• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.363-365
• /
• 2007

Novel concept of sensor mat and its signal processing method is proposed for patient monitoring in medical application. Proposed sensor mat structure has sensing inner layer which has cross-linked arrangement using plastic optical fiber(POF). Large core diameter of plastic optical fiber behaved as band pass filter by averaging the noise component. caused by unwanted environmental factors. Signal processor followed by sensor output added noise immune performance by filtering out unwanted component. Fail-proof patient breath monitoring scheme was realized by using intelligent decision algorithm. Unlike the conventional approach by using mechanical sensor, which have high sensitivity both to intruder and to environmental noise, our approach provided reliable breath motion detection.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.699-702
• /
• 2009

This paper proposes a gender identification using shoeprint images. It is difficult for the proposed method to identify an individual if shoeprint images for identification leaked out. Because the proposed method identifies gender without the faces, the type of dress and the hair types images. Therefore we can use safely the proposed method in public place. In addition, a sensor mat which we developed is reasonable to use mechanical switches arranged in a matrix pattern without pressure switches. We had shoeprint images with the sensor mat. We measure feature parameters from shoeprint images. The feature parameters are length, width and area of shoeprint. Utilizing the feature parameters, we identified gender. In order to verify the gender identification rate of the proposed method, we set up the sensor mat at an entrance of buildings and took shoeprint images of 100 men and 100 women. As a result, we achieved about 86 percent of the gender identification rate.

• Journal of Korea Foundry Society
• /
• v.23 no.3
• /
• pp.153-157
• /
• 2003

본 논문은 레오캐스팅용 AZ91 합금 슬러리를 제조하는 새로운 방법에 관한 것이다. 그 원리는 AZ91 합금 액상에서 Mn의 용해도차에 의해 생성되는 $Al_8(Mn,Fe)_5$ 정출물을 ${\alpha}-Mg$ 초정 생성을 위한 불균일 핵생성 자리로 사용하고자 하는 것이다. 제조된 슬러리의 미세조직 분석결과 $Al_8(Mn,Fe)_5$ 정출물이 ${\alpha}-Mg$ 내에 위치하고 있어, 이로부터 정출물이 효과적으로 불균일 핵생성 자리로 작용하고 있음을 알 수 있었다. 또한 Mn 함량의 증가는 $Al_8(Mn,Fe)_5$ 정출물 수를 증가시켜 고상분율이 일정할 때 슬러리 내 ${\alpha}-Mg$ 고상의 크기를 감소시키고 구형도를 향상시킨다. 이외에도 냉각속도 및 유지시간이 슬러리 미세조직에 미치는 영향에 대해서도 보고하였다.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.655-660
• /
• 2005

This study was carried out to evaluate of water purification in oxidation pond with filamentous algae mat. It is the water treatment process in the small rural streams to remove the organic materials and nutrients. We used the filamentous algae mat(FAM) which selectively predominate the filamentous algae to prevent the additional contamination by algae outflow. The removal efficiencies of COD, SS, T-N and T-P in Oxidation Pond with Filamentous Algae Mat were -2.5%, 84.7%, 63.9% and 89.2%, respectively. The removal efficiencies of T-N and T-P which are nutrients index were high. Results of this study would help us to determine the possibility of using the water treatment on the contaminated small rural streams.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.56-62
• /
• 2008

The surface and edge structure of OSB is defined by surface strand orientation and strand mat thickness variation parallel to the length of the panel using video-microscope. The bending strength of OSB was correlated with surface strand orientation and decreased with increasing the orientation angle in the direction parallel to length of the panel. Average strand mat thickness variation parallel to the length of the panel did not influence the bending strength, but the bonding characteristics among the outermost strands affects the bending strength of OSB. Hankinson formula can be used to predicts the MOE according to strand orientation in the surface of OSB, and more precise strand alignment and reducing thickness variation should be important in the structural performance of OSB panels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.4
• /
• pp.285-290
• /
• 2005

Mechanical properties of rubber mat are influenced by many factors such as compounding ingredients and states of cure, process of rubber, and fillers. Our study aim is to investigate influence of N-isopropyl-N'-chloro-P-phenylene diamine antioxidant on the thermal aging and ozone cracking. In this work, the degradation of antiblastic rubber mat was studied and suggested mechanism to involve two-types of degradation, thermal-aging and ozone-cracking both of which can be contained antioxidant or non-antioxidant.

• Korean Journal of Agricultural Science
• /
• v.6 no.2
• /
• pp.166-184
• /
• 1979

In order to prevent the water loss in the irrigation canal constructed on the sandy gravel layer or on the other highly permeable ground layer, lining has been practiced. Many studies have been done so far on the lining method to prevent the water loss in the irrigation canal and recently studies on the lining with plastic film or polyethylene film were also reported. However, the plastic film or polyethylene film has low strength and is liable to break, and water loss from pin hole caused by contacting with sand or gravel is highly predicted. This study was then conducted to find proper lining and buring method in canal construction of polypropylene mat after coated with vinyl, as one way to overcome the shortcoming frequently observed when plastic or usual polyehtylene film were used. Eventhough rather longer periods of experiments are needed to attain reliable and accurate results on the variation of durability, the durability of asphalt coated area, or on the damage due to freeze after burial or exposure of polypropylene mat, the experiemental results obtained during one year of period are summarized as follows: 1. The curvature at the area between canal bottom and side slope had increased stability and saved consruction cost. The relationship among the variation of curvature, the reduction of polypropylene mat and the reduced amount of soil cutting at each side slope was presented in Fig. 7 through 9. 2. The depth of covering material to protect polypropylene mat was desired to be over 30cm, considering the water depth, side slope, canal cleaning practices, traffic, or back pressure of irrigation period. 3. In order to increase the canal stability and to prevent slope erosion, sandy soil was required, to be placed under ground, and coarse gravel should cover the surface area of canal. 4. The studies on the stability of side slope in the canal should consider the passive area on the bottom and the slope should be about 1 to 2, considering the slope stability, allowable velocity and tractive force. 5. When compared with earth lining, the lining with polypropylene mat coated with vinyl was responsible to save 28% and 37% of canal lining cost, when the soil carrying distances were 500 and 700m. respectively. 6. The water interception was almost completely attained when the polypropylene mat coated with vinyl was used for lining. But further studies were assumed to be necessary for the use of asphalt since the strength of polypropylene mat connected with asphalt will vary with duration.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.5
• /
• pp.70-82
• /
• 1996

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.96.2-96
• /
• 1998

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.11a
• /
• pp.81-81
• /
• 1998