• Journal of the Korea Safety Management & Science
• /
• v.24 no.4
• /
• pp.149-156
• /
• 2022

Manufacturing process mining performs various data analyzes of performance on event logs that record production. That is, it analyzes the event log data accumulated in the information system and extracts useful information necessary for business execution. Process data analysis by process mining analyzes actual data extracted from manufacturing execution systems (MES) to enable accurate manufacturing process analysis. In order to continuously manage and improve manufacturing and manufacturing processes, there is a need to structure, monitor and analyze the processes, but there is a lack of suitable technology to use. The purpose of this research is to propose a manufacturing process analysis method using process mining and to establish a manufacturing process mining system by analyzing empirical data. In this research, the manufacturing process was analyzed by process mining technology using transaction data extracted from MES. A relationship model of the manufacturing process and equipment was derived, and various performance analyzes were performed on the derived process model from the viewpoint of work, equipment, and time. The results of this analysis are highly effective in shortening process lead times (bottleneck analysis, time analysis), improving productivity (throughput analysis), and reducing costs (equipment analysis).

• Journal of the Korean Society of Safety
• /
• v.14 no.4
• /
• pp.93-99
• /
• 1999

A try was carried out to reduce lead time of die manufacturing. That is to make manual machining and finishing work time shorter by improving CAD/CAM modeling methods, so called with "separate modeling" and "relief modeling". The manual machining and finishing manual work time were reduced adapting the novel CAD/CAM modeling methods. Ultimately we accomplished much reduction of the lead time of die manufacturing.f die manufacturing.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1020-1023
• /
• 1996

Fieldbus provides real-time data communication among field devices in the process control and manufacturing automation systems. This paper presents an implementation method of Profibus in the experimental model of manufacturing automation system. The manufacturing automation system considered in this paper consists of robots, NC machines, sensors, conveyers and PCs. The application task programs are developed on the basis of FMS/FMA7 communication services which are provided by Profibus application layer. The communication and application programs are developed in the real-time environment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.701-706
• /
• 1994

Holonic manufacturing system is a new approachto the organization and architecture of decentralized, autonomous and cooperative manufacturing system. The new paradigm combines the concepts of hierarchical systems and the integration of autonomous elements in distributed system. Today's scheduling and control techniques are mostly based on a centralized structure. Only little work has been done on scheduling and control of decentralized, autonomous and cooperative manufacturing system. This paper proposes a new approach IPM(Interactive Prediction Method) for scheduling and control of holonic manufacturing system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.30
• /
• pp.167-175
• /
• 1994

Generally, queueing networks, networks, chains and simulation techniques are among the most widely used evaluation tools to study computer systems, manufacturing systems etc. But, these tools have some assumptions and difficulties. So, this thesis presents a method for manufacturing system using Petri nets. Petri nets are a graphical and mathmatical modeling tool and are promising tool for describing and studying systems that are characterized as being concurrent asychronous, dynamic, distributed and parrallel. It designs Petri net model for processing time of manufacturing system And it applied to a job shop system composed of 8 machines and 4 different job types.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.370-378
• /
• 2021

Purpose. The purpose of this study was to evaluate the currently published literatures investigating the accuracy of computer-aided design and computer-aided manufacturing removable partial denture (CAD-CAM RPD) framework with different manufacturing techniques and methods. Materials and methods. A comprehensive search for literatures was conducted in PubMed database using specific keywords with the patient, intervention, comparison, and outcome (PICO) question, "Is there a difference in accuracy of RPD frameworks manufactured using digital workflow according to the manufacturing process and methods?" Results. A total of 7 articles were selected. Two studies compared intraoral scanning and laboratory scanning for RPD frameworks and had heterogenous results. In the studies using different manufacturing process, RPD frameworks had clinically acceptable accuracy in both subtractive and additive manufacturing. Polyetheretherketone (PEEK)-milled RPD frameworks showed higher fit accuracy than traditionally casted or 3D printed RPDs. Direct milling method showed a higher accuracy than indirect milling method. However, in rapid prototyping, indirect method showed higher accuracy than direct method. Conclusion. The RPD frameworks fabricated using CAD-CAM technology showed a clinically acceptable level of accuracy regardless of manufacturing process or techniques. Consistent results have not been reported regarding the digital impression methods, which were intra oral scanning or laboratory scanning, and further studies are needed.

