• Computers and Concrete
• /
• v.29 no.6
• /
• pp.375-391
• /
• 2022

This paper examined the impact of the cross-sectional structure on the structural results under different loading conditions of reinforced concrete (RC) members' management limited in Carbon Fiber Reinforced Polymers (CFRP). The mechanical properties of CFRC was investigated, then, totally 32 samples were examined. Test parameters included the cross-sectional shape as square, rectangular and circular with two various aspect rates and loading statues. The loading involved concentrated loading, eccentric loading with a ratio of 0.46 to 0.6 and pure bending. The results of the test revealed that the CFRP increased ductility and load during concentrated processing. A cross sectional shape from 23 to 44 percent was increased in load capacity and from 250 to 350 percent increase in axial deformation in rectangular and circular sections respectively, affecting greatly the accomplishment of load capacity and ductility of the concentrated members. Two Artificial Intelligence Models as Extreme Learning Machine (ELM) and Particle Swarm Optimization (PSO) were used to estimating the tensile and flexural strength of specimen. On the basis of the performance from RMSE and RSQR, C-Shape CFRC was greater tensile and flexural strength than any other FRP composite design. Because of the mechanical anchorage into the matrix, C-shaped CFRCC was noted to have greater fiber-matrix interfacial adhesive strength. However, with the increase of the aspect ratio and fiber volume fraction, the compressive strength of CFRCC was reduced. This possibly was due to the fact that during the blending of each fiber, the volume of air input was increased. In addition, by adding silica fumed to composites, the tensile and flexural strength of CFRCC is greatly improved.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.5
• /
• pp.313-325
• /
• 2022

Recently around the world, coastal erosion is paying attention as a social issue. Various constructions using low-crested and submerged structures are being performed to deal with the problems. In addition, a prediction study was researched using machine learning techniques to determine the wave attenuation characteristics of low crested structure to develop prediction matrix for wave attenuation coefficient prediction matrix consisting of weights and biases for ease access of engineers. In this study, a deep neural network model was constructed to predict the wave height transmission rate of low crested structures using Tensor flow, an open source platform. The neural network model shows a reliable prediction performance and is expected to be applied to a wide range of practical application in the field of coastal engineering. As a result of predicting the wave height transmission coefficient of the low crested structure depends on various input variable combinations, the combination of 5 condition showed relatively high accuracy with a small number of input variables defined as 0.961. In terms of the time cost of the model, it is considered that the method using the combination 5 conditions can be a good alternative. As a result of predicting the wave transmission rate of the trained deep neural network model, MSE was 1.3×10^-3, I was 0.995, SI was 0.078, and I was 0.979, which have very good prediction accuracy. It is judged that the proposed model can be used as a design tool by engineers and scientists to predict the wave transmission coefficient behind the low crested structure.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.6
• /
• pp.1-12
• /
• 2024

Deep learning with faster and more accurate results requires large amounts of storage space and large computations. Accordingly, many studies are using hardware accelerators for quick and accurate calculations. However, the performance bottleneck is due to data movement between the hardware accelerators and the CPU. In this paper, we propose a data prefetch strategy that can efficiently reduce such operational bottlenecks. The core idea of the data prefetch strategy is to predict the data needed for the next task and upload it to local memory while the hardware accelerator (Matrix Multiplication Unit, MMU) performs a task. This strategy can be enhanced by using a dual buffer to perform read and write operations simultaneously. This reduces latency and execution time of data transfer. Through simulations, we demonstrate a 24% improvement in the performance of hardware accelerators by maximizing parallel processing with dual buffers and bottlenecks between memories with data prefetch.

