• 수산해양기술연구
• /
• 제59권4호
• /
• pp.336-343
• /
• 2023

The aging fishery training vessels from the past have mostly been decommissioned, and many universities are introducing state-of-the-art large fishery training vessels. The purpose of these training vessels is to train marine professionals and above all, safety to prevent marine accidents should be of utmost priority as many students embark on the vessel. This study estimated the impact of the hydrodynamic interaction forces acting on the model vessel (fishery training vessel) from the bank when the vessel pass near the semi-circle bank wall in various conditions through the numerical calculation, especially concerning maneuvering motions of the vessel. For estimation, variables were mainly set as the size of the semi-circle shape, the lateral distance between the bank and the model vessel, and the depth near the bank. As a result, it was estimated that, in order for the model vessel to safely pass the semi-circle bank wall at a speed of 4 knots, the water depth to the vessel draft ratio should be 1.5 or more (approximately 8 m of water depth), and the lateral distance from the semi-circle bank wall should be 0.4 times the model vessel's length (L_pp) or more (a distance of 34 m or more). Under these conditions, it was expected that the model vessel would pass without significantly being affected by the bank wall.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.401-409
• /
• 2021

In this study, an improvement plan was derived by statistically analyzing the system and current status of tests in Korea and survey of seafarers perception in order to improve the expertise of the Korean fishing vessel officer examination. Recently, about 70% of marine accident occurs from fishing vessels. Therefore, it's necessary to improve the examination to reduce marine accidents. As a result, it was identified that an average of 29,265 applicants have applied over the past four years, and among them, 1,833 people have applied for fishing vessel licenses, accounting for 6.3% of the total. According to the result of explanation and response of 115 people, they responded that practical utilization was low, each operation waters has different requirements and it's necessary to improve the contents of the questions for the specialty subject. In addition, inappropriate questions were found in previous exams. To reduce marine accidents caused by human error and to improve the professionalism of fishing vessel officers, it is necessary to adjust the test criteria and ratio with characteristics of fishing vessels and in the long run, institutional improvements such as the distinction between test subjects and licenses are needed.

• 수산해양기술연구
• /
• 제43권2호
• /
• pp.149-159
• /
• 2007

Marine casualties of fishing vessels were analyzed to reduce the sacrifice of human life using data of the Korean Maritime Safety Tribunal from 1995 to 2004 in Korea. The occurred number of fishing vessel casualties were likely to be higher portion than non-fishing vessels, but the occurring ratio of fishing vessel casualties were marked 2.96 times lower than that of non-fishing vessel casualties. The occurring ratios of bigger fishing vessel casualties were higher than smaller ones. Most marine casualties were resulted from the human factors such as poor watchkeeping, negligent action for engine and etc. The trend of marine casualties showed that the machinery damage hold the first and collision accidents took the second, but on a point of cause of them, operating errors took first and poor handling or inspection of machinery held the second place. Because those two casualties took major portion, and very important problems for safety of fishing vessels, so we ought to try to reduce the factors before everything else. In addition, since collision, sinking and capsizing in marine casualties have led to death, missing and injury of lives, it is necessary for navigation operators to take more educations and training intended to reduce the marine casualties systematically and continuously.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2003년도 추계학술발표회
• /
• pp.123-126
• /
• 2003

In the present paper, the analysis is on the safe navigation between ships moving each other in restricted waterways under the external force, such as wind or current The numerical simulation of manoeuvring motion was carried out to propose an appropriate safe speed and distance between ships, which is required to avoid marine disasters from the viewpoint of marine safety. From the inspection q this investigation, it indicates the following result In case of proximal navigation between ships under the wind and current, the low-speed vessel is potentially hazardous because the rudder force if low-speed vessel needed for steady-state course-keeping is not sufficient, compared to the high-speed vessel The manoeuvring characteristic based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in restricted waterways.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 Asia Navigation Conference
• /
• pp.208-216
• /
• 2004

Since 2000, the authors have been developing remote radar network system to observe the vessel traffic in Tokyo Bay. In December 2002, the first operational remote radar station was set at the National Defense Academy in Yokosuka, and vessel traffic observation was started. However, it was impossible to perform accurate observation in the northern part of Tokyo Bay by this Yokosuka radar station only. In September 2003, the second remote radar station and AIS receiving station were installed at Higashi Ogishima in Kawasaki. This second radar enabled us to carry out accurate observation in that area. Both radars can be remotely controlled from the monitoring station in Tokyo University of Marine Science and Technology. On September 30 and October 1,2003, the vessel traffic observation was carried out using both radars. Combining radar images observed by both radars, the ships' tracks were taken and the dangerous ships were extracted by using SJ value and Bumper Model. The time changes of dangerous ship density in some areas in Tokyo Bay and utilization ratio of the traffic routes were also investigated. In addition, analyzing the AIS date received at Kawasaki station, the positions and speed vectors of the ships equipped with AIS were shown.

