• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권2호
• /
• pp.211-219
• /
• 2013

기후가 무덥고 습해지면서 제습기의 사용이 증가하고 있지만, 제습기의 에너지 소비가 크고, 전기제품의 사용 증가로 인하여 전력이 부족하기에 제습기의 사용이 보편화되지 못 하고 있다. 제습기술은 오랜 시간 동안 최적화된 기술로써 기존기술을 바탕으로 에너지 효율을 높이는 데에는 한계에 도달했다고 볼 수 있다. 하지만, 높은 에너지 효율, 즉 소비전력이 낮으면서 제습성능이 높은 제습기의 개발 요구가 계속되고 있고, 그 해답은 자연모사기술에서 찾을 수 있다. 이 논문에서는 상용품인 제습기의 소비전력을 분석하고 자연에서 무동력으로 공기 중의 수분을 포집하는 딱정벌레 등껍질이나 식물들로부터 영감을 얻어 에너지 효율을 증가시킬 수 있는 아이디어를 살펴보고자 한다.

• 한국물환경학회지
• /
• 제20권3호
• /
• pp.290-295
• /
• 2004

In this study, ozone was adopted for the reduction and stabilization of waste sludge from the municipal sewage treatment plant. The waste sludge used in the experiments was primary sludge, excess sludge and a mixture of the two. The sludge cells and flocs were disrupted by ozonation resulting in the reduction of TSS and VSS concentrations. In the case of the primary sludge with a concentration of 20 gTS/L, the TSS and VSS concentrations were reduced 28%, 33% and the TCOD concentration was reduced 20% respectively. The consumption of ozone was $0.18gO_3/gSS$. In the case of the excess sludge with a concentration of 7.5 gTS/L, the TSS and VSS concentrations were reduced 37%, 41%, and the TCOD concentration was reduced 19% respectively. The consumption of ozone was $0.33gO_3/gSS$. In the case of the mixed sludge of 9.3 gTS/L, the TSS and VSS concentrations were reduced by 45%, 53%, and the TCOD was reduced 26% respectively. The desirable consumption of ozone was $0.27gO_3/gSS$. As ozonation proceeded, the level of SCOD increased due to the release of intracellular materials. However TCOD was reduced due to mineralization resulting from the transformation of organic materials to inorganic materials.

• 한국가정과교육학회지
• /
• 제32권1호
• /
• pp.145-165
• /
• 2020

본 연구는 가정교과 수업 '지속가능한 소비' 단원에 디자인씽킹 프로세스를 적용하여 10차시의 교수·학습자료를 개발하였으며, 수업에서 나타나는 학습 경험을 탐색하였다. 디자인씽킹을 적용한 수업 후, 고등학교 1학년 10개 학급의 남녀 학생 276명의 수업성찰일지와 10명의 심층면담 결과를 분석하였다. 그 결과 첫째, 스탠포드 대학 d-school의 디자인씽킹 프로세스의 다섯 단계를 적용하여 '지속가능한 소비 실천 책 만들기 프로젝트' 교수·학습자료를 개발하였다. 둘째, 디자인씽킹을 적용한 지속가능한 소비 수업을 통해 학생들의 긍정적인 학습경험을 확인하였다. 학생들은 현실문제와 공감하는 경험을 통해 반성하고 성찰하는 계기가 되었으며, 아이디어 구상 및 프로토타입 제작 과정을 통하여 문제해결능력이 향상되는 경험을 하였다. 셋째, 디자인씽킹을 적용한 지속가능한 소비 수업의 어려운 점은 구성원 전체 의견의 합의에 도달하는 과정이 힘들었으며, 아이디어의 구상 및 프로토타입 구현에 어려움을 느끼는 것으로 나타났다. 본 연구의 학습경험을 바탕으로 디자인씽킹을 적용한 다양한 주제의 가정과 수업을 개발해 적용할 필요가 있으며, 디자인씽킹을 적용한 가정과 수업의 효과에 대해 검증하는 연구가 필요함을 제언하는 바이다.

• 한국가구학회지
• /
• 제24권1호
• /
• pp.51-59
• /
• 2013

In this study, a dwelling type of Korea and Japan was compared, and consumption rate of domestic timber and its usage was also investigated. In Korea, dwelling type of apartment which constructed by iron and steel-concrete is main shared, but a detached house which is shared at 60% of dwelling type of Japan is mainly constructed by timber. And the rate of the consumption of domestic wood in Japan is 73%. In Japan, there is an effort to substitute imported wood to domestic timber through the promotion of using of domestic timber. Whereas the needs on using of domestic timber gradually emerged. So, the legal about sustainable use of wood is approved by the National Assembly on May 2012. There is not active movement in the aspect of using of domestic timber yet. These causes to the geographical and environmental characteristics, but industry, policy, and the difference of recognize on domestic timber utilization is thought to do greater influence. Hence, it is recommended to make a portfolio of both balanced domestic timber usage and the change of awareness of people by referring to the example of Japan.

