• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.125-130
• /
• 2014

High speed railroad car and high-rise apartment with development of railway technology cause different problems of noise contrary to the previous generation. It is the most efficient noise reduction countermeasure but we studied that is the way on noise propagation with sound proof wall or sound proof tunnel around railroad. But if it were railroad on bridge, additional cost which is more expensive than installing one on the ground is needed. So sound insulation material considering reducing weight of recent soundproof facilities must be selected. It is in this study that predicted and analyzed acoustical and structural effect for noise reduction by installing soundproof tunnel. If it were departmentalized into additional study, could be able to expect noise reduction effect of sound proof tunnel establishment on the bridge.

• 패션비즈니스
• /
• 제7권3호
• /
• pp.60-70
• /
• 2003

Textile scientists have regarded the material appearance of natural fibers, especially that of silk or wool fibers, as the benchmark for reinventing the look and feel of the long term, friendly companion of mankind. The appearances or textures of the materials surrounding us in everyday life have long been interesting topics to many people.from scholars to painters. Even the simplest questions may require careful pondering. Why is the silk fabric so lustrous with subtlety? Recently, appearance models have become increasingly important in textile products. They are needed to model and simulate different models. In this study, the optical characteristics of filament yarns and knitted fabrics were investigated using images taken at various angles and illumination conditions. Then the images were analyzed using some image analysis techniques, such as thresholding and measuring luster blobs. The anisotropic nature of the filamentous specimens was studied based on the images acquired at different incident illumination and observing angles with several alignment positions of the fabric specimens. A few cylindrical models were generated using commercially available software, Rhinoceros, and then on the models, a ray-tracing algorithm based on a software, POV-Ray, was applied to simulate the appearance or lustrous images of the monofilament models.

• Transactions on Electrical and Electronic Materials
• /
• 제16권4호
• /
• pp.201-205
• /
• 2015

This paper dealt with the condensing technology of an LED light source that uses a parabolic reflector to replace a searchlight equipped with a xenon lamp. A ray-tracing simulation was conducted to analyze the influence of the diameter of the reflector and the size of the light source on light condensing. The combination of a parabolic reflector with a diameter of 620 mm and a focal distance of 220 mm, and a 9 mm multi-chip package (MCP) with a luminous flux of 7,000 lm showed the narrowest beam angle. The luminous intensity at the center was measured at 7.7×10⁶ cd. The distance between the light source and the point where the illuminance was 1 lx was calculated to be 2.8 km. The power consumption of the system was 95 W, which is only 9.5% of that of the 1 kW xenon searchlight, and the beam angle was 1.03°. In a site experiment, it was confirmed that the light ray reflected from the LED searchlight proceeds forward without any diffusion because of the narrow beam angle.

• 대한간호학회지
• /
• 제24권2호
• /
• pp.216-225
• /
• 1994

The cost of hospice care should be covered by the insurance system if it is to be promoted in our country and this, in turn, requires a proper method to the estimate of this cost. The purpose of this study was to set up the method to estimate the cost of hospice care. First the cost effectiveness of hospice care were studied. By tracing the activities of hospice nurses for a given period, all the relevant data such as the scope and load of activities as well as the cost were collected. Then these were analysed and compared with the data obtained from hospice and home care. The results showed that the cost of hospice care was the most economic, and indicate its qualification as .1n in-dependent system. The main part of the cost of hospice care was found to be the labor cost which was up to 83% of the total. Therefore a method to estimate the cost should reflect the real labor cost. Several methods have been proposed in the study in terms of unit labor cost, service time, material cost, and the weight of the labor cost. All variables, including the service time surveyed in this study, can easily be translated into numerical values and it would not difficult to estmate the cost of hospice care. Hence by letting the hospice care be insured, hospice care can be expected to function as a good alternative to the present medical system.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.214-219
• /
• 2017

Magnetic separators that clean the fluid stream from impurities, protect the installations in numerous industries. This paper introduces a graphical user interface (GUI) which proposes an optimized coil separating magnetic particles with a radius from 1 up to 500 µm. High gradient magnetic fields are employed in an arbitrary user defined fluidic channel which is made of a nonmetallic material. The effects of coil parameters are studied and adjusted to design an optimum coil with a minimum Ohmic loss. In addition, to design the coil scheme based on the particle movements, a mathematical particle-tracing model within the fluid channels has been utilized. In comparison to conventional magnetic separators, this model is reconfigurable by the user, produces a weaker magnetic field, allows for continuous purifying and is easy to install, with high separation efficiency. The presented GUI is simple to use, where the coil's manufacturing limitations can be specified.

• 한국소음진동공학회논문집
• /
• 제26권6_spc호
• /
• pp.687-696
• /
• 2016

A series of process to design an acoustic lens for underwater imaging is reviewed and the method to evaluate characteristics of the lens is investigated. If the target specification of lens is given, the design process consists of the material selection, evaluation of its properties, lens geometry design, prediction of lens characteristics, manufacturing, and evaluation by measurement. In this study, an actual acoustical lens is made by cutting polymethylpentene block. The characteristics of lens are predicted by the hybrid method, combination of ray tracing and Rayleigh integral. For the direct comparison between the prediction and measurement results, a simulation method based on the equivalent source method is suggested to reflect the actual radiation pattern of transducer used for measurements. Finally, the measurement is conducted in a small water tank to observe the actual characteristics of the manufactured lens.

