• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.85-91
• /
• 2022

The demand for electric vehicles has increased because of environmental regulations. The lithium-ion battery, the most widely used type of battery in electric vehicles, is composed of a cathode, an anode, and an electrolyte. It is manufactured according to the pole plate, assembly, and formation processes. To improve battery performance and increase manufacturing efficiency, the manufacturing process must be optimized. To do so, simulation can be used to reduce wasted resources and time, and a finite-element method can be utilized. For high simulation quality, it is essential to reflect the material properties of the electrode by considering the pores. However, the material properties of electrodes are difficult to derive through measurement. In this study, the representative volume element method, which is a homogenization method, was applied to estimate the representative material properties of the electrode considering the pores. The representative volume element method assumes that the strain energy before and after the conversion into a representative volume is conserved. The method can be converted into one representative property, even when nonhomogeneous materials are mixed in a unit volume. In this study, the material properties of the electrode considering the pores were derived. The results should be helpful in optimizing the electrode manufacturing process and related element technologies.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1998년도 춘계공동학술대회 발표논문집 IMF시대의정보화 추진전략
• /
• pp.129-135
• /
• 1998

The present automated manufacturing environment is very different when the classical statiscal process control method based on batch processing were used. Therefore these must be replaced by automated statiscal process control method. In this point of view , this study intends to develop the automated statiscal process control method which can be implemented in the proesent automated manufacturing environment . Specially this study suggested modified control limit line and developed the rule to identify the special cause of the manufacturing process in the aspect of the ppm manegement.

• 산업공학
• /
• 제14권1호
• /
• pp.20-29
• /
• 2001

This paper presents a concurrent design approach that deals with manufacturing cell formation and cellular layout in Cellular Manufacturing System. Manufacturing cell formation is to group machines into machine cells dedicated to manufacture of part families, and cellular layout problem determines layout of the manufacturing cells within shop and layout of the machines within a cell. In this paper, a concurrent approach for design of machine cell and cellular layout is developed considering manufacturing parameters such as alternative process plans, alternative machines, production volume and processing time of part, and cost per unit time of operation. A mathematical model which minimizes total cost consisting of machine installation cost, machine operating cost, and intercell and intracell movements cost of part is proposed. A hybrid method based on genetic algorithm is proposed to solve the manufacturing cell formation and cellular layout design problem concurrently. The performance of the hybrid method is examined on several problems.

• International Journal of Aerospace System Engineering
• /
• 제1권1호
• /
• pp.21-28
• /
• 2014

In this study, an investigation on mechanical properties of flax natural fiber composite is performed as a precedent study on the design of eco-friendly structure using flax natural fiber composite. The Vacuum Assisted Resin Transfer Molding-Light (VARTML) manufacturing method is adopted for manufacturing the flax fiber composite panel. The VARTML is a manufacturing process that the resin is injected into the dry layered -up fibers enclosed by a rigid mold tool under vacuum. In this work, the resin flow analysis of VARTM manufacturing method is performed. A series of flax composite panels are manufactured, and several kinds of specimens cut out from the panels are tested to obtain mechanical performance data. Based on this, structural design of chemical storage tank for agricultural vehicle was performed using flax/vinyl ester. After structural design and analysis, the resin flow analysis of VARTM manufacturing method was performed.

• 대한설비관리학회지
• /
• 제23권4호
• /
• pp.29-38
• /
• 2018

Through process quality information, the time required for process quality analysis has been drastically shortened, the process defect rate has been reduced, and the manufacturing lead time has been shortened and the on-time delivery rate has been improved. Therefore, The purpose of this study is to develop a quality information analysis system model that effectively shortens the time required for process quality analysis in automobile safety belt parts manufacturing process. As a result of experiments on communication operation between manufacturing execution system (MES) quality server, injection machine control computer, injection machine programmable logic controller (PLC) and terminal, in analyzing quality information, the conventional handwriting input method took an average of 20 minutes, but the new multi-network method took about 2 minutes on average. In addition, the process defect rate was reduced by 13% and the manufacturing lead time was shortened from 28 hours to 20 hours. The delivery compliance rate improved from 96 to 99%.

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.879-886
• /
• 2012

The ultrasonic horn used for bonding of flip chip has been designed to vibrate at a natural frequency. The ultrasonic horn must be manufactured accurately in physical terms, because the small change of mechanical properties may result in the significant change of natural frequency. Therefore, tight tolerance is inevitable to keep the natural frequency in acceptable range. However, since tightening of the tolerance increases the manufacturing cost significantly, trade-off between the cost and accuracy is necessary. In this research, an attempt was made to design the ultra sonic horn within acceptable natural frequency while the manufacturing cost was kept as low as possible. For this purpose, among the 18 tolerances of physical terms of the ultrasonic horn, the most important 4 factors were selected using Taguchi method. The equation to relate those main factors and the natural frequency was made using response surface method. Finally, optimal design scheme for minimum manufacturing cost without a loss of performance was determined using SQP method.

• 대한안전경영과학회지
• /
• 제9권3호
• /
• pp.15-19
• /
• 2007

This paper proposes a maintenance method to integrate worker's safety concerns into the process activities of the manufacturing system and it is to be considered as a part of the scope of maintenance engineering. The proposed method incorporates worker's health and safety considerations into maintenance engineering in each of the manufacturing process using reliability analysis. It can help to make a better planning and implementation of maintenance activities for the manufacturing system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.13-16
• /
• 2000

This paper developed a manufacturing method for resin magnet contained rare earth element and synthetic resin. Use this manufacturing method, developed a electro wave absorbent material and plant growth promote machine. Result of experiments shown to have excellent on bean sprouts cultivate, computer monitor, television monitor and cellular phone etc.

• 품질경영학회지
• /
• 제25권1호
• /
• pp.116-134
• /
• 1997

The present automated manufacturing environment is very different when the classical statistical process control method based on batch processing were used. Therefore these must be replaced by automated statistical process control method. In this point of view, this paper intends to develop the automated statistical process control method which can be implemented in the present automated manufacturing environment. Specially this study developed the rules to identify the special causes of the manufacturing process in the aspect of the 100 PPM management, and a numerical example is demonstrated to verify the usefulness of these rules.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.9-14
• /
• 2015

The Direct Metal Tooling (DMT) process is a kind of additive manufacturing processes, which is developed using various commercial steel powders, such as P20, P21, SUS420, and other non-ferrous metal powders. The DMT process is a versatile process that can be applied to various fields, such as the molding industry, the medical industry, and the defense industry. Among them, the application of the DMT process to the molding industry is one of its most attractive and practical applications, since the conformal cooling channel cores of injection molds can be fabricated at a slightly expensive cost by using the hybrid fabrication method of DMT technology compared with parts fabricated with machining technology. The main objectives of this study are to provide various characteristics of the parts made using the DMT process compared with the same parts machined from bulk materials and evaluate the performance of the injection mold equipped with a conformal cooling channel core fabricated using the hybrid method of the DMT process.