• 한국지역사회생활과학회지
• /
• 제14권3호
• /
• pp.89-98
• /
• 2003

To assess the actual status of businesses selling fermented soybean products, this study surveyed 130 Farmhouse style small size soybean sauce processing sites supported by the Rural Development Administration nationwide. The sex composition of the businesses representatives of 2% male and 98% female showed that a farmhouse soybean processing business is generally operated by rural women as a non-filming business. The percentage of co-worked sites was 71.2 and that of sites with permits was 39.2. The main products were meju, doenjang, and kanjang. Total production volume was found to be 523 tons, 256 tons, and 135 k$\ell$s, respectively. The number of years of experience of the manufacturers of the kanjang and doenjang was found to be 25.7 on average which shows that long-experienced, skilled manufacturers are participating in this project. The traditional measuring unit differed greatly depending on the region. This difference in the measuring unit of soybeans resulted in a large difference in the volume of doenjang and kanjang produced Per Province. For one kg of raw soybeans, the weight of Doenjang produced also varied from 2.14 kg in the Gyeongbuk area to 1.62 kg in Jeju. In the aspect of salt use, 1.75 $\ell$ (translated by volumetric unit 0.704 due) of salt pet kg of meju, in Jeju, was the highest in Korea. Government supervision would be beneficial in the areas of raw material products, standardization of measuring units and production methods, organization and operation of a conference for the different groups of producers, and in construction of a nationwide database.

• 기술혁신연구
• /
• 제14권3호
• /
• pp.209-235
• /
• 2006

Since the end of the cold war, technical tie-up between private corporations and an army in developed countries has increased a lot, and the trend is spreading through developing countries rapidly. To cope with the circumstance actively, the dual use technology program for both private corporations and an army was begun in Korea in 1998. With the program, overlapping investment was resolved and technology transfer was stimulated. And the standardization and information exchange saved considerable national budget and made possible economic profit. Yet, the combination project of 4 ministries and offices showed problems such as loose cooperation and, low industralization record. However, developed countries are out of the mere stage of dual technology development and turn into broad technical tie-up including future prediction, national competitiveness improvement, and the private company's leading participation and they are systemizing them very fast. Korea also set up the national defense reform plan with the blueprint of future military force improvement, budget increase for national defense research, and increased participation of private corporations, and created Defense Acquisition program Administration to support them. The innovation of national defense system brings forward the need to link the private and military innovation. Korea has pursued the fast growth through assimilation, absorption, and improvement of foreign technology. But now, Korea has to focus on self innovation, original technology, parts and material. As this applies to private companies and military equally, it is important to concentrate limited resources for the effective technology cooperation. Considering this, the strategies to activate the dual use technology are program concept and range extension, task-deduction way improvement and future-oriented common task deduction, and promotion system improvement.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제29권4호
• /
• pp.723-743
• /
• 2015

본 연구는 수학학습 상담 시 활용할 사전 진단 검사지를 개발하기 위한 연구이다. 이를 위하여 학생들을 진단하기 위한 발문들을 도출해 내어 검사지를 구성하고, 이에 대한 표준화 작업을 실시하여 초등 5~6학년용과 중등 1~2학년용의 진단 검사지를 제작하였다. 검사지는 총 3부로 나누어, 1부 수학학습심리, 2부 수학학습 방법, 3부 수학학습 개인 성향으로 구성하였다. 수학학습심리는 '수학학습능력 자신감', '수학불안', '수학학습 태도' 요인으로, 수학학습 방법은 '수학학습 자기관리'와 '수학학습 전략' 요인으로, 수학학습 개인 성향은 '수학학습 습관'과 '수학학습 관리 방법', '동기', '성향'을 묻는 문항으로 구성하였다. 이러한 진단 검사지는 학생들의 수학학습 상담을 위한 기초자료로 활용할 수 있다.

