• Structural Monitoring and Maintenance
• /
• v.1 no.2
• /
• pp.197-211
• /
• 2014

An investigation of tunnel linings is performed at two tunnels in the US using complimentary noncontact techniques: air-coupled ground penetrating radar (GPR), and a vehicle-mounted scanning system (SPACETEC) that combines laser, visual, and infrared thermography scanning methods. This paper shows that a combination of such techniques can maximize inspection coverage in a comprehensive and efficient manner. Since ground-truth is typically not available in public tunnel field evaluations, the noncontact techniques used are compared with two reliable in-depth contact nondestructive testing methods: ground-coupled GPR and ultrasonic tomography. The noncontact techniques are used to identify and locate the reinforcement mesh, structural steel ribs, internal layer interfaces, shallow delamination, and tile debonding. It is shown that this combination of methods can be used synergistically to provide tunnel owners with a comprehensive and efficient approach for monitoring tunnel lining conditions.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.171-173
• /
• 2005

Inconel 617 is a solid solution, nickel-chromium-cobalt-molybdenum alloy with an exceptional combination of high temperature strength and oxidation resistance. The combination of high strenth and oxidation resistance at temperatures over $1800^{\circ}F$ makes Inconel 617 an attractive material for such components as ducting, transition liners in both aircraft and gas turbine. In this study, the weldability and weldment characteristics of Inconel 617 are considered in GTAW associated with the two welding current and with back shielding gas using or not. After GTAW with 120A and 150A current, microstructures and hardness test, bending test, tensile test on room and elevated temperature for the determination of optical welding condition.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.5
• /
• pp.889-892
• /
• 2010

We investigated a potential for glucose production from cellulose material using two kinds of hyperthermophilic enzymes, endocellulase (EG) and beta-glucosidase (BGL). Two BGLs, from hyperthermophile Pyrococcus furiosus and mesophile Aspergillus aculeatus, were compared with P. horikoshii endocellulase (EGPh) for complete hydrolysis of cellulose. The combination reactions by each BGL enzyme and EGPh could produce only glucose without the other oligosaccharides from phosphoric acid swollen Avicel (PSA). The combination of both the hyperthermophilic cellulases, BGLPf and EGPh, will be adaptable to a high efficiency system to produce glucose at high temperature.

• Structural Engineering and Mechanics
• /
• v.35 no.5
• /
• pp.539-554
• /
• 2010

Light weight superstructure is beneficial for bridges in remote areas and in emergency erection. In such weight sensitive applications, combination of fibre reinforced plastics (FRP) as material and box-girders as a structural system have great scope. This combination offers various options to tailor structure and its elements but this flexibility poses greater challenge in optimum design. In this paper a procedure is derived for a generalised optimum design of FRP box-girder bridges, using genetic algorithms (GA). The formulation of the optimum design problem in the form of objective function and constraints is presented. Size, configuration and topology optimization are done simultaneously. A few optimum design studies are carried out to check the performance of the developed procedure and to get trends in the optimum design which will be helpful to the new designers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05a
• /
• pp.96-99
• /
• 2004

The combination of mechano-chemical activation and Self-propagating High-temperature Synthesis (SHS) has widened the possibilities for both methods. For YBCO systems the investigation showed that a short-term mechano-chemical activation of initial powders before SHS leads to single-phase and ultra-fine products. A new technique for preparation ultra-fine high-temperature superconductors of YBCO composition with a grain size d ＜1 ${\mu}{\textrm}{m}$ is developed. The specific feature of the technique is formation of the YBa$_2$Cu$_3$O$_{7-{\delta}}$ crystalline lattice directly from an X-ray amorphous state arising as a result of mechanical activation of the original oxide mixture. The technique allows the stage of formation of any intermediate reaction products to be ruled out. X-ray and magnetic studies of ultra-fine high temperature superconductors (HTS) are carried out. Dimension effects associated with the microstructure peculiarities are revealed. A considerable enhancement of inter-grain critical currents is found to take place in the ultra-fine samples.fine samples.

• Biomedical Science Letters
• /
• v.24 no.4
• /
• pp.329-333
• /
• 2018

The purpose of this study is to investigate the anti-inflammation effect of the mixture, consisting of a series of different ratio of Ecklonia cava extract and scoria. Also, to make more functional scoria powder into cosmetic material, studies on the toxicity by cell viability assay. Scoria is found in large amounts in Jeju Island, as an adsorbent of heavy metal ions ($Ni_2{^+}$, $Zn_2{^+}$, and $Cr_3{^+}$) in an aspect of its efficient utilization. Marine plants such as Ecklonia cava contain high amounts of polyphenolic antioxidants. The purpose of this study was to examine the anti-oxidative and anti-inflammation effects of combination of mixture of Eckloina cava extrat and scoria with optimal ratio. Therefore, this study suggested that combination of mixture of Eckloina cava extrat and scoria and its attenuated the oxidative and inflammatory reactions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.191-199
• /
• 2000

