• Title/Summary/Keyword: manufactures

Search Result 536, Processing Time 0.021 seconds

A Study on the Current Nutrition Labelling Practices for Processed Foods (시판 가공식품의 영양표시 실태조사)

  • 이현정;정해랑;장영애
    • Korean Journal of Community Nutrition
    • /
    • v.7 no.4
    • /
    • pp.585-594
    • /
    • 2002
  • This study examined the status of current nutrition labelling and claims for the processed foods that were purchased in the supermarket. They were assessed in the aspects of frequency and content of nutrition labelling and claims. The results are summarized as follows; The percentage of products contain the nutrition labelling or claims of processed foods of investigation were 18.7% and 18.8% respectively. In the nutrition labelling method, the format separated by expression contents with 'only liability indication nutrient'or 'liability indication nutrients plus discretion indication nutrients' were 44.7% and 43.4% respectively. In the case of type and title, 'table' and 'nutrition composition'were used most frequently, 83.9% and 83.2% respectively. And in the case of expression unit, 'per 100 g or 100 ml'was higher (56.8%) than others. Nutrition claims were divided into 'nutrition content claim'and 'comparative claim', in the former the most claim was 'containing'and in the other'more or plus'used most frequently.'Nutrient function claim'was 13.4% and 'Implied nutrient claim'was 7.3% of all the claims. Results of the evaluation of current nutrition labeling system, nutrition labelling was less advanced and variable in content and format and also the information was not easy for consumers to understand and use them. To support achievement of the nutrition label, there must be program and initiatives for better understanding and communication and guidances on food labelling and nutrition for food manufactures.

The properties of cement mortar using waste pottery powder (폐도자기분말의 혼입에 따른 시멘트 모르타르의 특성)

  • Lee, Hwa-Young;Kim, Deuck-Mo;Mun, Kyoung-Ju;So, Seung-Young;Soh, Yang-Seob
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.04a
    • /
    • pp.785-788
    • /
    • 2008
  • Ceramics manufactures in the nation produced more than 5,000 tons of waste pottery a year increasing industrial waste quantity. However, Almost researches were made to reduce environmental pollution and recycle waste ware. It is needed that they are used as recycled materials in order to prevent environmental pollution and gain economic profits. Therefore, the purpose of this study is to present the method of utilizing the recycled cements that are obtained from waste pottery. The test results that replacement of waste pottery powder by cement admixture at the level 10% had effect on the stripping strength(compressive strength). Also, When GBFS and WP used by cement admixture, WP is better than GBFS.

  • PDF

A study on the Insulation Condition Evaluation and Insulation Reinforced Method of Large Motors (대형모타 절연상태 판정기준 및 절연보강 방안 연구)

  • Kim, Young-Kyu;Park, Duk-Kyu;Song, Young-Cheol;Kim, Hyeon-Il
    • Proceedings of the KIEE Conference
    • /
    • 2000.07c
    • /
    • pp.1912-1914
    • /
    • 2000
  • This is the first report of a series of field test result of large high voltage generator & motors. Major specimens were 6.6/13.2kV class hydroric power & pump motor that was installed and operated for public water service by KOWACO(KOrea WAter resources COperation). The capacity of specimen gene rater & motors were in range of several hundred kVA$\sim$50MVA. Until now, we get the 100 field test result by testing technique discribed in IEEE standards and Discharge map technique from Japanse manufactures. The test result was varied very wide range, and there was a tendency according to insulation material and manufacture.

  • PDF

Method for Selecting a Smart Television Product Model Using AHP (AHP를 이용한 스마트TV 제품모델 선정 방법)

  • Byun, Dae-Ho
    • Journal of Digital Convergence
    • /
    • v.12 no.3
    • /
    • pp.69-77
    • /
    • 2014
  • Because smart televisions (TVs) have various and innovative functions that are different from traditional TVs, consumers are front with a complex decision-making problem when they want to buy a best TV among alternatives made by many TV makers. TV manufactures have developed and announced different types of smart TV models and they need a comparative study for evaluating their characteristics. In this paper, we suggest the Analytic Hierarchy Process(AHP) method for deciding the best smart TVs regarding many selection criteria. The method provides a decision support for consumers who like to purchase a smart TV. We describe criteria affecting the smart TV selection through a literature review and suggest a user testing method in order to derive accurate judgments from consumers. Using the Expert Choice software package, we show a an numerical example how the priority of smart TVs are computed.

The Effects of Logistics Equipments Standardization on Business Performance (국내물류기기 표준화가 기업성과에 미치는 영향에 관한 연구)

  • 박형남;김원중
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.22 no.52
    • /
    • pp.155-170
    • /
    • 1999
  • I think that there are few domestic enterprises that recognize standardization of logistics equipments is necessary, which causes a lot of waste in costs and also reduces their business competitiveness. The purpose of this paper is to make the companies be aware of this situation, to exactly analyze where the Korean logistics equipments status are, and further to provide practical directions of methods and activities for effective standardization. Through analysis in the study, there were some findings, as listed below. First, the standardization level of each company varies depending on its own corporate characteristics. Second, if a company adopted standardization process in logistics equipments, it would accelerate process of work efficiency or productivity. Third, when logistics equipment are standardized, it would boost efficiency in storage utilization. Fourth, the delivery services through this standardized logistics would be implemented at a higher speed than before due to the accelerated flow of materials. According to the above findings, it is confirmed that logistics standardization would greatly affect on business performance positively. For the domestic manufactures to facilitate logistics system more easily, as an easiest way, it is required to build logistics standardization teams and surveys. Then afterwards, to achieve it earlier than expected, the company-wide education and training for workers have to be followed to let them be aware of necessity and inevitability about standardized logistics.

