• Analytical Science and Technology
• /
• v.31 no.4
• /
• pp.149-160
• /
• 2018

A large number of functional living products are being produced for eco-friendly or health-promoting purposes. In the manufacturing process, such products could be adulterated with raw materials with high radioactivity, such as monazite and tourmaline. Thus, it is essential to manage raw materials and products closely related to the public living. For proper management, an accurate radioactivity data of the processed products are needed. Therefore, it is essential to develop a rapid and validated analytical method. In this study, the concentration of the radioactive $^{238}U$ and $^{232}Th$ in building materials (e.g., tile, cement, paint, wall paper, and gypsum board) and living products (e.g., health products, textiles, and minerals) were determined and compared by ED-XRF and ICP-MS. By comparing the results of both methods, we confirmed the applicability of the rapid screening and precise analysis of ED-XRF and ICP-MS. In addition, $^{238}U$ and $^{232}Th$ levels were relatively lower in building materials than in living products. Particularly, $^{232}Th$ content in 6 of 47 living products exceeded (maximum $8.2Bq{\cdot}g^{-1}$) the standard limit of $^{232}Th$ content in raw material ($1.0Bq{\cdot}g^{-1}$).

• Korean Journal of Food Science and Technology
• /
• v.50 no.4
• /
• pp.407-413
• /
• 2018

The current study reviews the manufacturing characteristics, upon aging, using different distillation methods with Saccharomyces cerevisiae 88-4 isolated from traditional Nuruk. The alcohol content slightly decreased at 180 days of aging period, under the conditions: -60 cmHg, distilling temperature $50^{\circ}C$, head cut 7%, and body cut 30%. The alcohol content decreased by 2.2% at: -50 cmHg, distilling temperature $60^{\circ}C$, head cut 7%, and body cut 30%. From 2-thiobarbituric acid (TBA) analysis, the TBA values were not found to change significantly in most of the alcohols, but increased at conditions of: -60 cmHg, distilling temperature $60^{\circ}C$, head cut 7%, and body cut 50% and -50 cmHg, distilling temperature $50^{\circ}C$, head cut 7%, and body cut 50%, when initial alcohol levels were low. According to n-propanol, iso-butanol, and isoamyl alcohol analysis, with increasing aging period, the n-propanol and isoamyl alcohol content did not change, although that of iso-butanol decreased. The flavor components showed different results based on the aging period. Results of sensory evaluation showed no significant difference based on aging. The sensory evaluation test was continued for 180 days at a condition of: -60 cmHg, distilling temperature $60^{\circ}C$, and body cut 50%, which had the best overall evaluation ($5.8{\pm}0.9$).

• Korean Journal of Remote Sensing
• /
• v.33 no.5_1
• /
• pp.587-598
• /
• 2017

Volcanic ash is a fine particle smaller than 2 mm in diameters. It falls after the volcanic eruption and causes various damages to transportation, manufacturing industry and respiration of living things. Therefore diffusion information of volcanic ash is highly significant for preventing the damages from it. It is advantageous to utilize satellites for observing the widely diffusing volcanic ash. In this study volcanic ash diffusion information about two eruptions of Mt. Sakurajima were calculated using the geostationary satellite, Communication, Ocean and Meteorological Satellite (COMS) Meteorological Imager (MI) and polar-orbiting satellite, Landsat-8 Operational Land Imager (OLI) and the Thermal InfraRed Sensor (TIRS). The direction and velocity of volcanic ash diffusion were analyzed by extracting the volcanic ash pixels from COMS-MI images and the height was retrieved by adjusting the shadow method to Landsat-8 images. In comparison between the results of this study and those of Volcanic Ash Advisories center (VAAC), the volcanic ash tend to diffuse the same direction in both case. However, the diffusion velocity was about four times slower than VAAC information. Moreover, VAAC only provide an ash height while our study produced a variety of height information with respect to ash diffusion. The reason for different results is measured location. In case of VAAC, they produced approximate ash information around volcano crater to rapid response, while we conducted an analysis of the ash diffusion whole area using ash observed images. It is important to measure ash diffusion when large-scale eruption occurs around the Korean peninsula. In this study, it can be used to produce various ash information about the ash diffusion area using different characteristics satellite images.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.11
• /
• pp.1660-1665
• /
• 2010

