• Transactions on Electrical and Electronic Materials
• /
• 제5권6호
• /
• pp.219-222
• /
• 2004

This paper discovers that there are some peculiar properties that can remove holography grating, which was made in chacogenide thin film by impressed voltage. The thin films were used are $As_{40}Ge_{10}Se_{15}S_{35}$, and we use He-Ne laser in order to form thin films. I-V curved line in a thin film before a lattice was made has the critical point, about 3.7 V. Moreover, the I-V curved line increased current intensity at over 4 V after it made thin film. In addition, while holography grating is being made, and when it has the highest diffraction efficiency, a lattice can be deleted if put more voltage into it.

• 한국전기전자재료학회논문지
• /
• 제22권4호
• /
• pp.327-332
• /
• 2009

In the devices structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine (TPD) /tris (8-hydroxyquinoline)aluminum$(Alq_3)$electron-transport-layer(ETL)(2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline(BCP))/Al, we have studied the efficiency improvement of organic light-emitting diodes depending on the thickness variation of BCP using electron transport layer. The thickness of TPD and $Alq_3$ was manufactured 40 nm, 60 nm under a base pressure of $5{\times}10^{-6}$ Torr using at thermal evaporation, respectively. The TPD and $Alq_3$ layer were evaporated to be deposition rate of $2.5{\AA}/s$. And the BCP was evaporated to be a4 a deposition of $1.0{\AA}/s$. As the experimental results, we found that the luminous efficiency and the external quantum efficiency of the device is superior to others when thickness of BCP is 5 nm. Also, operating voltage is lowest. Compared to the ones from the devices without BCP layer, the luminous efficiency and the external quantum efficiency were improved by a factor of four hundred ninty and five hundred, respectively. And operating voltage is reduced to about 2 V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.349-350
• /
• 2008

In the structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) /2,9-Dimethy 1-4,7-diphenyl-1,10-phenanthroline (BCP)/tris (8-hydroxyquinoline)aluminum$(Alq_3)$/Al device, we studied the efficiency improvement of organic light-emitting diodes due to thickness variation of BCP materials used for a electron breaking layer. The thickness of TPD and $Alq_3$ was manufactured 40 nm, 60 nm, respectively under a base pressure of $5\times10^{-6}$Torr using a thermal evaporation. The TPD and $Alq_3$ layer were evaporated to be at a deposition rate of 2.0 A/s. The BCP was evaporated to be at a deposition of 1.0 A/s. When the thickness of BCP increased from 5 to 30 nm, we found that the luminous efficiency and the external quantum efficiency is superior to the others when the thickness of BCP is 20 nm. Compared to the ones from the devices made without BCP, the luminous efficiency and the external quantum efficiency was improved by 57 %, 70%, respectively.

• ETRI Journal
• /
• 제39권3호
• /
• pp.390-397
• /
• 2017

In this paper, we propose a scheme for designing a tunable pixel layer based on a $Ge_2Sb_2Te_5$ (GST) alloy thin film. We show that the phase change of GST can significantly affect the reflection characteristic when the GST film is embedded into a dielectric encapsulation layer. We investigate the appropriate positions of the GST film within the dielectric layer for high diffraction efficiency, and we prove that they are antinodes of Fabry-Perot resonance inside the dielectric layer. Using the proposed scheme, we can increase the diffraction efficiency by about ten times compared to a bare GST film pixel, and 80 times for the first-to-zeroth-order diffraction power ratio. We show that the proposed scheme can be designed alternatively for a broadband or wavelength-selective type by tuning the dielectric thickness, and we discuss a multi-phase example with a double-stack structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.67-67
• /
• 2008

Application of organic materials with low cost, easy fabrication and advantages of flexible device are increasing attention by research work. Recently, one of them, organic solar cells were rapidly increased efficiency with regioregular poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyricacidmethylester (PCBM) used typical material. To increased efficiency of organic solar cell has tried control of domain of PCBM and crystallite of P3HT by thermal annealing and solvent vapor annealing. [4-6] In those annealing effects, be made inefficiently efficiency, which is increased fill factor (FF), and current density by phase-separated morphology with blended P3HT and PCBM. In addition, increased conductivity by modified hole transfer layer (HTL) such as Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS), increased both optical and conducting effect by titanium oxide (TiOx), and changed cathode material for control work function were increased efficiency of Organic solar cell. In this study, we had described effect of organic photovoltaics by conductivity of interlayer such as PEDOT:PSS and TCO (Transparent conducting oxide) such as ITO, which is used P3HT and PCBM. And, we have measured with exactly defined shadow mask to study effect of solar cell efficiency according to conductivity of hole transfer layer.

