• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.3
• /
• pp.236-245
• /
• 2021

In this study, a drifting test using a experimental vessel (2,966 tons) in the northern waters of Jeju was carried out for the first time in order to obtain the fundamental data for drift. During the test, it was shown that the average leeway speed and direction by GPS position were 0.362 m/s and 155.54° respectively and the leeway rate for wind speed was 8.80%. The analysis of linear regression modes about leeway speed and direction of the experimental vessel indicated that wind or current (i.e. explanatory variable) had a greater influence upon response variable (e.g. leeway speed or direction) with the speed of the wind and current rather than their directions. On the other hand, the result of multiple regression model analysis was able to predict that the direction was negative, and it was demonstrated that predicted values of leeway speed and direction using an experimental vessel is to be more influential by current than wind while the leeway speed through variance and covariance was positive. In terms of the leeway direction of the experimental vessel, the same result of the leeway speed appeared except for a possibility of the existence of multi-collinearity. Then, it can be interpreted that the explanatory variables were less descriptive in the predicted values of the leeway direction. As a result, the prediction of leeway speed and direction can be demonstrated as following equations. Ŷ₁= 0.4031-0.0032X₁+0.0631X₂-0.0010X₃+0.4110X₄ Ŷ₂= 0.4031-0.6662X₁+27.1955X₂-0.6787X₃-420.4833X₄ However, many drift tests using actual vessels and various drifting objects will provide reasonable estimations, so that they can help search and rescue fishing gears as well.

• Journal of Navigation and Port Research
• /
• v.47 no.4
• /
• pp.202-211
• /
• 2023

In maritime accidents, collisions involving fishing vessels are more frequent and severe than those involving other types of vessels. Previous cases of collision accidents caused by fishing vessels causing serious damage implied that fishing vessels maintained high speeds until just before the collision and that they collided with much larger vessels. This study investigated the correlation between the severity of ship damage resulting from fishing vessel collisions and the vessel's speed. The effective impact speed commonly used in the road transport sector was utilized to analyze ship collision accidents. The study collected collision data between fishing vessels and between fishing vessels and non-fishing vessels from accident investigation reports from 2016 to 2022. The effective impact speed was calculated for a total of 617 vessels. After using binary and multinomial logistic regression methodology, the analysis was carried out with effective impact speed as the independent variable and severity of accident as the dependent variable. The analysis revealed a statistically significant correlation between the effective impact speed and the severity of ship damage, indicating that the severity of ship damage is influenced not only by the effective impact speed but also by the tonnage of the vessel.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.55-60
• /
• 2004

In this study, the configuration and tension of a towing cable for side-scan sonar are predicted in an ambient flow and at an unsteady towing condition. The governing equation of three-dimensional dynamic analysis for a flexible cable is solved using a finite difference method. We successfully predict the configuration and tension of a side-scan sonar and designed the towing system. It is found in static analyses that the side-scan sonar must be towed to keep a its stable depth at a reasonable speed. The study also reveals in the transient analyses that the dominant component affecting the top tension is the tangential drag force for the larger towing speed than the critical speed, and the self weight of a towed instrument for the smaller towing speed than. It should be maneuvered for a towing vessel with good consideration for the impact effect in a cable due to tension peak when a towing speed is suddenly increase. The developed program can be applicable for three-dimensional dynamic analysis of a towing system for various marine survey instruments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.3
• /
• pp.241-247
• /
• 2011

Marine casualties of vessel are said to be in most case caused by human error, but it would be valid for the assumption that the ship is built with high quality and then should be acceptable to the safety standards. It means that the inherent characteristics of a ship should be the first consideration on the safety of ship. Therefore it is basically necessary for navigator to grasp the inherent stability of his ship and ensure that the ship complies with the minimum statutory standards of stability. This study is to realize the stability of the Korean offshore large purseiner varying with loading conditions by the inclining data and some calculations. The author compared the stability of the ship with IMO criteria and domestic rule, and proposed some improvement for the safety of the ship. The results are summarized as follows ; The values of GM of the ship according to the loading condition in navigation satisfy both of the IMO criteria and the domestic rule, but in case of the area under the GZ curves between the heel angles of $30^{\circ}$ and $40^{\circ}$, and the heel angle occuring the maximum righting lever not satisfy the IMO rule at the fishing ground departure and arrival conditions in the haul in net situation. The initial metacentric height of the ship is very large, but the range of stability and the occurring angle of the maximum GZ are very small, so even small inclining can bring about the beam end. The best method of improvement for that is to increase the freeboard of the model among the variables.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.75-83
• /
• 2003

The navigation area approach to Mokpo port consists of narrow channels with 30mile section, and the route is crossed with many fairways. Specially, except Mokpo-Gu fairway routeing is not assigned and there are many threatening factors against the safe operation of vessel because fishing and mining areas are designated Therefore, this paper proposed a plan for safe passage through a maritime transportation environmental assessment with the analysis of surrounding environment, danger element of navigation, traffic observation and marine accidents.