To obtain data for the standardization of manufacturing method of red ginseng extract pouch products, saponin and physico-chemical properties of 44 Korean red ginseng extract pouch products were analyzed. The concentration of total ginsenoside contents were 5.5~185.7 mg/100 mL. Distribution of the contents of ginsenoside $Rg_3$, $Rg_2$, $Rh_1$, and $Rh_2$ known to have anticancer effect are as follows: $Rg_3$ is 1.6~46.3 mg/100 mL, $Rg_2$ is 0~22.0 mg/100 mL, $Rh_1$ is 0~4.3 mg/100 mL and that of $Rh_2$ is 0~20.4 mg/100 mL, respectively. The anti-diabetic effect of ginsenoside $Rb_2$ and Re distribution of contents were 0~10.8 mg/100 mL and 0~7.0 mg/100 mL, respectively. Among the other saponins, exhibited content to distribution of ginsenoside $Rb_1$ was 0~25.2 mg/100 mL, Rc was 0~12.5 mg/100 mL, Rd was 0~11.3 mg/100 mL, Rf was 0~5.9 mg/100 mL and $Rg_1$ was 0~4.4 mg/100 mL. Results of physicochemical characterization showed total sugar content of 226.6~3,102.9 mg/100 mL, total soluble solids content $1.4\sim9.5^{\circ}Bx$, turbidity 82.2~100.0%, pH in the range of 4.1 to 5.0, respectively. In approximately 50% of collected domestic ginseng extract pouch products (21~24 items), ginsenoside $Rb_1$, $Rb_2$, Rc, Rd, Re and $Rg_1$ were not detected, and saponin content of each product appears to differ greatly. Results indicated that standardization of production methods and standards set for red ginseng extract pouch products in Korea is needed.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.1
• /
• pp.24-30
• /
• 2011

BACKGROUND: High input to the arable land is contributed to increasing productivity with causing the global environmental problems at the same time. Rapeseed cultivation has been forced to reassess its positive point for utilization of winter fallow field. The Objective of this study was performed to assess the environmental impact of rapeseed cultivation with double-cropping system in paddy rice on Yeonggwang district using life cycle assessment technique. METHODS AND RESULTS: For assessing each stage of rapeseed cultivation, it was collected raw data for input materials as fertilizer and pesticide and energy consumption rate by analyzing the type of agricultural machinery and working hours by 1 ton rapeseed as functional unit. Environmental impacts were evaluated by using Eco-indicator 95 method for 8 impact categories. It was estimated that 216 kg $CO_2$-eq. for greenhouse gas, 3.98E-05 kg CFC-11-eq. for ozone lazer depletion, 1.78 kg SO2-eq. for acidification, 0.28 kg $PO_4$-eq. for eutrophication, 5.23E-03 kg Pb-eq. for heavy metals, 2.51E-05 kg B(a)p-eq. for carcinogens, 1.24 kg SPM-eq. for smog and 6,460 MJ LHV for energy resource are potentially emitted to produce 1 ton rapeseed during its whole cultivation period, respectively. It was considered that 90% of these potential came from chemical fertilizer. For the sensitivity analysis, by increasing the productivity of rapeseed by 1 ton per ha, potential environmental loading was reduced at 22%. CONCLUSION(s): Fertilization affected most dominantly to the environmental burden, originated from the preuse stage, i.e. fertilizer manufacturing and transporting. It should be included and assessed an indirect emission, which is not directly emitted from agricultural activities. Recycling resource in agriculture with reducing chemical fertilizer and breeding the high productive variety might be contribute to reduce the environmental loading for the rapeseed cultivation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.1
• /
• pp.132-137
• /
• 2010

This study was performed to investigate the effect of apple and maltitol as ingredients on the quality of Jochung, a grain syrup. Four kinds of Jochung products were prepared from steamed-rice, apple juice, heated-apple sarcocarp (at $70^{\circ}C$, 60 min), and a mixture (sarcocarp : maltitol＝5:1, w/w) by saccharifying (at $55^{\circ}C$, 8 hrs) with a malt (100 g/500 g rice), mixing the ingredients (steamed-rice : ingredient＝5:5, w/w), filtering, and heating the filtrate (at $95^{\circ}C$, 2 hrs): product (A) with apple juice added before saccharified, product (B) with apple juice added after saccharified, product (C) with heated-apple sarcocarp added after saccharified, and product (D) with the mixture added after saccharified. The product (D) had the lowest pH value ($4.60\pm0.01$) of any other products. The contents of reducing sugar and total phenolic compound were the highest in the product (A) among all the products, which comprised $68.10\pm6.71$% and $7.36\pm0.85$ mg/g, respectively, resulting in good quality. The solidity and the dextrose equivalence had the highest value in the product (B) and the product (C), respectively. The malic acid content ($4.10\pm0.02$%) of the product (D) was the highest of any other organic acids identified by HPLC. Hunter L, a, and b values of the product (D) were the highest compared to other products. In sensory evaluation, the product (A) had generally higher score in all sensory attributes. It was concluded from the chemical and sensory evaluation that adding the apple juice before saccharified might be an effective method for manufacturing good quality rice-Jochung.