• Journal of Environmental Impact Assessment
• /
• v.29 no.5
• /
• pp.377-390
• /
• 2020

URBAN ECOLOGICAL MAPS must be created by local governments by NATURAL ENVIRONMENT CONSERVATION ACT, and the maps are generally called biotope map. So far, biotope maps study was a tendency to focus on the type of vegetation, naturalness, land use, landscape ecology theories. However, biotope related studies have not reflected the concept of animal habitat, which is a component of biotope, and that is the limitation of biotope map research. This study suggest a methodology to predict potential habitats for fauna using machine learning to quantify habitat values. The potential habitats of fauna were predicted by spatial statistics using machine learning, and the results were converted into species richness. For biotope type assessments, we classified biotope values into vegetation value and habitat value and evaluated them using a matrix for value summation. The vegetation value was divided into 5 stages based on vegetation nature and land use, and the habitat value was classified into five stages by predicting the species richness predicted by machine learning. This is meaningful because our research can positively reflect the results of field surveys of fauna that were negatively reflected in the evaluation of biotope types in the past. Therefore, in the future, if the biotope map manual is revised, our methodology should be applied.

• Journal of The Korean Association of Information Education
• /
• v.5 no.3
• /
• pp.415-431
• /
• 2001

Recently, the biggest interest in education, education using ICT(Information and Communication Technology) is being emphasized excessively and only the practical side is being embossed on the research about it, so it is causing worry that it is inclined to technical use. In this study, we tried to prepare the strategy for efficient use of ICT in search of theoretical level on use of ICT as an alternative plan for these problems. First, we defined the concept of efficient use of ICT and fixed high thinking of human as basic authority cited for deduction of strategy and analyzed Integrated Thinking Model of Iowa State Dept. of Education. We categorized synthetic thinking for efficient use of ICT through these works. In addition, we classified ICT for efficient use into software area, hardware area, and use skill area, and observed each concepts and interrelationship. And we argued 'Decision Authority of Relation between Thinking Area and ICT Area' to examine relation between synthetic thinking category and each area of ICT, and we established concretization of that, 'Analysis Matrix for Deduction of ICE-EUS'. We tried to guarantee the propriety of deduction process and the clearness of deduction result through this works. Through this process we finally deduct the ICT-EUS(Efficient-Use Strategy of ICT) about learning resources, learning tools, tutee, searching, communication, production and presentation of ICT area. ICT-EUS is expected to provide possibility of being able to enhance the efficiency and effectiveness of achievement of learning goals through cognitive analysis about learning resources, tools and use skills beyond simple use of ICT.

• Communications of Mathematical Education
• /
• v.29 no.3
• /
• pp.465-489
• /
• 2015

The purpose of this study is to suggest implications for the development and revision of future teaching materials for mathematically gifted students by using network text analysis of secondary mathematics materials. Subjects of the analysis were learning goals of 110 teaching materials in a gifted education center in science attached to a university from 2002 to 2014. In analysing the frequency of the texts that appeared in the learning goals, key words were selected. A co-occurrence matrix of the key words was established, and a basic information of network, centrality, centralization, component, and k-core were deducted. For the analysis, KrKwic, KrTitle, and NetMiner4.0 programs were used, respectively. The results of this study were as follows. First, there was a pivot of the network formed with core hubs including 'diversity', 'understanding' 'concept' 'method', 'application', 'connection' 'problem solving', 'basic', 'real life', and 'thinking ability' in the whole network from 2002 to 2014. In addition, knowledge aspects were well reflected in teaching materials based on the centralization analysis. Second, network text analysis based on the three periods of the Mater Plan for the promotion of gifted education was conducted. As a result, a network was built up with 'understanding', and there were strong ties among 'question', 'answer', and 'problem solving' regardless of the periods. On the contrary, the centrality analysis showed that 'communication', 'discovery', and 'proof' only appeared in the first, second, and third period of Master Plan, respectively. Therefore, the results of this study suggest that affective aspects and activities with high cognitive process should be accompanied, and learning goals' mannerism and ahistoricism be prevented in developing and revising teaching materials.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.3
• /
• pp.210-218
• /
• 2002

