• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.498-502
• /
• 2004

In a link-motion mechanism, numerous links are interconnected and each link executes a constrained motion at a high speed. Due to the complicated constrained motions of the constituent links, dynamic unbalance forces and moments are generated and transmitted to the main frame. Therefore unwanted vibration is produced. This degrades productivity and precise work. Based on constrained multi-body dynamics, the kinematic analysis is carried out to enable design changes to be made. This will provide the fundamental information for significantly reducing dynamic unbalance forces and moments which are transmitted to the main frame. In this work, a link-motion punch press is selected as an example of a link-motion mechanism. To calculate the mass and inertia properties of every link comprising a link-motion punch press, 3-dimensional CAD software is utilized. The main issue in this work is to eliminate the first-order unbalance force and moment in a link-motion punch press. The mass, moment of inertia link length, location of the mass center in each link have a great impact on the degree of dynamic balancing which can be achieved maximally. Achieving good dynamic balancing in a link motion punch press is quite essential fur reliable operation at high speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.1-9
• /
• 2020

The manufacturing processes of high-precision parts for PGM (Precision Guided Missiles) have not been improved for decades; they still depend on machining or high-precision casting. These processes have an advantage when making small amounts of high-reliability parts in the usual case of a PGM system. In the case of a PGM system, however, which has been made for striking an extensive area, requires hundreds of bomblet units that require mass productivity. In addition, in the case of a part that is very difficult to machine, mass productivity and quality cannot be satisfied at the same time. In particular, cost reduction is an essential precondition to strengthening the export competitiveness of Korean defense articles. This study examined whether the MIM process is appropriate for manufacturing high-precision parts that require mass productivity. The optimized MIM process condition was determined after carrying out fundamental research. Comparisons of the quality of prototype parts with original parts and a functional test of a fuse that had been made with MIM parts highlighted the application possibility of the MIM process.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.259-262
• /
• 2012

The most of military systems that developed today are composed with many sub-systems for mission execution. The test of military systems for delivery test of mass product such that part test, PCB test, component test, integration test. This paper discusses improving productivity test method that functional test of PCB has a various function. Improving productivity is minimize testing item by man and minimize kind of tester, so that decrease product cost by production time for test. PCB tester be developed many kind of test method that systems were developed by many different engineers. This paper study testing check point for testing that how to minimize of kind of tester, how to automatic test for all of function that have inputs and outputs.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.113-126
• /
• 1992

Recently the multi-kind, small-amount manufacturing system has been replacing the mass manufacturing system, and domestic machining inustry also is eager to absorb the new technology because of its high productivity and cost reduction. The optimization of the cutting condition has been a vital problem in the machining industry, which would help increase the productivity and raise the international competitiveness. It is intended in this study to investigate the machining costs per unit time which is essential to the analysis of the optimal cutting condition, to computer the cutting speed that lead to the minimum machining costs and the maximum production to suggest the cutting speed range that enables efficient speed cutting, and to review the machining economy in relation to cutting depth and feed. Also considered are the optimal cutting speed and prodution rated in rrelation with feed. It is found that the minimum-cost cutting speed increases and the efficient cutting speed range is reduced as machining cost per unit time increases since the cutting speed for maximum production remains almost constant. The machining cost is also lowered and the production rate increases as the feed increases, and the feed should be selected to satisfy the required surface roughness. The machining cost and production rate are hardly affected by the cutting depth if the cutting speed stays below 100m/min, however, they are subject to change at larger cutting depth and the high-efficient speed range also is restricted. It can be established an adaptive optimal cutting conditions can be established in workshop by the auto-selection progam for optimal operation. It is expected that this method for choosing the optimal cutting conditions might contribute to the improvement of the productivity and reduced the cost. It is highly recommended to prepare the optimal cutting conditionthus obtained for future use in the programing of G-function of CNC machines. If proper programs that automatically select the optimal cutting conditions should be developed, it would be helpful to the works being done in the machine shops and would result in noticeable production raise and cost reduction.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.1
• /
• pp.109-118
• /
• 2015

