production under the above condition was 1,400mg per liter of cultures.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.389-393
• /
• 2002

Among the bacterial strains isolated from chungkook-jang, Bacillus subtilis CH-1, Bacills circulans K-1 and Bacillus subtitis (natto) N-1, Bacillus subtitis CH-1 showed the highest productivity of biosufactant. A-medium was selected for the basal medium in the large scale production of biosurfactant, and modified to synthetic medium which containing 2% glucose, 0.3% soy peptone, and mineral salts. The surface tension was reduced to maximal value after 96 hr after fermentation, about the 43% of initial tension. Temperature and initial pH of medium was not critical factor for the biosurfactant production. The yield of crude biosurfactant was 6 g/L under the optimum condition.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.3
• /
• pp.279-284
• /
• 2013

The purpose of this study was to determine the effect of head posture and respiratory pattern on muscle activities of sternocleidomastoid (SCM) and scalene during maximal respiration. The seventeen subjects with upper-costal breathing pattern were participated in this study. Surface electromyography was used to measure the muscles activities of SCM and scalene. The volume and velocity of inspiration were monitored by using the spirometer in each subject. Each subject was performed the 3-cycle of respiration in each condition. The mean values of three peak muscle activity in each muscle were used in the data analysis. A2 (head posture: forward head posture: FHP vs. neutral posture) X 2 (breathing pattern: costal vs. diaphragmatic) repeated-measures analysis of variance (ANOVA) was used to compare the normalized muscle activities of the SCM and scalene. The results showed that the muscle activities of SCM and scalene in diaphragmatic breathing were significantly lower than those in costal breathing for each head posture (p<.0125). The muscle activities of SCM in neutral position were lower than those in forward head position during costal breathing (p<.0125). The diaphragmatic breathing in neutral position of head is recommended to decrease the tension of the accessory inspiratory muscles during respiration in neck-pain patients with FHP.

• Journal of Chest Surgery
• /
• v.2 no.2
• /
• pp.141-146
• /
• 1969

The importance of bronchial occlusion which occurs in the natural course of tuberculosis as an inconstant but very fortunate event became obscured with the popularity of resection therapy for pulmonary tuberculosis and the resectional surgery and thoracoplasty are the standard method of surgical procedure in the treatment of pulmonary tuberculosis. However in some cases of far advanced pulmonary tuberculosis, the need for another surgical methods arise when standard method is not indicated under the consideration of poor pulmonary function or operative and postoperative complications such as bronchial fistula. The ligation and division of bronchus draining the involved part of the lung is one of the applicable method among the another surgical procedures. The authors experienced one case of far advanced pulmonary tuberculosis who had a huge cavity in the right upper lobe and a small cavity in the superior segment accomanying with several nodular densities in the basal segment and contralateral left lung field, and treated with right upper lobectomy, ligation and division of the superior segmental bronchus and concomitant rib-resectional thoracoplasty in order to prevent postoperative bronchial fistula and to preserve maximal lung function. The postoperative course was smooth without complication regarding to bronchial ligation and division technique and the general condition has been excellent without symptoms. The postoperative sputum examination for AFB on smear and culture has been negative during the 11 month period of follow up, and X-ray of the chest including tomography demonstrated no evidence of residual cavity indicating succesful collapse of cavity.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.65
• /
• pp.65-73
• /
• 2001

In this study, psychophysiological stress was quantitatively evaluated at various car interior noise levels by using Electroencephalogram(EEG). An experiment was performed to investigate the most comfortable range of noise level during simulated driving condition. Twelve healthy volunteers participated in the experiment. They were asked to operate the driving simulator while six levels of interior noise were given, such as 45dB(A), 50dB(A), 55dB(A), 60dB(A), 70dB(A), 80dB(A), and maximal subjective noise level. EEG signals were recorded for 60 seconds in each noise level. The power spectral analysis was performed to analyze EEG signal. At the same time, psychological stress was also measured subjectively by using a magnitude estimation method. The results showed that subjective stress and EEG spectrum indicated a statistically significant difference between noise levels. In particular, high level noise produced an increase in beta power at temporal(T3, T4) areas. It was also found that beta activity was highly correlated with subjective perception of discomfort, and subjects responded to car interior noise as arousing or negative stimuli. Moreover, beta power remained stable above 70dB(A), whereas subjective discomfort continued to increase even above 70dB(A) We concluded that brain waves could provide psychophysiological information of drivers emotional reaction to car interior noise. Thus, EEG parameters could be a new measure to determine optimal noise level in ergonomic workplace design after further verification in various experimental conditions.