• 설비공학논문집
• /
• 제22권12호
• /
• pp.828-836
• /
• 2010

The drying is a process that involves coupled and simultaneous heat and mass transfer. When a wet solid is subjected to thermal drying, two processes occur simultaneously. Drying is classified according to heat transfer characteristics in terms of conduction, convection and radiation. In thermal drying, radiation is easier to control than conduction and convection drying and involves a relatively simple structure. In this study, we measured energy consumption, surface hardness of paint and surface gloss with variation of surface temperature of drying materials and drying time. Drying characteristics and energy consumption between heating panels and hot air heating have been presented. The present study shows that a dryer using heating panels is more effective than a hot air dryer from the viewpoint of energy conservation. The hot air dryer, however, was not optimized and more studies on various parameters related to drying will need to be investigated for definite comparison of drying characteristics of the dryers. The result, even if limited, would present the effective availability of paint drying.

• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.334-339
• /
• 2012

A study on electrical and electronic equipment will occur in the atmosphere, which is essential to cut the power to prevent the waste of power by power measurement technology development and to develop the technology to do this operation is the main core of standby power to detect and block it and return the configured for software and hardware, while the actual construction to ensure stability through field testing and debugging of problems improved accordingly, as well as ease of installation and so it could be done while the test. In addition, in terms of basic hardware switching of standby power when blocking, reducing stress and ensure stable operation and circuit design, power off and back to ensure stable operation even when a protection circuit is applied.

• 한국자동차공학회논문집
• /
• 제20권4호
• /
• pp.39-45
• /
• 2012

Today gasoline engines for vehicular application are not only faced with stringent emission regulation but also with increasing requirements to better fuel economy, while guaranteeing power density. The spray-guided type gasoline direct injection (GDI) engine has an advantage of improved thermal efficiency and lower harmful emissions. Centrally mounted high pressure injector and adjacent spark plug allow stable lean combustion due to the flexible mixture stratification. In the present study, the performance and emissions characteristics of developed spray-guided type GDI combustion system were evaluated at various excess air ratio conditions. The specific fuel consumption and nitrogen oxides ($NO_x$) emissions were reduced due to the achievement of stable lean combustion under flammability limit. Multiple injection strategy was not helpful to improve fuel consumption while further reduction of $NO_x$ emissions was possible.

• 한국정밀공학회지
• /
• 제31권12호
• /
• pp.1107-1113
• /
• 2014

In this article, the megasonic cleaning system for cleaning micro/nano particles from flat panel display (FPD) surfaces was developed. A piezoelectric actuator and a waveguide were designed by finite element method (FEM) analysis. The calculated peak frequency value of the quartz waveguide was 1002 kHz, which agreed well with the measured value of 1003 kHz. The average acoustic pressure of the megasonic cleaning system was 43.1 kPa, which is three times greater than that of the conventional type of 13.9 kPa. Particle removal efficiency (PRE) tests were performed, and the cleaning efficiency of the developed system was proven to be 99%. The power consumption of the developed system was 64% lower than that of the commercial system. These results show that the developed megasonic cleaning system can be an effective solution in particle removing from FPD substrate with higher energy efficiency and lower chemical and ultra pure water (UPW) consumption.

• 한국응용과학기술학회지
• /
• 제11권2호
• /
• pp.39-54
• /
• 1994

I am going to survey major topics relating to the title by analyzing the following statistical data. 1 : Global trend of production and import of oil and relating materials 2 : Global trend of major oil production 3 : Capacity of Japanese factory for oil production 4 : Situation of mechanical expression based on raw materials 5 : Change of production amounts of Oil products 6 : Oil production of each items 7 : Imported amounts of oil products 8 : Vegetable oil meals, production, import and global trend 9 : Production of mayonnaise, dressing and edible processing oils 10 : Intake of nutrients, supply of lipids, and consumption of oils 11 : Global production of oleochemicals 12 : Sales amount of oleochemicals 13 : Capacities of fatty acid and fatty alcohol factories 14 : Oleochemical production in 1995 15 : Oleochemical procuction in asia 16 : Production of surfactants for industrial use 17 : Sales amount of detergents and washing materials 18 : Production of soap and synthetic detergent in Japan 19 : Consumption of soap. detergent, and synthetic detergent 20: Relation beween synthetic detergent production and popularization 21 : Biodegradability of soft detergent

• 한국대기환경학회지
• /
• 제23권6호
• /
• pp.727-733
• /
• 2007

In this study, a newly developed biotrickling system, combined with a non-thermal plasma reactor, was investigated to effectively treat gaseous contaminants such as VOCs (Volatile Organic Compounds). Three kinds of non-thermal plasmas (NTPs) such as a rod type dielectric barrier discharge (DBD) plasma, a packed bead type DBD plasma and a gliding arc (GA) plasma, were tested and compared in terms of power consumption. The rod type DBD plasma was selected as one for integration with biotrickling system due to its relatively high VOC removal efficiency, low power consumption and low pressure drop. Toluene and xylene as representatives of VOCs were used as test gases. The experiment results showed that the efficiency of biotrickling system was especially very low at the high gas concentration and high flow rate and the removal efficiencies of VOCs were considerably enhanced in the biotrickling system, when the DBD plasma was worked in front of that even at the high gas concentration and high flow rate.