Open raceway ponds are cost-efficient for mass cultivation of microalgae compared with photobioreactors. Although low-cost options like wastewater as nutrient source is studied to overcome the commercialization threshold for biodiesel production from microalgae, a cost analysis on the use of wastewater and other incremental increases in productivity has not been elucidated. We determined the effect of using wastewater and wavelength filters on microalgal productivity. Experimental results were then fitted into a model, and cost analysis was performed in comparison with control raceways. Three different microalgal strains, Chlorella vulgaris AG10032, Chlorella sp. JK2, and Scenedesmus sp. JK10, were tested for nutrient removal under different light wavelengths (blue, green, red, and white) using filters in batch cultivation. Blue wavelength showed an average of 27% higher nutrient removal and at least 42% higher chemical oxygen demand removal compared with white light. Naturally, the specific growth rate of microalgae cultivated under blue wavelength was on average 10.8% higher than white wavelength. Similarly, lipid productivity was highest in blue wavelength, at least 46.8% higher than white wavelength, whereas FAME composition revealed a mild increase in oleic and palmitic acid levels. Cost analysis reveals that raceways treating wastewater and using monochromatic wavelength would decrease costs from 2.71 to 0.73 $/kg biomass. We prove that increasing both biomass and lipid productivity is possible through cost-effective approaches, thereby accelerating the commercialization of low-value products from microalgae, like biodiesel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2808-2814
• /
• 2012

The most of military systems that developed today are composed with many sub-systems for mission execution. The test of military systems for delivery test of mass product such that part test, PCB test, component test, integration test. Improving productivity is minimize testing item by man and minimize kind of tester, so that decrease product cost by production time for test. PCB tester be developed many kind of test method that systems were developed by many different engineers. This article studies testing check point for testing that how to minimize of kind of tester, how to automatic test for all of function that have inputs and outputs. Development of tester for improving productivity requires classify functional allocation of main system and sub system, sub system require PCB for functional allocation start on preliminary design period for reducing testing item and testing fixture.

• Microbiology and Biotechnology Letters
• /
• v.5 no.1
• /
• pp.18-23
• /
• 1977

Experiments were carried out to pursue the availability and the feasibility of utilizable cellulosic materials as substrate for the production of cellulosic single cell protein. The resuluts were obtained as fellows. 1. Effects of carbolydrates as a sole carton source on the growth of Cellulomonas flavigena KIST 321 were examined. The result showed that cellulose and xylose would be most utlizable for cell mass production. 2. Alkaline treated waste papers and clothes resulted in good growth of the organism than intact ones did. However the waste papers as substrate of cellulosic fermentation were not digestible, even if the meterial was treated with alkalies. 3. Rice straw, rape straw and panic grass appeared to be good substrates for the cell mass production. 4. Leaves were proved to be a good substrate for the cell mass production, but wood sawdust was hardly digested by merely alkaline treatment. 5. When cellulosic wastes as the substrate were examined into the concentration of alkaline solution, the result suggested that the best productivity of cell mass from cellulosic materials was obtained on treatment with 0.8∼1.0％ NaOH solution. 6. The productivity of cell mass was increased by washing out with water after alkaline treatment of newspaper, pine sawdust, lime sawdust and pine leaf.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.117-120
• /
• 2001

Resistance spot welding is widely employed in a manufacturing process. In recent years, the requirement for more sophisticated quality control procedures has been in the mass production industries. The requirements for high productivity and good welding qualities have lead to the development of more widely available microprocessor or computer based control. In this study, the inverter-type power source and welding servo gun are developed.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.568-571
• /
• 2000

Resistance spot welding is widely employed in a manufacturing process. In recent years the requirement for more sophisticated quality control procedures has been in the mass production industries. The requirements for high productivity and good welding qualities have lead to the development of more widely available microprocessor or computer based control, In this paper the inverter-type power source and welding servo gun are developed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.91-94
• /
• 2007

We introduce the inline type mass production tool for the large size lighting OLEDs and flexible OLEDs. The manufacturing tool includes the linear belt source what is new concept for the organic deposition processes and the deposition operation combines directly to the encapsulation operation in a tool. The linear belt source evaporation in deposition processes is performed during the substrate transferring to innovatively improve the productivity in manufacturing.