• 수산해양교육연구
• /
• 제25권3호
• /
• pp.677-689
• /
• 2013

Recently, the supplying of basic materials for construction of building as sand is big issues due to lack of shoreside supply. For solving this problem, many suppliers attempt to gather aggregate from the sea bottom of the EEZ & west coastal area of Korea. In this regard, the 'Jangantoe' which exists in the westside of the Daesan port is worth noticing as good seasand supplying areas. The Chungnam Aggregate Association have plan to gather of seasand from 'Gaduckdo 5 regions & Igok 3 regions' which lies westside about 6 miles off from the Jangantoe areas. This designated area also locates upper parts of the Gadaeam TSS(Traffic Separation Scheme) which is very useful passing routes for the sailing vessels of Inchon & Daesan ports. In this study, the evaluation of the safety for passing vessels in the vicinity of the seasand gathering area was performed by various methods of radar observations & GICOMS AIS data for marine traffics and vessel traffic-flow simulation of the 'Marine Traffic Safety Diagnostic Scheme'. By the results of this evaluation, I suggested comprehensive countermeasures for the safety of passing vessels in the near the seasand gathering area.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.130-130
• /
• 2018

• 해양환경안전학회지
• /
• 제19권2호
• /
• pp.219-224
• /
• 2013

해양유류오염사고가 발생한 경우에 필요한 모든 방제자원을 사전에 확보하고 사고에 대응하는 것이 가장 효과적이지만 현실적으로는 한계가 있는 실정이다. 그러므로 대규모 유류오염사고에 대비하여 유류오염으로 피해를 입게 되는 오염지역의 어선을 활용하는 방안이 중요한 대안이 될 수 있다. 미국 등 선진국에서도 지역 어선을 이용한 임시방제정 프로그램이 개발되어 운영되고 있는 사례를 찾아볼 수 있다. 본 연구는 국내 소형어선에 적합한 기름방제용 스위핑 암 시스템을 검토하였다. 모델로 선정된 소형 선박은 연안유자망어선 및 연안복합어선으로 2.5~3.5톤, 길이 8~9 m, 폭 2.5~2.8 m, 마력 200~250 HP, 선질 FRP인 어선이다. 개발된 장치는 모델 선박에 간편하게 장착할 수 있고 이동이 가능한 구조로 설계되었다. 조립 및 분해를 쉽게 하기위해 각 부품의 무게를 10 kg 이하로 구성함으로써 현장 실용성을 높였다.

• 해양환경안전학회지
• /
• 제7권3호
• /
• pp.29-40
• /
• 2001

The introduction of coastal vessel traffic services enables vessels in coastal waters to navigate in safety or to get her position with ease and prevents the vessel from becoming cause of casualties. But it needs relatively huge amount of cost to construct and operate and maintain. Thus we must be checked with economical adequacy of the the proposed coastal vessel traffic services by comparing the cost of the construction, operation and maintenance with the expected benefit made by the expected decrease in marine casualties. In previous paper, a proper cost-benefit analysis model for the Korean practice will be suggested. In this Paper, the proposed the cost-benefit analysis model of coastal vessel traffic services was applied to the Koje coastal waters 20mi1es from the top of Maemul-Do and Yokchi-Do. As the result, we confirmed the propriety of the cost-benefit analysis with the application of the proposed model to Koje waters. Also, it is verified that the introduction of coastal vessel traffic services, as proposed, is adequate and economical. The cost-benefit analysis model proposed in this study could be used to investigate the economic Propriety of new aids to navigation and traffic safety facilities in the future.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.69-77
• /
• 2023

Recently, carbon composites have been applied to various fields. However, carbon composites have not been applied to the fishing vessel field due to its structure standards centered on glass composites. In this study, a structural strength evaluation study was conducted for the application of carbon composites in the fishing vessel field. Hull minimum thickness verification test and hull joint verification test were conducted. Compared to glass composites, the verification was based on equivalent or better performance. The results show that carbon composites can reduce the weight by 20% compared to glass composites. For hull joints, it was necessary to increase the thickness of the joint seam by the thickness of the hull to apply carbon composite. Through this study, a standard for the application of carbon composites to fishing vessel can be established.