• Journal of Korean Physical Therapy Science
• /
• v.10 no.2
• /
• pp.236-245
• /
• 2003

As one of the effective therapies for musculoskeletal diseases, orthopedic manual physical therapy has been watched with keen interest. In Korea, orthopedic manual physical therapy has been widely spread and applied in the field of clinical medicine since the mid-nineties. Since then, the clinical efficacy of orthopedic manual physical therapy has been approved, and orthopedic manual physical therapy has been gradually spread in the filed of clinical medicine. However, it should be noted that clinically available therapies are not well recognized. Therefore, this study was conducted to allude diagnostic and therapeutic characteristics of these therapies including deep tissue massage, manual therapy, Cyriaxs method combining manual reduction and chemotherapy, Kaltenborn-Evjenth method based on concave-convex rule for joint and soft tissue, Maitlands method based on patients sign and symptom, stress due to the posture, intraarticualr disturbance and Mckenzies method for pain due to the dysfunction.

• Journal of dental hygiene science
• /
• v.17 no.3
• /
• pp.267-274
• /
• 2017

This study aimed to compare the effectiveness of chewable toothbrush and manual toothbrush and provide basic data for recommendation of the chewable toothbrush in specific groups and situations. A total of 20 subjects participated in this study (rolling method, 10; non-rolling method, 10). After professional prophylaxis, participants used the manual toothbrush to brush their teeth for 3 minutes. After a 7-day wash-out period, participants used the chewable toothbrush according to the manufacturer's instructions. Pre- and post-plaque indexing of the teeth was performed. The dental plaque index was assessed using the Turesky Modification of the Quigley-Hein Plaque Index (TMQHPI) for amount of plaque and Silness-Loe Plaque Index (SLPI) for plaque thickness. The difference between pre- and post-dental plaque index was analyzed using a paired t-test and the Wilcoxon signed-rank test. The Mann-Whitney U test was also used to compare the dental plaque index reduction rates. The dental plaque index differed significantly between the chewable toothbrush and the manual toothbrush. The TMQHPI reduction rate was significantly different between the rolling and non-rolling method groups for the manual toothbrush but not the chewable toothbrush. The difference in SLPI reduction rate between the rolling and non-rolling method groups was significant for the manual toothbrush but not for the chewable toothbrush. Differences in the dental plaque index reduction rates between the chewable and manual toothbrushes were not significant in the non-rolling method group. The results of this study showed higher reduction rates in dental plaque with manual toothbrush use than with chewable toothbrush use. However, the non-rolling method group did not show statistically significant differences according to toothbrush type. The present study showed that a chewable toothbrush can be an alternative to a manual toothbrush for individuals who have difficulty using the generally recommended rolling method.

• Journal of Radiation Industry
• /
• v.12 no.4
• /
• pp.317-324
• /
• 2018

The results of bone mineral density analysis using DXA were compared between automatic and manual methods. The purpose of this paper is to verify the range of errors of each analysis method in the same patient and select a proper method to minimize errors. Comparisons between automatic and manual analysis methods were made using BMD, BMC and AREA. Basal and follow up examinations were performed with the patients of normal, osteopenia and osteoporosis. In the basal examinations, the precision errors between automatic and manual method showed 1.9% in normal, 3.1% in osteopenia and 3.8% in osteoporosis. In case of follow up studies, the precision errors between automatic and manual method showed 2.3% in normal, 3.2% in osteopenia and 3.5% in osteoporosis. BMC and AREA also showed a tendency to increase precision errors on osteopenia and osteoporosis. Therefore, a manual method would be a better option to minimize errors in patients with osteopenia and osteoporosis.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.18 no.2
• /
• pp.9-21
• /
• 2012