• Journal of Fisheries and Marine Sciences Education
• /
• v.3 no.1
• /
• pp.35-43
• /
• 1991

The fishing vessels operation is a kind of maritime profit-making activities, which are complicatedly integrated by the basic and supplemental fishing activities with navigation. The Fishing Vessels Act of Korea defines the character of fishing vessels and gives a legal status to them, and this Act itself is linked with the allied public laws including the Ships Act of Korea. For this reason, the legal status of fishing vessels as Korean flagged ships by the public law is analogous to the general commercial vessels. And the specific character of ownership of the fishing vessels by the Korean Maritime-Commercial Act as a privated law is analogous to the general commercial vessels, nevertheless the Chapter 4(Carriage of goods) and the Chapter 5(General average) of this Act do not apply to the fishing vessels except the fish carriers. A fishing vessel possesses the legal status as a Korean flagged ship by having it registered and putting it on record under the provision of national law, however the principle of genuine link is an important factor for acquisition of nationality. Especially, the basic rules by the Law of the Sea those are attended with the distant-water fishing vessels operation at the overseas fishing ground are summarized as follows ; Firstly, the rights of navigation and fishing activities on the high seas are fundamentally recognized to all states, but the freedom is restricted according to the international legal order aiming at protection of reasonable interests of other states and conservation of the living resources and marine environment. Secondly, in the EEZ or EFZ the freedom of navigation is recognized, but fishing activities are exclusively ruled by the national law of the coastal state. Thirdly, foreign fishing activities are prohibited but the right of innocent passage is recognized in the territorial sea, while both activities are prohibited in the internal waters of the coastal state.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.1
• /
• pp.1-15
• /
• 2003

A recent trend of global shipping industry adopting Port State Control (PSC) system is recognized as a proficient mechanism in preventing maritime accident and protecting marine environment. Disadvantages of Korean shipping companies in PSC inspection are unavoidable as Tokyo MOU imposed priority listed flag to Korea Having stated above, appropriate research and prompt preparation in compliance with current PSC requirements for the Korean shipping companies have become an immediate need The objectives of this study are: First, to review in understanding of PSC in overall and foundation of enforcement. Second, to study interaction of international treaties regarding PSC. Third, to compare practical compliance among the countries and to open up a case study on Korean shipping companies in adopting PSC Last, to suggest direction to the Korea shipping companies the most proficient way in compliance with the current Tokyo MOU requirement.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.698-703
• /
• 2014

Currently, demand of liquefied natural gas as an alternatice energy inceases because of depletion of fossil fuels. it is accompanied by inceasing demand of LNG ship. Consequentially, it is expected that demand of bellows for LNG ship increase. The material used for LNG vessels's bellows is an alloy of INCOLOY 825 and STS316L, which are strong against low-temperature brittleness and seawater corrosion. This study establishes the welding condition of LNG vessel's bellows material in extremely low temperature, and analyzes the formability of weld through Erichsen Test. When welding was conducted at optimal condition, tensile strength of weld presneted strength value up to 90% compared with base metal. As results of formalbility through Erichsen test, very good weld that failure occrued in base metal was gotten.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.1
• /
• pp.27-36
• /
• 2011

In the proposed paper numerical calculations are carried out using two versions of a three-dimensional, timedomain panel method developed by the group of Prof. P. Sclavounos at MIT, i.e. the linear code SWAN2, enabling optionally the use of the instantaneous non-linear Froude-Krylov and hydrostatic forces and the fully non-linear SWAN4. The analytical results are compared with experimental results for three hull forms with increasing geometrical complexity, the Series 60, a reefer vessel with stern bulb and a modern fast ROPAX hull form with hollow bottom in the stern region. The details of the geometrical modeling of the hull forms are discussed. In addition, since SWAN4 does not support transom sterns, only the two versions of SWAN2 were evaluated over experimental results for the parent hull form of the NTUA double-chine, wide-transom, high-speed monohull series. The effect of speed on the numerical predictions was investigated. It is concluded that both versions of SWAN2 the linear and the one with the non-linear Froude-Krylov and hydrostatic forces provide a more robust tool for prediction of the dynamic response of the vessels than the non-linear SWAN4 code. In general, their results are close to what was expected on the basis of experience. Furthermore, the use of the option of non-linear Froude-Krylov and hydrostatic forces is beneficial for the accuracy of the predictions. The content of the paper is based on the Diploma thesis of the second author, supervised by the first one and further refined by the third one.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.4
• /
• pp.435-443
• /
• 2018

The Antarctic krill Euphausia superba is important commercially and ecologically as a basic component of the Antarctic Ocean ecosystem. To manage this resource, it is important to determine the distribution and standing of krill in the water layer. Acoustic methods can capture information about the entire water layer quickly. Acoustic surveys were conducted from March 3 to March 14, 2017, using the commercial fishing boat Sejong (7,765 tons). Acoustic systems with a frequency of 38 kHz and a 200 kHz commercial echo sounder (ES70, Simrad, Norway) were used and the acquired data were processed using post processing software. The density and standing of Antarctic krill were determined using the two-frequency difference method, using the characteristics of two frequencies. To compare the frequency difference of krill, the method using the frequency difference according to the krill length, recommended by the Commission for the Conservation of Antarctic Marine Living Resources (CCAMLR) and the values extracted according to the krill length at survey stations where only krill were collected during the study period, were compared. The frequency difference ranges were 3.96-5.91 dB and -3.0~13.8 dB, respectively.