  • PDF

A Study on the Demand Research for Facilities of Logistics from Factor Comparison (요인비교법을 통한 물류시설 수요조사에 관한 연구)

  • Yoon, Tomes;Kim, Tae-Seok;Lee, Geon-Su;Kang, Kyung-Sik
    • Journal of the Korea Safety Management & Science
    • /
    • v.9 no.5
    • /
    • pp.103-110
    • /
    • 2007
  • To build a most efficient and competitive warehouse, need to reflect tenants various opinions in advance such as location, rentable size, leasing terms, rental, configuration of the building, building structure, traffic flow and amenities. Thus a survey for major tenants which are logistics, retailers and manufactures should be done to figure out potential demand and marketing strategy to lead to be a competitive warehouse. However above survey is time consuming work and requires high cost involvement thus to avoid such an inefficient process and to facilitate investors prompt and right decision making, there should be a tool which helps to make a decision process easier with simple key factors. In other word, we have used above mentioned 'Demand Approach' so far but here I am introducing 'Factors Comparison' which reflects location factors and facility factors. I derived Kwang-myung logistics park's proper rental rate through 'Demand Approach' which analyzed Seoul Metropolitan area's rental warehouse status and rents, and also defined a size of potential demand area and rental. And this report compared the result with an outcome of 'Factors Comparison' then compared each methods and drew a conclusion of 'Factors Comparion's better convenience and efficiency.

SCP-Matrix based shipyard APS design: Application to long-term production plan

  • Nam, SeungHoon;Shen, HuiQiang;Ryu, Cheolho;Shin, Jong Gye
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • v.10 no.6
    • /
    • pp.741-761
    • /
    • 2018
  • A shipyard is an Engineer To Order (ETO) company that designs and manufactures new products when orders are placed. Various tasks are concurrently performed, thereby making process management considerably important. It is particularly important to plan and control production activities because production constitutes the largest part of the overall process. Therefore, this study focuses on the development of a production planning system based on an Advanced Planning System (APS). An APS is an integrated planning system that targets supply chain processes in accordance with the principles of hierarchical planning. In this study, a Supply Chain Planning Matrix (SCP-Matrix), which is used as a guideline for APS development, is designed through analysis of shipyard cases. Then, we define the process in detail, starting from long-term production plan as the initial application, and design and implement a long-term production planning system using a component-based development.

A Study on Resin Flow to Make a Replica Using a Silicone Mold

  • Bae, Kum-Soo;Rhee, Sang-Yong;Kim, Young-Baek
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • v.8 no.2
    • /
    • pp.94-99
    • /
    • 2008
  • The replica of silicone mold which can produce the test samples and the market-displayable products without making expensive metallic patterns is advantageous because it incurs less cost than the ordinary method that manufactures the products from the metallic patterns. However, the production of the products using silicone mold should require a technician with professional knowledge about the metallic patterns every time. Thus we tried to judge whether a forming analysis software for iron molding can be applied to silicon molding in this paper. In other words, this paper suggests a method to use a computer simulator from the designing step of the silicone mold, which is the most important part in making replica using simple silicone molds to the step of pouring the cast. The paper shows that if the know-how of a professional worker is provided in advance, an amateur worker can easily produce silicone molds of the best quality, the defective rate of the products will be decreased, and the replica will have a more complete status. By doing so, we suggested a possibility for reducing the delivery time at the production sites and for improving the product quality.

The Emulsification of Silane as Water REpellent for Concrete (콘크리트 발수제용 Silane의 유화)

  • 황인동;염희남;정윤중
    • Journal of the Korean Ceramic Society
    • /
    • v.37 no.8
    • /
    • pp.760-767
    • /
    • 2000
  • Recently, the protection of construction is demanded with environmental pollution. These protect modes are use of concrete admixture, coat of protective polymer and impregnate of surface with chemicals etc. The most widely used impregnation is economical and effective. The define of Impregnation for construction protect is reacted in and consolidated substrate after absorbed. The impregnation agents are Polyesters, Acrylic monomers, Epoxy and Silicone derivatives. Commonly, because the Silane has good water repellency and environmental advantages that it widely used to water proofing agents, dampproofing agents and absorption reducer for concrete of bridges. When application of Silane, it occurs pollution and harmfulness as included organic solvent. The manufactures have tired to emulsification of Silane for the reducing of the defects. The Silane emulsion is vary unstable and does not stored long periods, and it is diminished in good properties with internal reaction. In this study we tried to emulsification of Silane for effectiveness improvement and reduce pollution and hazard and discussed properties variation of emulsion. The Silane emulsions are achieved emulsifying with W/O and O/W type surfactants. It used 0.24% PVA as protective colloid and stable phase is creamy. The creamy Silane emulsion performance as the penetration depth and water absorption rate are above 4 mm and below 0.1. It stable about 6 month at room temperature.

  • PDF

Clothes Manufacture Systems Design and Embodiment for 3D Clothes Getting Dressed Simulation (3D 의복 착의 시뮬레이션을 위한 의복 제작 시스템 설계 및 구현)

  • Kim Young-Un;Cho Jin-Ei;Lee Yong-Ju;Jung Sung-Tea;Joung Suck-Tea;So In-Mi
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.7 no.1
    • /
    • pp.57-62
    • /
    • 2006
  • This treatise proposes a develop system that manufactures 3D clothes model who is used in 3D clothes getting dressed simulation. Need 3D human body model and 3D clothes model to do getting dressed simulation. Create priority work Matrix javelin to design clothes model and design 2D piece from designer Connect designed piece plain using backstitch line and create numerical value data because using designed piece and backstitch data finally and make 3D clothes model. Consist of piece design module, to read clothes data and save module, getting dressed simulation module in system that propose in this treatise.

  • PDF