• Composites Research
• /
• v.15 no.4
• /
• pp.23-31
• /
• 2002

The two dimensional size effect of specimen gauge section ($length{\;}{\times}{\;}width$) was investigated on the compressive behavior of a T300/924 $\textrm{[}45/-45/0/90\textrm{]}_{3s}$, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm{\;}and{\;}90mm{\;}{\times}{\;}90mm$ gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• Cartoon and Animation Studies
• /
• s.24
• /
• pp.223-246
• /
• 2011

Today, cultural content industry could be defined to service business rather than manufacturing business because of its own trait. Also, it has the realistic restriction that it can't hold the dominant position in the market competition when it can't provide consumers satisfaction regardless of its quality or degree of completion. In other word, it can only expect great success when the business plan and the activities get the perfect balance with its best quality and perfect of completion. As the result, it emphasizes the importance of business competition in the global market. In briefly, there is no doubt that the creativeness of content is very important in the cultural content industry but in the future, making system to maintain the distribution process and share the profits fairly will be taken more important role. Especially, animation genre has the feature, which compares to other genres, such as film or TV drama, would be free from cultural barriers, and it is a great advantage. So to speak, animation can get little influence from cultural discount. However, Korean animation can't use the advantage properly for the foreign distribution because of its poor infrastructure and short of professional human resources. For those reasons, it has been needed to set up the realistic and specific action plan to overcome the situation. Therefore, considering those needs and the situations of Korean animation facing, making B2B online marketplace could be a great solution. The online marketplace stands for taking more efficient and broad distribution channel instead of the passive way, which we have now. If we have the B2B online marketplace, we can share all the information about the Korean animation with the potential customers whom live outside of Korea at real time. It also could be use to the windows of multiple distribution, which can make additional profits and activate the optional markets for the Korean animation. Through the method, Korean animation would be expected to get the higher international competitiveness, and it would be developed in quality and quantity of the business. Finally, it would be a great chance to Korean animation, which can get the unique brand power by improving the backward distribution circumstances.

• Journal of Animal Science and Technology
• /
• v.49 no.1
• /
• pp.109-120
• /
• 2007

CLA was chemically synthesized by alkaline isomerization method using corn oil. CLA-TG was synthesized by chemical reaction using sodium methoxide. For the control, 10% of back fat among the total component was only added without the annex of CLA-TG. For the first treatment, 5% of CLA-TG among the lard component added into the press ham was replaced. For the 2nd, 3rd and 4rd treatments, 10%, 15% and 20% of CLA-TG was respectively replaced. Manufacture press ham using CLA-TG were vacuum packaged and then stored during 1, 7, 14, 21 and 28 days at 4℃. Samples were analyzed for shear force value, sensory evaluation, TBARS, fatty acid composition and CLA content. Shear force value of control was significantly higher than that of CLA-TG treatment groups(P<0.05). All treatments were increased by the passage of storage time. No remarkable differences were found in sensory properties among control and CLA-TG treatment groups. CLA-TG treatment groups showed significantly(P<0.05) lower TBARS value than the control. TBARS value was increased significantly during storage in all treatment. In the change of fatty acid composition, the contents of C14:0～C20:4 were decreased significantly by CLA-TG additive. Whereas the increase level of CLA-TG additive resulted in the significantly higher unsaturated fatty acid and CLA content. Summing up the a forementioned results, press ham manufacturing with CLA-TG additive was not affected in sensory evaluation. Also, it may be assumed that the high quality press ham can be manufactured with the extent of storage period and CLA accumulation.

• Microbiology and Biotechnology Letters
• /
• v.37 no.4
• /
• pp.377-382
• /
• 2009

Viral safety is an important prerequisite for clinical preparations of all biopharmaceuticals derived from plasma, cell lines, or tissues of human or animal origin. To ensure the safety, implementation of multiple viral clearance (inactivation and/or removal) steps has been highly recommended for manufacturing of biopharmaceuticals. Of the possible viral clearance strategies, Ultraviolet-C (UVC) irradiation has been known as an effective viral inactivating method. However it has been dismissed by biopharmaceutical industry as a result of the potential for protein damage and the difficulty in delivering uniform doses. Recently a continuous flow UVC reactor (UVivatec) was developed to provide highly efficient mixing and maximize virus exposure to the UV light. In order to investigate the effectiveness of UVivatec to inactivate viruses without causing significant protein damage, the feasibility of the UVC irradiation process was studied with a commercial therapeutic protein. Recovery yield in the optimized condition of $3,000\;J/m^2$ irradiation was more than 98%. The efficacy and robustness of the UVC reactor was evaluated with regard to the inactivation of human immunodeficiency virus (HIV), hepatitis A virus (HAV), bovine herpes virus (BHV), bovine viral diarrhea virus (BVDV), porcine parvovirus (PPV), bovine parvovirus (BPV), minute virus of mice (MVM), reovirus type 3 (REO), and bovine parainfluenza virus type 3 (BPIV). Non enveloped viruses (HAV, PPV, BPV, MVM, and REO) were completely inactivated to undetectable levels by $3,000\;J/m^2$ irradiation. Enveloped viruses such as HIV, BVDV, and BPIV were completely inactivated to undetectable levels. However BHV was incompletely inactivated with slight residual infectivity remaining even after $3,000\;J/m^2$ irradiation. The log reduction factors achieved by UVC irradiation were ${\geq}3.89$ for HIV, ${\geq}5.27$ for HAV, 5.29 for BHV, ${\geq}5.96$ for BVDV, ${\geq}4.37$ for PPV, ${\geq}3.55$ for BPV, ${\geq}3.51$ for MVM, ${\geq}4.20$ for REO, and ${\geq}4.15$ for BPIV. These results indicate that UVC irradiation using UVivatec was very effective and robust in inactivating all the viruses tested.