Background: The purpose of this study was to analysis and to give information about the type of orthopedic manual physical therapy research by KAOMPT Journal from 1995 (Volume 1) to 2011 (Volume 17). The number of research paper were total 212 studies. Method: The studies were analysed with retrospective descriptive study. The results of data analysis was as follow; Results & Conclusion: 1. The studies was analysed 6 study field; manual therapy for disease field (130 studies), the therapeutic (16 studies), the effects of manual therapy education method, learning model (7 studies), medical insurance, history, politics of manual therapy (3 studies), and others (19 studies). 2. In the manual therapy of disease field, there were 4 groups of disease; bone disease (43 studies), soft tissue and muscles disease (57 studies), nerve disease(24 studies), and the others (6 studies). The main disease were low back pain, stroke, HIVD. 3. In the assessment, and intervention field, there were only 5 studies during from 1995 to 2000, but the studies from 2001 to 2011 were more increased 21 studies. 4. In the effects of manual therapy education method, learning model, there were very few studies (7 studies), so it will be needed more studies in this field. 5. In the other fields such as more political issue, history, medical insurance for the manual therapy there were few studies, so it will be needed more advanced studies in this field.

• Korean Journal of Microbiology
• /
• v.43 no.3
• /
• pp.210-216
• /
• 2007

The principal objective of this study was to analyze 16S rDNA-ARDRA of the humus forest soil via an improved manual method and an ISOIL kit on the basis of the UPGMA clustering of the 16S rDNA combined profile, 44 ARDRA clusters of 76 clones via the ISOIL kit method and 45 ARDRA clusters of 136 clones via the improved manual method. On the basis of the 16S rDNA sequences, 44 clones from the ARDRA clusters by the ISOIL kit were classified into 3 phyla : ${\alpha}-,\;{\beta}-,\;{\gamma}-,\;{\delta}-Proteobacteria$, Acidobacteria and Actinobacteria. Using the improved manual method, the specimens were classified into 6 phyla : the ${\alpha}-,\;{\beta}-,\;{\gamma}-,\;{\delta}-Proteobacteria$, Acidobacteria, Bacteroides, Verrucomicrobia, Planctomycetes and Gemmatomonadetes. As a result, the modified manual method indicated greater phylogenetic diversity than was detected by the ISOIL kit. Approximately 40 percent of the total clones were identified as ${\alpha}-Proteobacteria$ and 30 percent of the total clones were ${\gamma}-Proteobacteria$ and assigned to dominant phylogenetic groups using the ISOIL kit. Using the modified manual method, 41 percent of the total clones were identified as Acidobacteria and 28 percent of total clones were identified as ${\alpha}-proteobacteria$ and assigned to dominant phylogenetic groups.

• Journal of the Ergonomics Society of Korea
• /
• v.20 no.3
• /
• pp.27-35
• /
• 2001

The measurement of the fermoral anteversion is an important factor in the practice of orthopedic surgery. The anteversion is measured by means of the axis of head and neck of the femur. In this study. widely used computed tomography method of measuring anteversion was tested on femoral necks of patients. Measurement by the manual method and image viewer of computed tomography to determine the anteversion of femoral head were carried out on both femurs. In January and February 2001, 30 patients 3 to 6 years of age were randomly selected from Seoul National University Hospital. the purpose of this paper was to introduce a new method to measure femoral anteversion angle utilizing image viewer program. This new method was more accurate and convenient than the conventional manual method. No significant difference was observed between the manual method and the image viewer measurement of femoral anteversion. In conclusion, image viewer program was statistically more reliable in determining the angle of the fermoral anteversion.

• Physical Therapy Korea
• /
• v.20 no.3
• /
• pp.54-61
• /
• 2013

This study was to determine the reliability and validity of manual measurements of patellar height to standard radiographic measurements in 30 knees of 15 subjects. Patellar height was measured using manual and radiographic methods. The manual measurements were performed by two examiners using digital vernier calipers with the subject sitting and the knees in $30^{\circ}$ of flexion. The radiographic measurements were performed in the same position. The reliability of the manual measurements was assessed by means of intraclass correlation coefficients [ICC(3,1)], and the validity was investigated using the Pearson's product-moment correlation coefficient and an independent t-test. The intra- and inter-rater reliabilities of the manual measurement of patellar height were excellent (ICC=.86 and .88 respectively). The validity of patellar height measured manually compared to the radiographic method was good (Pearson's r=.69). In conclusion, the manual method is an objective, qualitative measurement of patella height.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.198-199
• /
• 2015

