• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.224-227
• /
• 1998

Linear motors are increasingly employed as direct actuators replacing the more conventional systems composed by a rotating motor and a mechanical device. Linear DC motor is useful in a high speed and high accuracy positioning system with a feedback controller. Because of these advantages, linear DC motors have already been used as motors of pen recorders and magnetic disk storage devices, these are moving coil type linear DC motors as these movers are light. Moving magnet type linear DC motor has advantages at long stroke motors because its mover's feeding wires for driving is not necessary. This paper is concerned with the analysis of linear DC motor that is moving magnet type with unipolar. In order to analyze the dynamic behaviour a mathematical model based on a simplified field analysis developed. A two dimensional finite element field solution is employed in order to illustrate the effect of yoke saturation and motor performance. It is deduced the relation between the limit value of the thrust of the linear DC motor and the dimension of the yokes.

• 대한기계학회논문집B
• /
• 제23권7호
• /
• pp.841-855
• /
• 1999

In the present work, the effect of a flow maldistribution on the thermal and conversion response of 8 monolith catalytic converter is Investigated. To achieve this goal, a combined chemical reaction and multi-dimensional fluid dynamic mathematical model has been developed. The present results show that flow uniformity within the monolith brick has 8 great impact on light-off performance of the catalytic converter. In the case of lower flow uniformity, large portions of the monolith remain cold due to locally concentrated high velocities and CO, HC are unconverted during warm-up period, which loads to retardation of light-off. It has been also found that the heat-up pattern of the monolith ill similar to the flow distribution profile, In the early stage of the reaction. It may be concluded that flow maldistribution can cause a significant retardation of the light-off and hence can eventually worsen tho conversion efficiency of automotive catalytic converter.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1474-1482
• /
• 2018

As an essential means of generator voltage regulation, excitation control plays an important role in controlling the stability of the power system. Therefore, the reasonable design of an excitation controller can help improve the system stability. In order to raise the robustness of the generator exciting system under outside interference and parametric perturbation and eliminate chattering in the sliding mode control, this paper presents a generator excitation control based on the quasi-sliding mode pseudo-variable structure control. A mathematical model of the synchronous generator is established by selecting its power, speed and voltage deviation as state variables. Then, according to the existing conditions of the quasi-sliding mode, a quasi-sliding mode pseudo-variable structure controller is designed, and the parameters of the controller are obtained with the method of pole configuration. Simulations show that compared with the existing methods, the proposed method is not only useful for accurate voltage regulation, but also beneficial to improving the robustness of the system at a time when perturbance happens in the system.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.184-198
• /
• 2020

Decisions of the design speed, MCR, and engine capacity have been empirically made by assuming the value termed the sea margin. Due to ambiguity regarding the effect of some factors on the sea margin, the value has been commonly decided based on experience. To evaluate the value from a new viewpoint, it is necessary to construct an approach to estimate the sea margin through an objective procedure based on a physical and mathematical model. In this paper, a framework to estimate the actual sea margin of an LNGC based on the maneuvering equations of motion is suggested by considering the hull, propeller, rudder, and given sea route under wind and waves. The fouling effect is additionally quantified as the increase of total resistance by considering the re-docking period. The operation data is reviewed to amend the increase of the total resistance considering the speed loss of a ship. Finally, the factor of how much the resistance increases due to fouling is newly obtained for the vessel. Based on the comparison of the estimated sea margin with the empirical range of the sea margin, the constructed framework is regarded as feasible.

• Computers and Concrete
• /
• 제29권 5호
• /
• pp.323-334
• /
• 2022

In order to study the axial compression performance of basalt-fiber reinforced recycled concrete (BFRRC) filled circular steel tubular short columns, the axial compression performance tests of seven short column specimens were conducted to observe the mechanical whole-process and failure mode of the specimens, the load-displacement curves and the load-strain curves of the specimens were obtained, the influence of design parameters on the axial compression performance of BFRRC filled circular steel tubular short columns was analyzed, and a practical mathematical model of stiffness degradation and a feasible stress-strain curve equation for the whole process were suggested. The results show that under the axial compression, the steel tube buckled and the core BFRRC was crushed. The load-axial deformation curves of all specimens show a longer deformation flow amplitude. Compared with the recycled coarse aggregate (RCA) replacement ratio and the basalt fiber dosage, the BFRRC strength has a great influence on the peak bearing capacity of the specimen. The RCA replacement ratio and the BFRRC strength are detrimental to ductility, whereas the basalt fiber dosage is beneficial to ductility.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.88-95
• /
• 2022

Vacuum simulation is associated with the prediction and calculation of how materials, pumps and systems will perform using mathematical equations. In this investigation, three different high vacuum systems were simulated and estimated with each vacuum characteristics by VacTran simulator. In each of modelled vacuum systems, selection of gas loads into vessel, combination of rough and high vacuum pumps and dimension of conductance elements were proposed as system variables. In pump station model, the pumping speed to pressures by the combination of root pump was analyzed under the variations of vessel volume. In this study, the effects of outgassing dependent on vessel materials was also simulated and aluminum vessel was estimated to optimum materials. It was obtained from the modelling with diffusion pump that the diameter, length of 50×250[mm]roughing line was characterized as optimum variables to reach the ultimate pressure of 10E-7[torr]. Optimum design factors for vacuum characteristics of modelled vacuum system were achieved by VacTran simulator. Feasibility of VacTran as vacuum simulator was verified and applications of VacTran in high tech process expected to be increased.

