• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.206-210
• /
• 2015

The most important thing for NOVEC gas fire extinguishing equipment is to release NOVEC gas, which contained in the extinguishing container, to the safety section by the time appointed. For this matter, it is significant to decide arrangement and size of the proper piping equipment. This study has developed the design methodology of NOVEC gas fire extinguishing equipment in use of pipe network analysis techniques. Based on the design methodology, each design coefficient is chosen. It is found that the calculated result, which is 6.498 seconds, has been counted within the 10 seconds limit, which is fairly satisfied with extinguishing releasing time based on the developed methodology. At that time, the pressure loss is 21.09bar.

• Ocean Systems Engineering
• /
• v.8 no.2
• /
• pp.119-166
• /
• 2018

The assessment of the potential for the design of marine renewable energy systems is reviewed and the current situation for marine renewable energy is promising. The most studied forms of marine renewable energy are ocean wind energy, ocean wave energy and tidal energy. Wind turbine generators include mostly horizontal axis type and vertical axis type. But also more exotic ideas such as a kite design. Wave energy devices consist of designs converting wave oscillations in electric power via a power take off equipment. Such equipment can take multiple forms to be more efficient. Nevertheless, the technology alone cannot be the only step towards marine renewable energy. Many other steps must be overcome: policy, environment, manpower as well as consumption habits. After reviewing the current conditions of marine renewable energy development, the authors analyzed the key factors for developing a strong marine renewable energy industry and pointed out the huge potential of marine renewable energy.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.239-243
• /
• 2012

The cylinder liner of a low speed engine is one of the most important parts of the marine diesel engines used in merchant ships. However, a sufficient degree of precision in the manufacturing method for these cylinder liners has never existed. Conventional honing stones have always been used for machining large marine cylinder liners. Therefore, it is necessary to develop a honing process that optimizes the honing characteristics. In this study, a CBN honing stone was manufactured to improve the honing performance for a cylinder liner and shorten the processing time, and machining experiments on a practical cylinder liner were carried out. Then, a comparison was made between the CBN honing and honing with a conventional GC stone using parameters such as the honing time, machining quantity, and honing cost. As a result, for a #60 CBN stone, the machining amount was significantly improved compared to the conventional one by about $1.1{\mu}m$/min, and in respect to the machining cost, a reduction of about 57% was achieved. However, an improvement in the process with a #800 CBN stone could not be expected because it did not show a significant difference compared to the case of the existing stone. From the above results, if the liner were honed using a CBN honing stone, the rough machining and intermediate processing during an early stage of the honing process were excellent compared to the conventional one. However, we could not find a significant difference in the case of finish honing.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.1
• /
• pp.24-33
• /
• 2001

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.1
• /
• pp.6-23
• /
• 2001

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.8
• /
• pp.834-841
• /
• 2005

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.169-169
• /
• 2018

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2021-2022
• /
• 2011

IEC 62388은 선박용 레이더 시스템에 관한 국제 규격으로 국제해사기구의 새로운 성능기준인 Resolution MSC.192(79)의 의결에 따라 제정되었으며 2008년 7월 1일이후 선박에 설치되는 레이더 시스템은 해당 성능 표준을 만족하도록 권고하고 있다. 이에 따라 기존의 IEC 60936 시리즈 및 IEC 60872 국제 규격은 폐지되었다. 본 논문에서는 현재 MED 인증시 적용되고 있는 IEC 62388을 개략적으로 소개하여, 현행 규격에 의한 선박용 레이더 시스템 개발시 의무적인 필수 요구사항을 고찰하고자 한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.654-661
• /
• 2018

This paper analyzes the type of facilities and equipment of the marina port and analyzes its lift facilities (lift pier) and equipment (marine mobile lift). It set up the lift facilities and equipment standards. Depending on the gross tonnage of vessels in operation in Korea, the required inner width of lift piers is 5.50 m for 35-ton vessels, and 6.20 m for 50-ton vessels. The inside width of the marine mobile lift is 6.10 m for 35-ton vessels, and 6.80 m for 50-ton vessels. There are two places where the target ship can be lifted from the lift pier installed on the domestic marina, and other marinas' lift piers inner widths are insufficient by about 0.35 ~ 0.50 m. Among the marine mobile lifts in operation, there were two apparatuses that secured the inside width necessary to lift the target vessel. Other marine mobile lifts' inner widths are insufficient by about 0.3 ~ 0.6 m.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.321-327
• /
• 2010

During sailing by wind-driven thrust on the sail, a catamaran sailing yacht generates leeway and heeling. For estimating resistance and moment prediction of a real ship by changing of running attitude, a model test of the ship has to be carried out. This study aims at establishing experimental techniques for a catamaran sailing yacht by changed attitude during running direction. Through the model test, drag and side force of the real ship are predicted. Also through experiment, rolling and yawing moments were considered.