• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.103-112
• /
• 2000

This research aims at the improvement of the manufacturing productivity of . kitchen furniture industry. W company deals with the orders of 2 types - the one is the batch order for mass production, and the other is the order of a customized single set. But, because the company has a single manufacturing system appropriate to mass production despite of the above 2 types-orders, the problems of increasing work-in-process, throughput time and material handling time were resulted in, and the overall productivity was generally low. We proposed a new material handling method to substitute the traditional one, the rearrangement of facility layout, and the introduction of a proper outsourcing method. This research results in about 80% increase in production quantity in the same period.

• 산업경영시스템학회지
• /
• 제6권8호
• /
• pp.55-61
• /
• 1983

In order to increase productivity, modern business which use the techniques of mass production should progress gradually from to use of human labor to total mechanization in the various steps of the production process. This will not only avoid the prospect of future labor shortages, but will also solve nancy of the problems involved in increasing productivity In this paper, we have approached the problem of determining the number of machine units that can be economically assigned to one operator by using Palm's model.

• 대한안전경영과학회지
• /
• 제2권2호
• /
• pp.139-153
• /
• 2000

To develope a domestic machinery industry, international competition through reducing cost by increasing productivity is as important as evolving technology and increasing quality. In this study, we have studied in application of GT technology. GT is a skill that acquires high productivity using part's resemblance for multi part and small size production like mass production. We have classified group, such as design, layout and the others, to be applied systematically. The design group includes retrieval for drawings and study for GT design. The layout group includes GT layout, analysis of production process and study for composition method. And others include scheduling, standardization and standard process.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권6호
• /
• pp.349-353
• /
• 2003

The physiological characteristics of cultures of very high cell mass (e.g. 10g cell mass/L), termed“ultrahigh cell density cultures”is reviewed. A close relationship was found between the length of the optical path (OP) in flat-plate reactors and the optimal cell density of the culture as well as its areal (g m$\^$-2/ day$\^$-1/) productivity. Cell-growth inhibition (GI) unfolds as culture density surpasses a certain threshold. If it is constantly relieved, a 1.0cm OP reactor could produce ca. 50% more than reactors with longer OP, e.g. 5 or 10cm. This unique effect, discovered by Hu et al. [3], is explained in terms of the relationships between the frequency of the light-dark cycle (L-D cycle), cells undergo in their travel between the light and dark volumes in the reactor, and the turnover time of the photosynthetic center (PC). In long OP reactors (5cm and above) the L-D cycle time may be orders of magnitude longer than the PC turnover time, resulting in a light regime in which the cells are exposed along the L-D cycle, to long, wasteful dark periods. In contrast, in reactors with an OP of ca. 1.0 cm, the L-D cycle frequency approaches the PC turnover time resulting in a significant reduction of the wasteful dark exposure time, thereby inducing a surge in photosynthetic efficiency. Presently, the major difficulty in mass cultivation of ultrahigh-density culture (UHDC) concerns cell growth inhibition in the culture, the exact nature of which is awaiting detailed investigation.

• 한국수산과학회지
• /
• 제38권1호
• /
• pp.12-19
• /
• 2005

This study investigated the productivity and growth of copepods, Sinocalanus tenellus 2 strains, Paracyclopina nana 3 strains, Apocyclops royi 2 strains, Tachidius triangularis 1 strain and Tigriopus sp. 1 strain at different temperatures $(24,\;28\;and\;32^{\circ}C)$ under 15 psu and various salinities (10, 20, 30 psu) at $28^{\circ}C$ for an individual culture. And the mass culture was carried out to evaluate the production of these copepods in the 500 mL vessel. For an individual culture of copepod, survival period of a brood female tended to increase with the decrease of temperature, but was not significantly influenced by salinity. With an increase of temperature and a decrease of salinity, maturation period of nauplii in all species tended to decrease. Total nauglii production from a broodo female at $24^{\circ}C$ was higoher than that from a brood .female at either 28 or $32^{\circ}C$ for S. tenellus and at $32^{\circ}C$ than either 24 or $32^{\circ}C$ for A. royi Haenam stram, but was not influenced by temperature for another copepods. And total nauplii production from a brood female at 10 and 20 psu tended to be higher than that from a brood female at 30 psu, expect for Tigriopus sp. and P. nana Hwajinpo strain. Total nauplii production from a brood female was the highest in Tigriopus sp. (350 nauplii) at $28^{\circ}C$ under 20 psu, followed by A. royi Haenam strain (187 nauplii) at $32^{\circ}C$ under 15 psu and P. nana Hwajinpo strain (152 nauplii) at $24^{\circ}C$ under 10 psu. In the mass culture of each copepod, P. nana was the most productive (26.6 mg dry weight) and this value was two and four times higher than productivity of Tigriopus sp. and A. royi, respectively.

