• 전기학회논문지
• /
• 제63권11호
• /
• pp.1564-1570
• /
• 2014

An electric vehicle (EV) not only receives electric power from the electric vehicle supply equipment (EVSE), but it also exchanges the information regarding charging process with the power gird through the EVSE. However, the EV and EVSE communicate using the ISO/IEC 15118 standard while the EVSE and power grid communicate using the IEC 61850 standard. Therefore, the EVSE should support both the ISO/IEC 15118 and IEC 61850 standards, and provide a data mapping function between the two communication protocols so that the EV and power grid, which support different protocols, can communicate with each other throughout the charging process. In this paper, we propose a mapping method of the EVSE, which converts the ISO/IEC 15118 data to IEC 61850 and vice versa, based on the XML schema of each protocol. The proposed method converts the data using the XSL (eXtensible Stylesheet Language) method, which defines the data mapping between two XML schemas. Our approach is more flexible and easier to maintain against changes in charging scenarios and the standards than other existing approaches such as one-to-one data mapping methods.

• 융합신호처리학회논문지
• /
• 제3권2호
• /
• pp.58-63
• /
• 2002

OFDM 시스템에 있어서 송신 신호의 큰 PAPR는 비선형 증폭기를 통과할 때 심각한 신호 왜곡을 일으킨다. 이러한 PAPR을 감소하는 방법으로, 본 논문에서는 가장 간단한 클리핑 방법을 사용하여 시스템에 미치는 영향을 BER 특성의 기준으로 나타내고 제안된 시스템과 다른 여러 가지 시스템들을 비교하였다. 본 논문에서 제안한 방법은 QPSK 매핑후에 매핑된 신호사이에 0을 삽입하는 방법을 사용하여 동일한 PAPR 조건하에서 시스템에 미치는 영향을 비교하였다. 또한 다른 시스템들과의 BER 성능에 대한 데이터 전송률과 대역폭 관계의 trade-off가 있음을 보였다.

• 한국컴퓨터정보학회논문지
• /
• 제23권10호
• /
• pp.33-43
• /
• 2018

In this paper, we propose a method to automatically generate the description of an RDF graph structure. The description is expressed in Shape Expression Language (ShEx), which is developed by W3C and provides the syntax for describing the structure of RDF data. The RDF graphs to which this method can be applied are limited to those generated by the direct mapping, which is an algorithm for transforming relational data into RDF by W3C. A relational database consists of its schema including integrity constraints and its instance data. While the instance data can have been published in RDF by some standard methods such as the direct mapping, the translation of the schema has been missing so far. Unlike the users on relational databases, the ones on RDF datasets were forced to write repeated vague SPARQL queries over the datasets to acquire the exact results. This is because the schema for RDF data has not been provided to the users. The ShEx documents generated by our method can be referred as the schema on writing SPARQL queries. They also can validate data on RDF graph update operations with ShEx validators. In other words, they can work as the integrity constraints in relational databases.

• 한국소음진동공학회논문집
• /
• 제17권6호
• /
• pp.491-497
• /
• 2007

Reasonably accurate estimation of the exposed population to the distinct levels of noise is essential to the efficient management of urban environmental noise. This study proposes a method of calculating the number of exposed people to industrial noise by using GIS tool and noise mapping. The exposed population of noise based on estimation of the number of people that lived in each building in urban area is compared with the one based on density of population. This study suggests the five step method that consists of gathering the fundamental data, extracting the property from the digital map, noise mapping based on the three dimensional topography, estimating population that lives in each building, merging the various results with GIS tool, and estimating exposed population to industrial noise through analyzing the noise map with GIS tools.

• Wind and Structures
• /
• 제35권4호
• /
• pp.243-253
• /
• 2022

The conformal mapping method (CMM) has been broadly exploited in the study of fluid flows over airfoils and other research areas, yet it's hard to find relevant research in bridge engineering. This paper explores the feasibility of CMM in streamlined box girder bridges. Firstly, the mapping function transforming a unit circle to the streamlined box girder was solved by CMM. Subsequently, the potential flow solution of aerostatic pressure on the streamlined box girder was obtained and was compared with numerical simulation results. Finally, the aerostatic pressure attained by CMM was utilized to estimate the aerostatic coefficient and flutter performance of the streamlined box girder. The results indicate that the solution of the aerostatic pressure by CMM on the windward side is satisfactory within a small angle of attack. Considering the windward aerostatic pressure and coefficient of correction, CMM can be employed to estimate the rate of change of the lift and moment coefficients with angle of attack and the influence of the geometric shape of the streamlined box girder on flutter performance.

