• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.515-520
• /
• 2005

The behavior of jointed rock mass is much different from that of intact rock due to the presence of joints. Similarly, the characteristics of elastic wave propagation in jointed rock are considerably different from those of intact rock. The propagation of elastic waves in jointed rock is greatly dependent on the state of stress. The roughness, filling materials, and spacing of joints also affect wave propagation in jointed rock. If the wavelength of elastic waves is much larger than the spacing between joints, wave propagation in jointed rock mass can be considered as wave propagation in equivalent continuum. A rock resonant column testing apparatus is made to measure elastic waves propagating through jointed rock in the state of equivalent continuum. Three types of wave, i.e, torsional, longitudinal and flexural waves are monitored during rock resonant column tests. Various roughness and filling materials are applied to joints, and rock columns with various spacings are used to understand how these factors affect wave propagation under a small strain condition. The experimental results suggest that the characteristics of wave propagation in jointed rock mass are governed by the state of stress and influenced by roughness, filling materials and joint spacings.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 봄 학술발표회 논문집
• /
• pp.232-239
• /
• 1997

The phenomenology of shock loading effects in brittle mass has been of interest to researchers and engineers. The shock loading as blasting causes strong stress waves in the structures. Discontinuous faces due to shock waves interrupt the tensile stress wave propagation and reflect the stress wave propagation. To predict the fracturing behavior of brittle mass, it is required for the numerical method that can analyze the colliding and slipping behavior of discontinuous faces and the wave propagation in the mass, simultaneously In this study, the wave propagation in the brittle materials is analyzed using the modified distinct element method to be able to predict the behavior of discontinuous structures. The behavior of an unsupported bar subjected to loading at the end is analyzed to verify the rigid body motion of a bar and the relative displacement in the bar. The colliding behavior of two bars is analyzed to investigate the propagation of stress waves in the bar. The fracturing behavior of a bar due to impact loading is analyzed to investigate the propagation of stress waves in the bar with and without the discontinuous faces. The applicability of the modified distinct element method to the wave propagation problems is investigated.

• Geomechanics and Engineering
• /
• 제30권5호
• /
• pp.449-460
• /
• 2022

Safe underground construction in a rock mass requires adequate ground investigation and effective determination of rock conditions. The estimation of rock mass behavior is difficult, because rock masses are innately anisotropic and heterogeneous at different scales and are affected by various environmental factors. Quantitative rock mass classification systems, such as the Q-system and rock mass rating, are widely used for characterization and engineering design. The measurement of rock classification parameters is subjective and can vary among observers, resulting in questionable accuracy. Geophysical investigation methods, such as seismic surveys, have also been used for ground characterization. Torsional shear wave propagation characteristics in cylindrical rods are equal to that in an infinite media. A probabilistic quantitative relationship between the Q-value and shear wave velocity is thus investigated considering long-wavelength wave propagation in equivalent continuum jointed rock masses. Individual Q-system parameters are correlated with stress-dependent shear wave velocities in jointed rocks using experimental and numerical methods. The relationship between the Q-value and the shear wave velocity is normalized using a defined reference condition. This relationship is further improved using probabilistic analysis to remove unrealistic data and to suggest a range of Q-values for a given wave velocity. The proposed probabilistic Q-value estimation is then compared with field measurements and cross-hole seismic test data to verify its applicability.

• 융합보안논문지
• /
• 제8권4호
• /
• pp.173-181
• /
• 2008

최근 웜에 의한 사이버 위협이 증가함에 따라 웜의 확산 특성을 분석하기 위한 전파 모델이 연구되고 있다. 대표적인 예로 수학적 모델링 기법인 Epidemic(SI), KM(Kermack-MeKendrick), Two-Factor, AAWP(Analytical Active Worm Propagation)등의 모델 기법들이 제시되었다. 하지만, 기존 모델 방법들은 대부분 코드레드와 같은 네트워크를 대상으로 하는 랜덤 스캐닝 기법에 대해서만 모델링이 가능하다. 또한 거시적인 분석만 가능하고 특정 위협에 대해 예측하는데 한계점을 가지고 있다. 따라서 본 논문에서는 과거의 위협 발생 데이터를 근거로 하여 Mass SQL Injection 같은 사이버위협에 적용 가능한 마코브 체인(markov chain) 기반 예측 방법을 제시한다. 이를 통하여 각 위협별 발생 확률 및 발생빈도를 예측할 수 있다.