• 패션비즈니스
• /
• 제2권4호
• /
• pp.102-111
• /
• 1998

The purpose of this study is to present the basic material for the competitive, high-quality products by analyzing employees' attitude toward their job and some factors which influence the enhancement of productivity, education of workers, and facilities. This project was mainly conducted the conditions of women's wear manufacturing industries in Taegu by interviewing 143 employees in the sewing department. The result of this dissertation can be summarized as follows; 1. When it comes to the division of task in the sewing department, one team is composed of chairpersons (33.5%), assistant members (27.4%) and sub-assistant members (26.6%). The inspection of commodities as well as the enhancement of work on ironing for elaboration was divided as completion (12.6%) and finally the forms of task were made up of design sampling team (49%) and contracting team (51%). 2. Among the needle workers, as many as 60% employees had received technical education, which was by means of being passed down from the predecessors (81.6%). In terms of the period of education, from 2 to 5 years topped the list. The contents of education comprise patterning, sewing (65.2%) and ironing (20.3%). 3. The department of design takes charge of the report on working directions up to 88.2% and the working directions were used by 69.9 % of technicians. The directors of working conditions and methods were chiefs of designing department (37.7%) and those of sewing department (30.8%). The factors of defective goods were low-quality materials (50.0%), the deficiency in skills of workers. In terms of methods for preventing defects, technical education of workers, standardization of task and investment for factory automation were suggested. 4. As for their perception of present work, most of employees (80%) look upon it as a way of earning a living and 11% of them wanted to derive many things from their work. 59.2% of workers were satisfied with the product. When it comes to the incentive system provided by company, 67.0% responsed that it was not bad, and 23.9% evaluated it as 'satisfactory'.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권2호
• /
• pp.117-127
• /
• 2013

In this paper, we studied the correlation between the activation energy($E_a$) of the raw materials and the structural characteristics of the White LED PKGs. The samples used in the study were composed of low power LED 3type and high power LED 5type. To calculate the activation energy($E_a$) of the White LED PKGs conducted three conditions of high temperature operation test based on the Arrhenius model. The number of samples used in the experiment is 10, respectively. The $T_j$ of Conditions and target specifics expressed $T_{j1}$, $T_{j2}$, $T_{j3}$. The activation energy ($E_a$) of the samples was calculated based on the value of the actually measured lifetime. We investigated the correlation between the activation energy ($E_a$) of the raw materials and the structural characteristics of the White LED PKGs. As a result, White LED PKGs activation energy($E_a$) value was confirmed that the material properties affected more than the structural characteristics of the LED PKGs and we found that activation energy of each LED Model has difference. Normally, The activation energy of phosphor of YAG type was indicated from 0.21 to 0.25[eV] and Silicate type was indicated from 0.12 to 0.16[eV]. According to the results, we confirmed that the activation energy of phosphor of YAG type is higher more than The activation energy of phosphor of Silicate type.

• 한국생활과학회지
• /
• 제21권4호
• /
• pp.791-803
• /
• 2012

This study intends to identify applicability of natural dye extracted from Aplysia kurodai, aiming to standardization of Aplysia kurodai natural dyeing through scientific validation by analyzing characteristics of pigment elements to review dyeability, colorfastness and antibacterial activity. Such material as silk fabrics that is animal fiber were used for this purpose, and derived following summarized results. UV/VIS spectrum analysis on the pigment of Aplysia kurodai that was extracted from purple gland showed that maximum absorbtion was near 540 nm. The silk fabric optimal dyeing can be achieved at a temperature of $55^{\circ}C$ with a colorant concentration of 5%. Dyed at $55^{\circ}C$ with interval of 10~90 minutes for identifying dye uptake over time to observed slow increase of dye uptake over time, and equilibrium occurred at 50 minutes. For dye uptake according to pH, while dye uptake was superior in acidity, it decreased rapidly in a base after pH 7. For color changes according to pH variation, it was reddish purple in acidity and was purplish red in a base. For color changes according to mordanting method, more clear color change had been obtained when process with aluminium pre-mordanting than non-mordanting and post-mordanting. The colorfastness to light, perspiration and washing was 1, 4~5, and 3~4 ratings respectively. The silk fabric dyed with Aplysia kurodai demonstrated excellent antimicrobial activity to Staphylococcus aureus and Klebsiella pneumoniae. The Aplysia kurodai can be used as a new colorant for the natural dyeing of silk.