• 전자공학회논문지S
• /
• 제36S권1호
• /
• pp.38-50
• /
• 1999

현재 많은 칼라 장치는 다양한 방법으로 영상을 재현한다. 그러나 장치마다 재현된 색은 장치 사이의 색역차로 인해 원래의 색과 많은 차이로 보인다. 본 논문에서는 서로 다른 장치에서 동일한 색을 재현할 때 발생하는 색의 오차를 줄이기 위해 영상 의존 색역 사상 방벙을 제안하였다. 이 방법은 색역 사상시 휘도값 변화에 의해 일어나는 휘도값 변화를 보상하면서 채도값을 클리핑한다. 색역 사상시 중심점인 앵커점을 기존의 방법보다 낮게 설정함으로써 원 영상과 재현된 영상 사이에서의 색 오차를 줄였다. 또, 사상된 영상을 색대비를 높이기 위해 프린터 색역을 밝은 영역과 어두운 영역으로 나누어 다른 사상 방법을 사용하였다. 결과적으로 모니터에 나타난 영상의 색과 비슷하고 대비가 높은 영상을 프린터로 재현할 수 있었다.

• 방송공학회논문지
• /
• 제23권2호
• /
• pp.283-292
• /
• 2018

LDR (low dynamic range) 영상에 비해서 밝기 범위가 크게 늘어난 HDR (high dynamic range) 영상을 촬영할 수 있는 장비와 디스플레이할 수 있는 기기들이 개발되고 있고 영상의 밝기 범위를 효율적으로 변환하는 방법에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 LDR 영상을 HDR 영상으로 효율적으로 변환하기 위해서 guided filter를 사용한 reverse tone mapping 기법을 제안한다. Guided filter를 사용하여 한 장의 LDR 영상으로부터 BEF(brightness enhancement function)을 구한 후에 LDR 영상에서 밝기가 포화된 부분을 효율적으로 복원하여 HDR 영상을 생성하는 기법을 제안한다. 또한 영상이 지나치게 밝거나 어두운 경우 영상 촬영시의 노출 값을 추정하여 보정한 후에 밝기 범위를 변환하는 방법을 이용하여 생성되는 HDR 영상의 화질을 극대화하는 방법을 연구하고 모의 실험 결과로부터 제안하는 기법은 기존의 방법에 비해서 우수한 화질의 HDR 영상을 생성하는 것을 입증한다.

• 한국정보과학회논문지:시스템및이론
• /
• 제30권11호
• /
• pp.663-674
• /
• 2003

범프 매핑은 복잡한 모델링 과정 없이 기하 매핑을 통하여 땅콩 껍질의 돌기와 같은 객체 표면의 세밀한 부분을 표현해내는 기법이다. 그러나 이 기법은 법선 벡터 쉐이딩과 같은 상당한 복잡도를 가진 연산을 픽셀 당 처리해줘야 하므로, 이의 하드웨어 구현은 상당한 비용을 필요로 한다. 본 논문에서는 극 좌표계를 이용한 새로운 범프 매핑 알고리즘 및 하드웨어 구조를 제안한다. 이는 참조 공간으로의 변환을 위한 새로운 벡터 회전 방식과 연산이 최소화된 조명 계산 방식을 갖는 구조로, 기존의 구조에 비해 범프 매핑을 효과적으로 수행한다. 결과적으로 제안하는 구조는 범프 매핑에 필요한 연산 및 하드웨어를 상당량 줄였다.

• 한국조경학회지
• /
• 제29권5호
• /
• pp.101-114
• /
• 2001

This study analyzed and examined literature and legislation in Korean and other countries to examine the concept and sense of mapping of forest functions that would be used as basic information for efficient application and management of forest ecosystems. The mapping of forest functions in Germany has been utilized to field data for efficient work and management of the ecosystem, and evaluation of forest environmental ecology by the mapping of forest functions has been applied directly or indirectly in country management plans, conservation of nature and landscape management plans. Forest protection areas in Korea were analysed for creating a map of forest functions. As the results, forest functions could be sorted into five categories, such as conservation area of forest production, prevention of disasters, landscape and abiological natural resource, valuable biotope and ecosystem and civil recreation. The mapping method was applied to these 5 categories important conservation targets. It is considered that mapping of forest functions in Korea can be used for systematic forest works and efficient ecosystem utilization and management, as well as it use basic data for environmental and ecological comprehension and evaluation on forest and green tract of land on the level of country development and utilization.

• ETRI Journal
• /
• 제36권6호
• /
• pp.913-923
• /
• 2014

This paper proposes a global mapping algorithm for multiple robots from an omnidirectional-vision simultaneous localization and mapping (SLAM) approach based on an object extraction method using Lucas-Kanade optical flow motion detection and images obtained through fisheye lenses mounted on robots. The multi-robot mapping algorithm draws a global map by using map data obtained from all of the individual robots. Global mapping takes a long time to process because it exchanges map data from individual robots while searching all areas. An omnidirectional image sensor has many advantages for object detection and mapping because it can measure all information around a robot simultaneously. The process calculations of the correction algorithm are improved over existing methods by correcting only the object's feature points. The proposed algorithm has two steps: first, a local map is created based on an omnidirectional-vision SLAM approach for individual robots. Second, a global map is generated by merging individual maps from multiple robots. The reliability of the proposed mapping algorithm is verified through a comparison of maps based on the proposed algorithm and real maps.