• Korean Management Science Review
• /
• v.10 no.2
• /
• pp.93-110
• /
• 1993

Since the manufacturing machines containing information processing capacity by development of ME technology are developed and distributed from the advanced nations, manufacturing automation with manufacturing method which keeps flexibility and productivity is supplied broadly. An introduction of manufacturing automation technology is necessary to solve difficult domestic industry environment due to international competitiveness weakness of products. The aim of this is to search for the successful factors of the manufacturing business which uses too much technology of manufacturing automation and to observe the difference of the successful factors which influence to introduction performance according to the introduction type of automation technology and the strategic type through the empirical analysis.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.2
• /
• pp.75-85
• /
• 2003

Manufacturing firms have adapted seriously the Design for Manufacture and Assembly (DFMA) techniques which consider concurrently all factors related to the product development by using effective communications and sharing of information on product development processes. This study performed modelling and characterizing the data related to product manufacturing information for Design for Manufacture(DFM) evaluation and analysis. It adapted component-based development method for communicating and managing manufacturing information among distributed manufacturing organizations. Introducing component-based development offers safety and speed to network based system. This development using Unified Modelling Language(UML) provides efficient way for reconstruction and distribution of applications. Also, the integration of database and component into the internet environment enables to communicate and manage effectively manufacturing information for DFM evaluation and analysis at any place in the world. Therefore this system can make it more reasonable that evaluating, analyzing, and effective decision making of product design using DFM technique.

• Journal of Technologic Dentistry
• /
• v.42 no.1
• /
• pp.9-16
• /
• 2020

Purpose: The purpose of this study was to compare the marginal and internal fit of lithium disilicate ceramic inlay produced by heat pressing that inlay pattern made by subtractive manufacturing and additive manufacturing method. Methods: A mandibular lower first molar that mesial occlusal cavity (MO cavity) die was prepared. After fabricating an epoxy resin model using a silicone impression material, epoxy resin die was scanned with a dental model scanner to design an MO cavity inlay. The designed STL pile was used to fabricate wax patterns and resin patterns, and then lithium disilicate ceramic inlays were fabricated using hot-press method. For the measurement of the marginal and internal gap of the lithium disilicate, silicone replica method was applied, and gap was measured through an optical microscope (x 80). Data were tested for significant differences using the Mann-Whitney Utest. Results: The marginal fit was 103.56±9.92㎛ in the MIL-IN group and 81.57±9.33㎛ in the SLA-IN group, with a significant difference found between the two groups (p<0.05). The internal fit was 120.99±17.52㎛ in the MIL-IN group and 99.18±6.65㎛ in the SLA-IN group, with a significant difference found between the two groups (p<0.05). Conclusion: It is clinically more appropriate to apply the additive manufacturing than subtractive manufacturing method in producing lithium disilicate inlay using CAD/CAM system.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.483-489
• /
• 2019

With development of digital dentistry, the 3-dimensional (3D) manufacturing industry using computer-aided design and computer-aided manufacturing (CAD/CAM) has grown dramatically in recent years. Denture fabrication using digital method is also increasing due to the recent development of digital technology in dentistry. The 3D manufacturing process can be categorized into 2 types: subtractive manufacturing (SM) and additive manufacturing (AM). SM, such as milling is based on cutting away from a solid block of materal. AM, such as 3D printing, is based on adding the material layer by layer. AM enables the fabrication of complex structures that are difficult to mill. In this case, additive manufacturing method was applied to the fabrication of the resin-based complete denture to a 80 year-old patient. During the follow-up periods, the denture using digital method has provided satisfactory results esthetically and functionally.