In Korea, it raised the need of the specification of unit modular construction, because there are no standard or manual. And it is urgent that the specification of unit modular construction is needed to develop in the domestic. Therefore, this study aims to propose the manual framework of the construction method. In the future, this framework will be based on the development of the manual on the unit modular construction method.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.63-66
• /
• 2009

Purpose: ACR (American College of Radiology) offers variable parameters to PET/CT quality control by using ACR Phantom. ACR Phantom was made to evaluate parameters which are uniformity, attenuation, scatter, contrast and resolution. Manual analysis method wasn't good for the use of QC because values of parameter were changed as it may user and it takes long time to analysis. Ki-Chun Lim, a nuclear scientist in AMC, developed program that automatically analysis values of parameter by using ACR Phantom to overcome above problems. In this study, we evaluated automatic analysis program's usability, through the comparing SUV of each method, reproducibility of SUV when repeated analysis and the time required. Materials and Methods: Using Flangeless Esser PET Phantom, the ideal ratio of 4 : 1 hot cylinder and BKG but it actually showed a ratio of 3.89 to 1 hot cylinder and BKG. SIEMENS Biograph True Point 40 was used in this study. We obtained images using ACR phantom at Fusion WB PET Scan condition (2 min/bed) and 120 kV, 100 mAs CT condition. Using True X method, 3 iterations, 14 subsets, Gaussian filter, FWHM 4 mm and Zoom Factor 1.0, $168{\times}168$ image size. We obtained Max. & Min. SUV and SUV Mean values at Cylinder (8, 12, 16, 25 mm, Air, Bone, Water, BKG) by automatic program and obtained SUV by manual method. After that, we compared manual and automatic method. we estimate the time required from opened the image data to final work sheet was completed. Results: Automatic program always showed same result and same the time required. At 8, 12, 16 and 25 m cylinder, manual method showed 6.69, 3.46, 2.59, 1.24 CV values. The larger cylinder size became, the smaller CV became. In manual method, bone, air, water's CV were over 9.9 except BKG (2.32). Obtained CV of Mean SUV showed BKG was low (0.85) and bone was high (7.52). The time required was 45 second, 882 second respectably. Conclusions: As a result of difference automatic method and manual method, automatic method showed always same result, manual method showed that the smaller hot cylinders became, the lager CV became. Hot cylinders mean region size, the smaller hot cylinder size becomes we had some trouble in doing ROI poison setting. And it means increase in variation of SUV. The Study showed the time required of automatic method was shorten then manual method.

• Journal of Oriental Neuropsychiatry
• /
• v.3 no.2
• /
• pp.97-106
• /
• 1992

The literature which was written about manual technique of 'Four method of conducting the Qi(氣)'suggest the following results. 1. Four method of conducting the Qi(氣) is a total method based on the basic manual method, lifing and thrusting, twisting and rotating(捻轉), timing the insertion and withdrawal(呼吸) ect. 2) Cheongryongphami method(靑龍擺尾法) come to understanding channels and conducting and Qi(氣), Paekhoyodu method(白虎搖頭法) using a channels understanding and Qi(氣) introducing, Changkuthamhyeol method(蒼龜探穴法) using a channels understanding, Ceokpongyeongweon method(赤鳳迎源法) using a collaterals understanding. 3) Cheongryongphami(靑龍擺尾) and Changkuthamhyeol method(蒼龜探穴法) were used on disease like insufficiency symptom-complex(盧證), Paekhoyodu(白虎搖頭) and Ceokpongyeongweon method(赤鳳迎源法) were used on excessivess symptom-complex(實證) of pathogenic factors selectively. But all of them often used on C.V.A. 4) The Yang Channel's points, under the elbow and knee point, are often used as points which are used in "Four method of conducting the Qi(氣), and the Yin, Ren(任) Du(督) channels are used less than the former. 5) The manual techniques of 'Four method of conducting the Qi(氣)' are often used in clinically. "Four method of conducting the Qi(氣)"has been studies as above, but there weren't a lot of literature which is about total manual technique of acupuncture. So there is a need study about it.