• Korean Journal of Applied Biomechanics
• /
• v.32 no.4
• /
• pp.121-127
• /
• 2022

Objective: The purpose of this study was to investigate potential effects of transcranial direct current stimulation (tDCS) on bimanual force control capabilities in healthy young adults. Method: Eighteen right-handed healthy young adults (10 females and 8 males; age: 23.55 ± 3.56 yrs) participated in this crossover design study. All participants were randomly allocated to both active-tDCS and sham-tDCS conditions, respectively. While receiving 20 min of active- or sham-tDCS interventions, all participants performed bimanual isometric force control tasks at four submaximal targeted force levels (i.e., 5%, 10%, 15, and 20% of maximal voluntary contraction: MVC). To compare bimanual force control capabilities including force accuracy, variability, and regularity between active-tDCS and sham-tDCS conditions, we conducted two-way repeated measures ANOVAs (2 × 4; tDCS condition × Force levels). Results: We found no significant difference in baseline MVC between active-tDCS and sham-tDCS conditions. Moreover, our findings revealed that providing bilateral tDCS including anodal tDCS on left primary motor cortex (M1) and cathodal on right M1 while conducting bimanual force control trials significantly decreased force variability and regularity at 5%MVC. Conclusion: These findings suggest that providing bilateral tDCS on M1 areas may improve bimanual force control capabilities at a relatively low targeted force level.

• Journal of the Korean Society of Food Culture
• /
• v.24 no.3
• /
• pp.308-314
• /
• 2009

In this study, we examined the composition of catechins, theaflavins and alkaloids in leaves during processing to fermented black tea, which is produced by withering, roll breaking, and fermentation of Korean Yabukida tea plant. In addition, we determined the optimal conditions for the production of fermented black tea. The average moisture content in fresh leaves was 70.85%, which dropped to 3.07% in fermented black tea at the last stage of production. When the leaves were analyzed by HPLC, seven types of catechins, four types of theaflavins and three types of alkaloids were identified. The levels of catechins, theaflavins, and alkaloids were then evaluated after being processed into fermented tea. From these experiments, we found that the level of theaflavins, which determines the property of the tea, increased during fermentation. This effect resulted from the change in EGCG, ECG, EGC, EC during the process of fermentation. We also found that the maximal amount of theaflavins was created after 1-2 hours of fermentation. Thus, our results imply that the best condition for producing fermented black tea would be to ferment for 1-2 hours.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.157-162
• /
• 2009

In this paper, the density, viscosity and solubility are measured to know the physical properties of dye. By changing the concentration of dye solution, the density change of the dye solution was very small and the viscosity of the dye solution was increased. Also, by changing the temperature of dye solution, the density change of the dye solution was increased but the viscosity of the dye solution was decreased. Solubility of dye conducts under the changing the salt and concentration of dye. In 20 wt% of dye and 15 wt% KCl, the amount of dye crystal is maximal. Also, batch salting-out experiments were performed with various conditions to know the optimal operating conditions of dye crystal. Under the various experiments, optimal operating condition was found based on amount of dye; added 15 wt% KCl, $25^{\circ}C$ temperature, 100 RPM, added at once.

• Physical Therapy Korea
• /
• v.27 no.4
• /
• pp.227-232
• /
• 2020

Background: Hallux valgus (HV) is a foot deformity developed by mediolateral deviation of the first metatarsophalangeal joint. Although various foot-toe orthoses were used to correct the HV angle, verification of the effects of kinetics variables such as ground reaction force (GRF) through three-dimensional (3D) gait analysis according to the various type of orthoses for HV is insufficient. Objects: This study aimed to investigate the effect of soft and hard types of foot and toe orthoses to correct HV deformity on the GRF in individuals with HV using 3D motion analysis system during walking. Methods: Twenty-six subjects participated in the experiment. Participants had HV angle of more than 15° in both feet. Two force platforms were used to obtain 3D GRF data for both feet and a 3D motion capture system with six infrared cameras was used to measure exact stance phase point such as heel strike or toe off period. Total walk trials of each participant were 8 to 10, the walkway length was 6 m. Two-way repeated measures ANOVA was used to determine the effects of each orthosis condition on the various GRF values. Results: The late anteroposterior maximal force and a first vertical peak force of the GRF showed that the hard type orthosis condition significantly increased GRF compared to the other orthosis conditions (p < 0.05). Conclusion: There were significant effects in GRF values when wearing the hard type foot orthosis. However, the hard type foot orthosis was uncomfortable to wear during walking. Therefore, it is necessary to develop a new foot-toe orthosis that can compensate for these disadvantages.