• 한국지반신소재학회논문집
• /
• 제4권1호
• /
• pp.7-15
• /
• 2005

토목섬유 자체의 투수성을 이용한 토목섬유 필터는 자연골재의 부족과 탁월한 시공성 때문에 토목섬유의 주된 적용분야로 자리 잡고 있으며, 주요적용 토목섬유는 지오텍스타일과 다양한 형태의 복합포가 있다. 지오텍스타일의 필터 및 배수기능을 이용한 최신의 적용공법 중 지오텍스타일 튜브공법이 있다. 지오텍스타일 튜브공법은 기존의 자연암석재료와 콘크리트 구조물로 제작되어지던 하천 및 해안구조물을 경제적이고 효율적으로 대체할 수 있는 공법으로 그 적용범위가 광범위하게 증가되고 있는 추세이다. 지오텍스타일 튜브공법에 사용되는 지오텍스타일은 폴리머 재질에 따라 크게 폴리프로필렌과 폴리에스터 재질의 지오텍스타일로 구분할 수 있으며, 직조방법에 따라 필터 및 배수특성과 강도특성 등 다양한 차이를 보인다. 본 연구에서는 유사한 인장강도와 유효입경(AOS)의 직포형 지오텍스타일에 대하여 재질에 따른 장기적 필터성능 및 튜브공법 적용성 분석을 실시하였다. 연구실험은 가압셀 장치를 이용한 실내 장기필터성능시험과 실대형 현장시험을 수행하였다. 각각의 실험결과에 따르면 폴리프로필렌 재질의 지오텍스타일이 장기 필터 및 배수기능이 우수하며, 튜브공법의 적용성이 더 효과적인 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.791-795
• /
• 2000

Amorphous chalcogenide glasses have a wide variety of light-induced effects. In this study, we have investigated the diffraction efficiency of chalcogenide. As$_{40}$ Ge$_{10}$ Se$_{15}$ S$_{35}$ thin films by the various applied electric fields. The holographic grating in these thin films has been formed using a linearly polarized He-Ne laser light (633nm). The diffraction efficiency was investigated the two method of applied electric field in the perpendicular and parallel to the direction of inducing beam. We obtained that properties of diffraction efficiency in the two methods of applied electric field. The result is shown that the diffraction efficiency of parallel electric field is 285% increase, η=1.1$\times$10$^{-3}$ and the diffraction efficiency of perpendicular electric field is 80% decrease, η=9.83$\times$10$^{-5}$ . Also, we have investigated the anisotropy property on chalcogenide thin films by the electric field effects.

• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.291-296
• /
• 2020

The high power of a shingled photovoltaic module can be attributed to its low cell-to-module loss. The production of high power modules in limited area requires high efficiency solar cells. Shingled photovoltaic modules can be made by divided solar cells, which can be produced by the laser scribing process. After dividing the 21% PERC cell using laser scribing, the efficiency decreased by approximately 0.35%. However, there was no change in the efficiency of the solar cell having relatively lower efficiency, because the laser scribing process induce higher heat damages in solar cells with high efficiency. To prove this phenomena, the J₀ (leakage current density) of each cell was analyzed. It was found that the J₀ of 21% PERC increased about 17 times between full and divided solar cell. However, the J₀ of 20.2% PERC increased only about 2.5 times between full and divided solar cell.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.262-273
• /
• 2014

To investigate the catching efficiency of a biodegradable round trap for a swimming crab (Portunus trituberculatus), four types of material (two types of biodegradable net, one type of biodegradable plus polyethylene net and one type of polyethylene net) for traps were used in the field test, and the field tests were carried out 11 times in the Boryeong fishing ground of Korea, 2012~2013. The catching efficiency of four type traps was analyzed by catch per trap, weight per trap and mean weight per individual of small and large size swimming crab. Statistical Kruskal-Wallis test was carried out to verify the significant difference for the efficiency between types of material. The catch in number of swimming crab was 9,015 and formed about 94.3% of total catch. In the results of catching efficiency of traps, there was a little difference in catch per trap, weight per trap and mean weight per individual of swimming crab in-situ data. But there was no significant difference in catching efficiency between the biodegradable traps and the PE trap (P>0.05), so it's needed to use widely a biodegradable trap for the conservation and sustainable management of swimming crab resources.

• 한국지반신소재학회논문집
• /
• 제18권4호
• /
• pp.25-37
• /
• 2019

대표적인 지하 공동 복구공법인 개착 공법은 공사비 및 시공시간의 문제를 드러내고 있으며, 이를 해결하기 위한 다양한 비 개착식 공법이 제시되고 있다. 팽창재료를 이용한 지하 공동 복구공법은 비 개착식 공법 중 하나로 공법의 원리는 다음과 같다. 아스팔트층에 천공된 구멍을 통해 양질의 되메움토와 팽창재료를 공동 내로 투입하면, 투입된 팽창재료에 의해 주변 되메움토가 아직 채워지지 않은 빈 공간으로 밀려남과 동시에 다져지면서 공동을 복구하는 원리이다. 본 연구에서는 공동을 모사한 아크릴 토조에 팽창재료를 이용한 지하공동 복구공법을 시공하였다. 공동의 복구효율은 팽창재료의 투입 위치와 개수에 따른 공동의 채움율과 상대 다짐도로 분석하였으며, 실험결과 공동의 복구효율과 최적 시공 위치는 무관한 것으로 확인되었다.