• Advances in nano research
• /
• 제14권5호
• /
• pp.475-493
• /
• 2023

In the context of nonclassical nonlocal strain gradient elasticity, this article studies the free and forced responses of functionally graded material (FGM) porous nanoplates exposed to thermal and magnetic fields under a moving load. The developed mathematical model includes shear deformation, size-scale, miscorstructure influences in the framework of higher order shear deformation theory (HSDT) and nonlocal strain gradient theory (NSGT), respectively. To explore the porosity effect, the study considers four different porosity models across the thickness: uniform, symmetrical, asymmetric bottom, and asymmetric top distributions. The system of quations of motion of the FGM porous nanoplate, including the effects of thermal load, Lorentz force, due to the magnetic field and moving load, are derived using the Hamilton's principle, and then solved analytically by employing the Navier method. For the free and forced responses of the nanoplate, the effects of nonlocal elasticity, strain gradient elasticity, temperature rise, magnetic field intensity, porosity volume fraction, and porosity distribution are analyzed. It is found that the forced vibrations of FGM porous nanoplates under thermal and live loads can be damped by applying a directed magnetic field.

• 항공우주시스템공학회지
• /
• 제12권1호
• /
• pp.57-67
• /
• 2018

APD (Antenna Pointing Driver)는 차세대 중형위성에 탑재되는 위성 데이터 전송용 2축 짐벌식 X-밴드 안테나를 구동하기 위한 전장품이다. 전장품에 탑재된 EEE (Electrical, Electronic and Electromechanical) 소자의 열소산은 소자의 효율과 수명, 신뢰도에 직접적으로 영향을 미치게 되며, 종국에는 소자 자체의 파손으로 위성 전체 시스템의 실패를 초래할 수 있다. 임무기간동안 전장품의 신뢰성을 보장하기 위해 EEE 소자의 접합온도는 중요한 설계요소가 되며, 허용범위 내에서 확보되어야 한다. 따라서 사전에 소자의 감쇄비를 고려한 열해석이 반드시 수행되어야하며, 이를 위해 적절한 열해석모델을 구축하여야한다. 본 논문에서는 APD의 온도 요구조건 만족여부를 확인하기 위해 열설계 및 열해석을 수행하였으며, 이와 더불어 각 모델링 기법에 따른 열해석모델의 유효성을 비교, 분석하였다.

• 한국해안·해양공학회논문집
• /
• 제26권5호
• /
• pp.267-277
• /
• 2014

본 연구에서는 기존의 무공케이슨 방파제에 대하여 개발된 성능설계법을 유공케이슨 방파제로 확장하여 적용하였다. 확장된 계산 모형은 한국해양연구소에서 수행한 수리 실험결과와 비교하여 검증하였다. 케이슨의 안정성을 평가하기 위하여 방파제 수명 동안의 누적활동량의 평균으로 정의되는 기대활동량과 누적활동량이 일정한 허용치를 초과할 확률을 산정하여 케이슨의 안정성 평가에 사용하였다. 기대활동량과 초과확률 모두 수심이 감소함에 따라 쇄파대 안쪽에서는 증가하며, 바깥쪽에서는 감소하는 경향을 보였다. 또한, 안전율에 기초한 결정론적 설계법의 결과와 비교해 보았을 때, 성능설계법의 설계기준에 따라 경제성이 달라지는 것으로 나타났다. 허용기대활동량과 초과확률이 극한 한계상태를 만족할 경우 쇄파대 바깥쪽에서는 성능설계법이 결정론적 설계법보다 비경제적인 것으로 나타났으며, 쇄파대 안쪽에서는 비슷한 경제성을 가지는 것으로 나타났다. 그러나, 복구가능한계상태를 만족할 경우 성능설계법이 결정론적 설계법보다 더 경제적인 것으로 평가되었다.

• 대한기계학회논문집A
• /
• 제40권6호
• /
• pp.587-593
• /
• 2016

대체모델을 이용한 신뢰성기반 최적설계에서 최적해와 신뢰도의 정확성은 제한조건경계의 대체모델의 정확도에 영향을 받는다. 기존 제안된 제한조건경계 샘플링 기법은 제한조건경계에 실험점을 생성하여 이러한 정확성을 높일 수 있었다. 하지만, 제한조건경계 샘플링 기법은 최적해와 먼 부근의 제한조건경계에도 불필요한 실험점을 생성하여 과도한 계산비용이 발생한다. 본 논문에서는 크리깅 대체모델의 통계적 정보를 이용하여 최적해 근처의 제한조건경계에 실험점을 생성하는 효율적인 제한조건경계 샘플링 기법을 제안한다. 제안한 기법의 효율성과 정확성은 수학예제를 통하여 확인한다.