• Fibers and Polymers
• /
• 제7권2호
• /
• pp.146-157
• /
• 2006

Traditional spinning systems have reached profitability limits in developed countries due to high production costs and low system productivity. Pneumatic spinning is seen as a developing system, because productivity is much higher than conventional systems. This study evaluates one of the main problems to increase productivity in pneumatic spinning, where air mass-flow is dragged by the drafting cylinders. This flow interacts with the incoming fibres deviating them from their expected path. Via laser anemometry, airflow velocity distribution around drafting cylinders has been measured and it has been found that vorticity is created at the cylinder's inlet. Extensive CFD simulation on the air flow dragged by the cylinders has given a clear insight into the vortex created, producing valuable information on how cylinder design affects the vorticity created. Several drafting cylinder designs have been tested without giving any improvement in productivity. However, the use of a drafting cylinder with holes in it produced good results to the problem of air currents, strongly reducing them and therefore allowing a sharp increase in yarn quality, as well as an increase in productivity. An extensive study on vortex kinematics has been undertaken, bringing with it a better understanding of vortex creation, development and breakdown.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.64-65
• /
• 2014

Recently freeform buildings which are free from simple shape are implemented depending on improvement of construction method. However, freeform buildings are spent more time and cost to materialize than typical form. Because molds for production of freeform shape cannot be reused. For these reasons, low productivity, delay of construction schedule and budget overflow are occurred. Thus, technology of molds need to be developed for manufacturing of freeform concrete segments. The objective of this study is manufacturing of freeform concrete segments using rod type mold. This technology can implement not only application to various shape but also mass production. Thus, problems of construction period, productivity and cost can be solved. After this study, productivity analysis should be continued through the field application.

• Design & Manufacturing
• /
• 제10권2호
• /
• pp.39-43
• /
• 2016

Most of automobile parts manufactured through sheet metal forming are mass-produced by using press mold. In recent years, automation and speeding up of press lines have been expanding to maximize product productivity using a press die. The proportion of the moving time in the press line is high, and therefore requires high-speed and automated equipment for the moving process. In this paper, to provide the double-moving system can be the moving time reduction and increased productivity. Developed transport system consists of the material supply, the material feeding device and the PLC controller and the devices are positioned between each of the pressing process. In this paper, the double-moving system including developed units using a multi-axial single-acting through this reduced the C/T(cycle time) and improved the productivity.

• 한국해양바이오학회지
• /
• 제8권2호
• /
• pp.54-66
• /
• 2016

Productivity of Saccharina japonica was evaluated by water layers in Gijang and Wando sea area to find the suitable farming areas for mass production of biomass. For this, S. japonica was cultivated at various depths (0.5, 1, 2, 3 m), respectively. As the result, the growths in Gijang were 225.1-261.5 cm in length, 18.5-21.3 cm in widths, 396.0-537.7 g in weights, 14.3-17.8 kg/cluster in biomass, and those in Wando were 332.0-435.7 cm in lengths, 24.6-32.5 cm in widths, 766.0-1,232.9 g in weights, 16.4-24.3 kg/cluster in biomass. It showed that the growths of blades in Wando were faster than those in Gijang. The growth rates of blades by the depths were faster at 0.5-1 m depth from January to June. After June, however, as the growth rates of blades were lower than the shedding rates of blades, it showed that the growth of S. japonica decreased at all depth conditions except 2 m depth. Productivity of S. japonica was better in Wando which is lower in the water temperature and nutrients than Gijang.

• Journal of Microbiology and Biotechnology
• /
• 제11권4호
• /
• pp.644-648
• /
• 2001

The biological control potential of entomopathogenic nematodes (EPN) can be enhanced by improved culture efficiency. Optimization of the media is a key factor for improving in vitro mass production of entomopathogenic nematodes. This study reports the effect of medium concentration. The medium is a combination of carbohydrates, lipids, proteins, sats, and growth factors, on the growth of Heterorhabditis bacteriophora and its symbiotic bacterium Photorhabdus liminescens. The overall optimal medium concentration for nematode recovery, hermaphrodite size, bacterial mass, infective juveniles (IJs) yield, and doubling time was 84 g/l. At this concentration rate, the doubling time of IJs production and the biomass of symbiotic bacteria was 1.6 days and 12.8 g/l, respectively. The maximum yield of $2.4{\times}{10^5}IJs/ml$ was attained within a one-generation cycle (eight days). The yield coefficient was $2.8{\times}{10^6}$ IJs/g medium, and the maximum productivity was $3.1{\times}{10^7}$ IJs per day. Medium concentration affected two independent factors, recovery and hermaphrodite size, which in turn influenced the final yield.