This paper proposes an efficient separation method of the composite images by using independent component analysis(ICA) based on neural networks of the approximate learning algorithm. The Proposed learning algorithm is the fixed point(FP) algorithm based on Secant method which can be approximately computed by only the values of function for estimating the root of objective function for optimizing entropy. The secant method is an alternative of the Newton method which is essential to differentiate the function for estimating the root. It can achieve a superior property of the FP algorithm for ICA due to simplify the composite computation of differential process. The proposed algorithm has been applied to the composite signals and image generated by random mixing matrix in the 4 signal of 500-sample and the 10 images of $512{\times}512-pixel$, respectively The simulation results show that the proposed algorithm has better performance of the learning speed and the separation than those using the conventional algorithm based method. It also solved the training performances depending on initial points setting and the nonrealistic learning time for separating the large size image by using the conventional algorithm.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.27-35
• /
• 2023

In this paper, we propose a process of increasing productivity by applying a deep learning-based defect detection and classification system to the prepreg fiber manufacturing process, which is in high demand in the field of producing composite materials. In order to apply it to toe prepreg manufacturing equipment that requires a solution due to the occurrence of a large amount of defects in various conditions, the optimal environment was first established by selecting cameras and lights necessary for defect detection and classification model production. In addition, data necessary for the production of multiple classification models were collected and labeled according to normal and defective conditions. The multi-classification model is made based on CNN and applies pre-learning models such as VGGNet, MobileNet, ResNet, etc. to compare performance and identify improvement directions with accuracy and loss graphs. Data augmentation and dropout techniques were applied to identify and improve overfitting problems as major problems. In order to evaluate the performance of the model, a performance evaluation was conducted using the confusion matrix as a performance indicator, and the performance of more than 99% was confirmed. In addition, it checks the classification results for images acquired in real time by applying them to the actual process to check whether the discrimination values are accurately derived.

• Journal of Biosystems Engineering
• /
• v.37 no.4
• /
• pp.271-278
• /
• 2012

Worldwide trends in animal welfare have resulted in an increased interest in individual management of sows housed in groups within hog barns. Estrus detection has been shown to be one of the greatest determinants of sow productivity. Purpose: We conducted this study to develop a method that can automatically detect the estrus state of a sow by selecting optimal texture parameters from images of a sow's pudendum and by optimizing the number of neurons in the hidden layer of an artificial neural network. Methods: Texture parameters were analyzed according to changes in a sow's pudendum in estrus such as mucus secretion and expansion. Of the texture parameters, eight gray level co-occurrence matrix (GLCM) parameters were used for image analysis. The image states were classified into ten grades for each GLCM parameter, and an artificial neural network was formed using the values for each grade as inputs to discriminate the estrus state of sows. The number of hidden layer neurons in the artificial neural network is an important parameter in neural network design. Therefore, we determined the optimal number of hidden layer units using a trial and error method while increasing the number of neurons. Results: Fifteen hidden layers were determined to be optimal for use in the artificial neural network designed in this study. Thirty images of 10 sows were used for learning, and then 30 different images of 10 sows were used for verification. Conclusions: For learning, the back propagation neural network (BPN) algorithm was used to successful estimate six texture parameters (homogeneity, angular second moment, energy, maximum probability, entropy, and GLCM correlation). Based on the verification results, homogeneity was determined to be the most important texture parameter, and resulted in an estrus detection rate of 70%.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.1
• /
• pp.29-40
• /
• 2007

In this study, current status of technology and realities of usage on wireless Internet for educational applications were examined, and based on related studies and case analysis, 'Matrix OX Quiz' that can be applied at present time was designed and built. Main characteristics of this system are as below: Firstly, an attempt was made to achieve educational effect by offering educational contents that are suitable for wireless Internet era, breaking away form limitations on time and space with previous wired Internet. Secondly, mobile phone was selected as the wireless Internet terminal considering the current wireless Internet usage environment and technology, and improved convenience by supporting WAP form Markup language used by SK telecommunications with the most enrollment at present. Thirdly, self-directed learning capability of students can be improved through lessons utilizing wireless Internet. Especially, responsibilities for teaming can be increased through lessons utilizing wireless Internet, and abilities needed for solving immediate problems can be developed. Therefore, the educational contents built in this study should have sufficient educational effects if wireless Internet becomes widely spread and most students can easily use it in near future.