Wettability of addition silicone impression material is very important property for making an accurate restoration. This study examined the impression quality in clinical condition and the wettability of impression and die material. Four commercially available addition silicone impression material (Express, Examix, Contrast, Perfect) and three die materials (Die-Keen, Vel-Mix, Fuji-Rock) were studied. A total of 50 putty/wash and heavy body/wash impressions of wet intact permanent molar teeth were examined for definition of the gingival sulcus reproduction and then classified in quality ranking. The percentage of the sulcus reproduction ability of each material was calculated from the sulcus depths of cross-sectioned epoxy resin casts from the impressions and clinically measured sulcus depths, The same impression materials were used to produce 3 groups of die stone casts form void entrapment die had been exposed to milk. Voids in the impression body and stone casts ere counted under a stereoscopic microscope. From the experiment, the following results were obtained : 1. Sulcus reproduction ability of additional silicone impression material were diminished in order of Express, Examix, Perfect, Contrast. The significant difference was found between Perfect and other material. Heavy body/wash combination was superior In putty/wash method n Perfect impression material. 2. In direct observation, Contrast showed least void in impression body but correlations ere not found between sulcus reproduction and void production. 3. In void entrapment laboratory test, wettability were diminished in order of Examix, Contrast, Express, Perfect. Clinical impression recording seems not to correlate with laboratory test. 4. The wettability of die material to impression material was not different in Express, Examix, Contrast. But, in Perfect, Die-Keen had superior wettability to others.

• Corrosion Science and Technology
• /
• v.6 no.5
• /
• pp.233-238
• /
• 2007

Due to the occasional occurrence of a localizedcorrosion such as a SCC and pitting in steam generator tubing(Alloy 600), leading to a significant economical loss, an effective repair technology is needed. For a successful electrodeposition inside a tube, many processes should be developed. Among these processes, an anode to be installed inside a tube, a degreasing condition to remove any dirt and grease, an activation condition for a surface oxide elimination, a strike layer forming condition which needs to be adhered tightly between an electroforming layer and a parent tube and a condition for an electroforming layer should be established. Through a combination of these various process condition parameters, the desired material properties can be acquired. Among these process parameters, various material properties including a mechanical property and its variation along with the height of the electrodeposit inside a tube as well as its thermal stability and SCC resistance should be assessed for an application in a plant. This work deals with the material properties of the Ni electrodeposits formed inside a tube by using the anode developed in this study such as the current efficiency, hardness, tensile property, thermal stability and SCC behavior of the electrodeposit in a 40wt% NaOH solution at $315^{\circ}C$. It was found that a variation of the material properties within the entire length of the electrodeposit was quite acceptable and the Ni electrodeposit showed an excellent SCC resistance.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.3
• /
• pp.1-5
• /
• 2009

Purpose: The aim of this study is to grasp domestic eyewear trends in 2008 with analyzing brands, types, materials, colors and styles of new eyewear products. Methods: Examined all new eyewear products which were on three magazines related with eyewear published in Korea; "안경계", "Eye 11" and "THE AXIS". Results: There are 103 companies, 182 brands in 3 magazines related eyewear published in 2008. There are 77 domestic brands and 105 imported brands, and there are 522 eyeglasses and 126 sunglasses. Material of eyeglasses make up 37.93% of combination frames, 33.14% of metal frames and 28.93% of plastic frames and material of sunglasses make up 50.79% of plastic frames, 30.95% of combination frames and 18.25% of metal frames. From a style point of view, there are lots of retro and casual styles which one can express one's individuality with. In terms of colors, basic colors such as black and gray are mainstream and pastel tones and vivid tones are mainly used as the point color. Conclusions: The results of analyzing new eyewear products show that many light and feeling good products such as thin plate frames, TR frames and thin plate-TR combination frames were released in case of domestic eyewear products. In case of imports, there are lots of simple Ti frames and acetate frames which were variety patterns and colors.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.3
• /
• pp.133-140
• /
• 2023

The performance of lithium ion batteries depends on the usage environment and the combination ratio of cathode materials. In order to develop a high-performance lithium-ion battery, it is necessary to manufacture the battery and measure its performance while varying the cathode material ratio. However, it takes a lot of time and money to directly develop batteries and measure their performance for all combinations of variables. Therefore, research to predict the performance of a battery using an artificial intelligence model has been actively conducted. However, since measurement experiments were conducted with the same battery in the existing published battery data, the cathode material combination ratio was fixed and was not included as a data attribute. In this paper, we define a training data model required to develop an artificial intelligence model that can predict battery performance according to the combination ratio of cathode materials. We analyzed the factors that can affect the performance of lithium-ion batteries and defined the mass of each cathode material and battery usage environment (cycle, current, temperature, time) as input data and the battery power and capacity as target data. In the battery data in different experimental environments, each battery data maintained a unique pattern, and the battery classification model showed that each battery was classified with an error of about 2%.