• 한국전자통신학회논문지
• /
• 제15권3호
• /
• pp.397-404
• /
• 2020

본 논문에서는 선추적법과 전달측정을 통하여, 지면반사파가 우세한 도로 개방환경에서 1, 3, 6 GHz의 전파 감쇄 특성을 분석하였다. 바닥면의 재질과 송신 안테나 높이와 수신안테나의 높이를 변화시키면서 특성을 관찰하였다. 실제 측정은 개방환경에서 10미터 높이에 설치한 지향성 송신 안테나와 1.5미터 높이에 설치한 전방향성 수신 안테나로 수행하였다. 모의실험과 측정 결과의 비교를 통하여 수신기의 최대 감쇄가 발생하는 지점의 변화 현상을 분석하였다. 비롯 넓은 도로 환경의 결과이지만, 본 연구의 결과는 향후 도로 개방환경에서 송신기와 수신기를 배치할 때 원활한 통신을 위하여 활용될 수 있을 것이다.

• 대한토목학회논문집
• /
• 제13권5호
• /
• pp.99-107
• /
• 1993

본 논문에서는 콘크리트 균열 사이의 인장강성 효과를 고려한 임의의 기하하적 형상을 갖는 철근 콘크리트 쉘을 해석하기 위하여 재료비선형 유한요소 프로그램을 작성하였다. 본 논문은 연속적인 컴퓨터 해석으로 탄성, 비탄성 및 극한 범위에서의 철근과 콘크리트의 응력은 물론, 하중-변위 응답과 균열전파를 추적할 수 있었다. 골재억물림과 철근의 다울작용을 포함하는 유효전단계수를 평가하기 위하여 균열상태의 전단유지계수를 도입하였다. 콘크리트는 인장에서는 취성으로 압축에서는 탄소성으로 가정하였다. 콘크리트의 소성거동은 Drucker-Prager 항복기준과 결합유동법칙에 따르는 것으로 가정하였다. 철근은 Von Mises 항복기준으로 가정하였으며 등가의 두께를 가지는 철근층으로 모델화 하였다. 수치해석을 위하여는 증분형접선강성도 방법을 사용하였다. 수치예제를 제시하여 본 연구결과를 Hedgren의 실험 결과와 Lin의 수치해석과 비교하였다.

• 방사성폐기물학회지
• /
• 제20권1호
• /
• pp.43-63
• /
• 2022

The aim of this review is to communicate some essential knowledge of the underlying mechanism of the corrosion of structural containment alloys during molten salt reactor operation in the context of prospective online monitoring in future MSR installations. The formation of metal halide species and the progression of their concentration in the molten salt do reflect containment corrosion, tracing the depletion of alloying metals at the alloy salt interface will assure safe conditions during reactor operation. Even though the progress of alloying metal halides concentrations in the molten salt do strongly understate actual corrosion rates, their prospective 1^st order kinetics followed by near-linearly increase is attributed to homogeneous matrix corrosion. The service life of the structural containment alloy is derived from homogeneous matrix corrosion and near-surface void formation but less so from intergranular cracking (IGC) and pitting corrosion. Online monitoring of corrosion species is of particular interest for molten chloride systems since besides the expected formation of chromium chloride species CrCl₂ and CrCl₃, other metal chloride species such as FeCl₂, FeCl₃, MoCl₂, MnCl₂ and NiCl₂ will form, depending on the selected structural alloy. The metal chloride concentrations should follow, after an incubation period of about 10,000 hours, a linear projection with a positive slope and a steady increase of < 1 ppm per day. During the incubation period, metal concentration show 1^st order kinetics and increasing linearly with time^1/2. Ideally, a linear increase reflects homogeneous matrix corrosion, while a sharp increase in the metal chloride concentration could set a warning flag for potential material failure within the projected service life, e.g. as result of intergranular cracking or pitting corrosion. Continuous monitoring of metal chloride concentrations can therefore provide direct information about the mechanism of the ongoing corrosion scenario and offer valuable information for a timely warning of prospective material failure.

• 한국소프트웨어감정평가학회 논문지
• /
• 제17권2호
• /
• pp.31-38
• /
• 2021

소스코드 감정목적물의 유사성을 판단하는 경우, 양측의 비교대상 소스코드는 컴파일과 실행이 가능 해야 한다. 또한 시스템 소스의 경우에는 하드웨어와의 인터페이스가 일치하는지 확인이 되어야 한다, 그러나 현실적으로 분쟁당사자의 소스코드가 완전하지 않은 상태로 제공되는 경우가 발생하고 있다. 분쟁을 제기하는 측에서는 동작 특성이 자사의 기능과 유사하고, 출력되는 표현과 기능이 유사한 이유로 소스코드의 핵심부분이 유사한 것으로 판단하고, 감정을 요청하고 있다. 분석과정에서 소스코드의 컴파일 오류 발생 시, 감정인은 소스코드의 흐름도를 작성하고, 함수별 코드의 흐름을 추적하는 방법을 적용하게 된다. 그러나 이 방법은 간접적이고, 감정인의 주관적인 판단이 적용되어 유사성 분석결과에 객관성에 대한 다툼이 우려된다. 본 연구에서는 임베디드 시스템에 적용된 소스코드분쟁의 감정사례를 통해 검증되지 않은 소스코드 유사성 도출의 문제점과 개선 방향을 다룬다.