• 대한치과보철학회지
• /
• 제39권1호
• /
• pp.14-24
• /
• 2001

The purpose of this study was to compare the fracture strengths and the fracture patterns of several hybrid-ceramic crowns and metal-ceramic crown. Ten crowns were constructed for each group according to the manufacturer's instruction. Removable template of silicone rubber impression material was used for standardization of each crowns. Each crown was cemented on a metal die with hybrid glass ionomer cement. All crowns cemented were stored in distilled water, $36^{\circ}C$ for 24 hours prior to loading in an universal testing machine. The load was directed at 130 degrees the long axis of metal die. The fracture strengths were measured and the fracture patterns were observed. The following results were obtained from this study 1. The mean fracture strengths of $Artglass^{(R)}$, $Sculpture^{(R)}$ and $Targis^{(R)}$ were $57.5{\pm}9.5Kgf,\;62.7{\pm}12.2Kgf$ and $60.2{\pm}10.1Kgf$ respectively. There was no significant difference among each hybrid ceramic crown group. 2. The toad required to fracture hybrid-ceramic crowns was significantly smaller than metal-ceramic crowns($131.7{\pm}22.0Kgf$). 3. In the metal-ceramic crowns, labial porcelain detached partially from porcelain-metal junction of proximal side by load. 4. Hybrid-ceramic crowns showed a simple fracture pattern that fracture line began at the loading area and extended through proximal surface, perpendicular to the margin. The crown was separated into two parts of labial side and lingual side. Above results revealed that three kinds of the hybrid-ceramic crowns used in this study must have careful application in clinical use since the strength of hybrid-ceramic crown was lower(about 1/2) than that of metal-ceramic crown.

• 복식
• /
• 제54권5호
• /
• pp.155-166
• /
• 2004

OP-Art was not appreciated by painters and art critics. and according1y has been forgotten in art history. But recently Op-Art is revitalized in fashion and is in its palmy days. This study intends to re-assess the value of Op-Art, by reviewing its influence on fashion design in the post-modern society To this purpose, conceptual characteristics of Op-Art was analyzed. And then, on the bases of these characteristics, the figural characteristics and the meaning of Op-Art in fashion design of post-modern society was re-explained. Op-Art is characterized as an art of flatness of picture plane which uses repetition of simple forms and colors. It is also based on trick of visual perception. Finally. it creates an impression which is flickering or vibrating by means of optical illusion. These characteristics give birth to some features such as simplicity. anonymity and mobility in the Op-Art fashion. The meanings of Op-Art in fashion design in post-modern society are as follows. First, repetition of simple units employed in Op-Art produces feeling of simplicity. which makes the Op-Art fashion works perceived as polysemy. In other words, the feeling of simplicity can be interpreted In diverse perspectives within the social context of our society. The material civilization and technology civilization, which causes the alienation and standardization of man. can be the backgrounds of the Op-Art fashion. Second, Op-Art is an art based on perspectives of spectators. Anonymity in the Op-Art fashion enhances participation of spectators. which gives Op-Art a sense of affinity. Third, through the feeling of mobility created by optical illusion techniques. the Op-Art fashion expresses the opposition to the ideal body image made by power group. In post-modern society, Op-Art in fashion gives new meaning to art. Op-Art in fashion proposes new roles of artist and spectators, and new concepts of art related with roles of human beings. Through general sensibility of men, Op-art in fashion can express new recognition of the post-modern society.

• 대한안전경영과학회지
• /
• 제14권1호
• /
• pp.155-165
• /
• 2012

This essay talks about research of robust design for quality improvement of production procedure of Wet Etchant. It suggested the optimum design method in consideration of specific capability value that is the way to maximize the quality of product in the production system by using Daguchi parameter design method while finding factors affecting product quality with analysis of production system of product A from producer D. Also, it set long term of 6months as noise factor and let it to be the robust design that can find the optimum condition of control factor that is dull to the changes of each month, that is the change in noise factor. The control factor which affects the product quality is decided as combination method, temperature of raw material, combination time and as there are too many possibilities for combination methods, we performed 4 methods first based on previous research data then derived three ways with product that passed SPEC and set as the factor. As a result of application of optimum production procedure suggested in this essay to the actual production process with its standardization, there was a effect of drop of more than 10particles in comparison to the particle number of previous product and also it brought the effect that resulted the stable number of particle of under 30 that is what the client company suggested.

• 폴리머
• /
• 제33권4호
• /
• pp.273-283
• /
• 2009

고분자소재의 표면 특성 중의 하나인 스크래치 거동에 관한 최근의 연구 결과와 현황을 광범위하게 고찰하였다. 본 고찰에서는 고분자 소재의 스크래치 특성에 영향을 주는 실험인자들, 즉 소재재질, 온도, 작용하중, 실험속도, 표면처리, 스크래치 횟수, 고분자 구조 및 관능기, 가교정도 그리고 결정화도에 따른 스크래치 특성을 조사하였다. 또한, 고분자 소재의 스크래치 특성을 정량적으로 평가할 수 있는 접근 방법을 소개하였고, 현존하는 관련 국제시험법을 비교 조사하였다. 고분자 소재의 스크래치 거동을 정확히 평가할 수 있는 방법과 내스크래치성을 향상시킬 수 있는 방법에 관한 최근의 기술적 접근 방법에 대해 토의하였다.