• 대한기계학회논문집B
• /
• 제24권11호
• /
• pp.1486-1496
• /
• 2000

The initial flame kernel development and flame propagation in a constant volume combustion chamber is analyzed by the heat release rate and the mass fraction burnt. The combustion pressure is measured with a piezoelectric type pressure sensor. In order to evaluate the effects of ignition system and ignition energy on the flame propagation, four different ignition systems are designed and tested, and the ignition energy is varied by the dwell time. Several different spark plugs are also tested and examined to analysis the effects of electrodes on flame kernel development. The results show that the when the dwell time is increased, and when the spark plug gap is extended, heat release rate and the mass burnt fraction are increased. The materials and shapes of electrodes affect the flame development, because they change the energy transfer efficiency from electrical energy to chemical energy. The diameter of electrodes influences not only the heat release rate but also the mass burnt fraction as well.

• 한국자원식물학회지
• /
• 제15권3호
• /
• pp.221-226
• /
• 2002

새우난초의 대량 증식 시스템을 확립하기 위하여 새우난초 종자 무균파종 및 순화 방법에 따른 생육특성 을 조사하였다. 발아율은 MS배지 에서 65% 이상이었고 유묘의 대량증식이 가능하였다. 계대배양한 유묘의 증식은 고체배지 보다는 액체배지에서 생육상태 가 더 양호한 경향을 보였다. 순화실험 결과, 70%차광조건에서 플라스틱 멀칭으로 습도를 80% 이상 유지하였을 때 100% 순화 생존하였다. 기내 육성된 배양묘는 백태로 뿌리를 감싸 심었을 때 발근이 가장 잘 이루어졌으나 순화과정 중에서 백태 대신에 질석과 펄라이트를 1:1 부피비로 이용한 경우에도 88%의 비교적 높은 생존율을 보였다.

• 한국자동차공학회논문집
• /
• 제3권2호
• /
• pp.136-145
• /
• 1995

The aim of this study is to gain a better understanding of the effect of a flow motion on the flame development by means of an optically-accessible constant-volume combustion chamber and the visualization technique of a combustion flame. At first, the characteristics of a flame propagation are investigated in the combustion field of the two kinds of flow conditions such as a quiescent and a flowing condition, and methane-air mixture is used as fuel. Then the same investigation is performed in two flow configurations : bulk flow motion type and turbulence generating type. In this study, the combustion phenomena are analyzed by measuring the combustion pressure, flame propagation speed, mean velocity, turbulent intensity, and mass fraction burned.

• 한국자원식물학회지
• /
• 제19권3호
• /
• pp.432-435
• /
• 2006

A rapid and mass propagation method for multiple shoots and plant regeneration using bulb scales of Muscari comosum var. plumosum were developed. In vitro different parts of bulb scale as explants were cultured on 11 kinds of MS (1962) media supplemented with various plant growth regulators to induce shoot and callus. A combination of 2.0 mg/L 6-BA and 2.0 mg/L IBA on MS medium was the most favorable and induced the highest production (80%) of shoot formation after 30 days. We also found that the middle part of bulb scale was the best for mass propagation of Muscari comosum var. plumosum of which production could reach 64.4%.

• International journal of advanced smart convergence
• /
• 제13권2호
• /
• pp.110-118
• /
• 2024

This study examines factors influencing nonusers' resistance to the adoption of the metaverse, focusing on propagation mechanisms. It elucidates the role of innovation resistance within the metaverse adoption process. We applied the Innovation Resistance Model in the context of the metaverse and considers three major groups of factors influencing resistance to the metaverse: innovation characteristics (perceived usefulness, compatibility, perceived risk, and complexity), consumer characteristics (personal innovativeness), and propagation mechanisms (mass media, online media, and personal communication). An online survey of college students who do not use the metaverse revealed that perceived usefulness, compatibility, personal innovativeness, and online media were negative predictors of resistance to the metaverse. Conversely, perceived risk, mass media, and personal communication were positive predictors of resistance to the metaverse. Furthermore, innovation resistance was found to play a mediating role in the metaverse adoption process. Drawing upon the findings, we suggested marketing strategies to decrease resistance to the metaverse.

• 천문학회지
• /
• 제56권1호
• /
• pp.117-124
• /
• 2023

A Forbush decrease (FD) is a depression of cosmic ray (CR) intensity observed by ground-based neutron monitors (NMs). The CR intensity is thought to be modulated by the heliospheric magnetic structures including the interplanetary coronal mass ejection (ICME) surrounding the Earth. The different magnitude of the decreasing in intensity at each NM was explained only by the geomagnetic cutoff rigidity of the NM station. However, sometimes NMs of almost the same cutoff rigidity in northern and southern hemispheres observe the asymmetric intensity depression magnitudes of FD events. Thus, in this study we intend to see the effects on CR intensity modulation of FD event recorded at different NMs due to different ICME propagation directions as an additional parameter in the model explaining the CR modulation. Fortunately, since 2006 the coronagraphs of twin spacecraft of the STEREO mission allow us to infer the propagation direction of ICME associated with the FD event in 3-dimension with respect to the Earth. We suggest the hypothesis that the asymmetric CR modulations of FD events are determined by the propagation directions of the associated ICMEs.