• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.65-66
• /
• 2012

For HF antenna, whip antenna with 6m length or more has been used generally. In this paper, we suggest a new HF antenna which is smaller than commercial HF whip antenna. The shape of the proposed antenna is "ㄷ" and the size of the antenna is $1m{\times}2m$. The feature of the antenna has been simulated by NECWin tools.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.35-40
• /
• 2012

In this paper, we present the size reduction method of HF whip antenna for ship communication. To reduce the size of the HF whip, the end part of linear whip is modified to helical type. We designed the whip antenna with 60% size of the commercial whip antenna and carried out communication experiments using the commercial and the designed whip antennas. From the experimental results, we found that the proposed whip antenna can replace the commercial whip antenna for ship communication.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.76-78
• /
• 2011

In this paper, 0.8 GHz and 1.8 GHz dual-band antenna was designed for global system for mobile communications (GSM) and the Long Term Evolution (LTE) The proposed antenna was made using CST Microwave Studio 2009. My script antenna's substrate is Taconic TLY-5 and dielectric constant is 2,2 and has 1.0mm thickness with a compact design of the proposed antenna, Thus it shows that this proposed antenna can be used in Wireless Communication System.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.5-8
• /
• 2004

In this paper, a novel 400MHz band small meander microstrip antenna is proposed the shape of the proposed antenna is a waved meander microstrip with a pair rf short pins on th￡ edge. the length of waved meander microstrip is $\lambda_g/4$ but it bends to half its size. Therefore, the total size of the proposed antenna is reduced to about 1/20 which is compared with a square patch antenna the simulated antenna gain is about 3dBi at 424MHz. the proposed antenna of -10dB impedance bandwidth is measured about $1.4\%$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.265-269
• /
• 2005

In this paper shows the Designed active antenna for wireless LAN that is consisted of 5.5GHz band local LNA and Microstrip Patch Antenna. LNA improved noise special quality using NEC company's NE3210S01 and Microstrip Patch Antenna designed to have omnidirectional characteristic. Designed Microstrip Patch Antenna expressed omnidirectional characteristic special quality having gains of about 8.3dBi. LNA gains 15dB, noise index showed special quality under 1 dB.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.323-328
• /
• 2005

The paper describes a meander antenna using magneto-dielectric composite for 433.92 MHz band. The antenna with magneto-dielectric material in this paper is suggested for miniaturization of antenna size. The return loss of meander antenna is achieved by optimizing the permittivity, $\varepsilon_r$=1.71-j0.004 and permeability, $\mu_r$=2.39+j2.58. Over all dimension of the antenna is $51\times11\times1.6mm$. The return loss and gain are -41 dB, -5dBi, respectively at 433.92 MHz.

• Journal of electromagnetic engineering and science
• /
• v.13 no.3
• /
• pp.165-172
• /
• 2013

This paper describes a design for a spiral antenna with a conical wall to obtain the high gain. The gain and the axial ratio of the spiral antenna were improved by a new design that included a conical wall and an optimized Archimedean slit on the ground plane in a conventional antenna with a circular cavity wall and a 4.5-turn slit. A gain improvement of 9.5 dBi higher and a good axial ratio of 1.9 dB lower were measured by the added conical wall and the newly designed slit from the current distribution control on the ground plane, respectively. The measured return loss, gain and axial ratio of the proposed antenna showed a good agreement with the simulated results. The proposed antenna will be applied to a non-linear junction detector system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.453-456
• /
• 2009

In this paper, a Microstrip antenna for wireless LAN is designed in HyperLAN 5GHz. The IEEE 802.11a have allocated HyperLAN band. We proposed CPW-fed antenna structure for compact antenna. This structure shows that a ground plane and a patch plane are existed at one layer. The proposed antenna is designed on FR-4 substrate with a relative dielectric constant 4.3, thickness of 1.5mm and tangent loss 0.02. The designed antenna shows that VSWR is below 2 and has good return loss below -10dB over the 5.725~5.825GHz bandwidth with HyperLAN.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.70-72
• /
• 2011

In this paper, Dual-band monopole antenna for MIMO system is proposed. At this time the FR-4 substrate was used as a dielectric is 4.4, the size of 83mm * 50mm * 1.6mm size 3mm, the width of the proposed antenna by a $50{\Omega}$ microstrip line feed, and, LTE in the frequency 746-787MHz, 1710-1755MHz has been designed to operate at the resonant frequency less than-10dB and showed a good return loss in the operation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.449-452
• /
• 2009

In this paper, we propose a ultra-wideband(UWB) antenna for UWB applications. The proposed antenna is designed to operate from 3.1GHz to 11.2GHz. It consists of a rectangular patch with two steps, a single slot on the patch, obtained to decrease the back radiation by a partial ground plane. Details of the proposed antenna design and measured results are presented and discussed.