• 제목/요약/키워드: manganese oxide

검색결과 296건 처리시간 0.02초

망간산화물에 의한 1-Naphthol의 산화-결합 반응에 따른 반응산물 연구 (Investigation on Reaction Products From Oxidative Coupling Reactions of 1-Naphthol By Manganese Oxide)

  • 임동민;이두희;강기훈;신현상
    • 대한환경공학회지
    • /
    • 제29권9호
    • /
    • pp.989-996
    • /
    • 2007
  • 본 연구에서는 망간산화물 존재 하에서의 1-naphthol(1-NP)의 산화-결합반응을 통한 변환반응과 반응산물을 조사하였다. 변환 반응에 의해 생성된 반응산물을 대상으로 한 용매 추출과 HPLC, GC/MS, LC/MS 및 UV-Vis. 흡광특성 분석 등을 통해 반응산물의 분자 구조특성을 규명하였다. 반응 상등액에서 검출된 반응산물은 모두 1-NP에 비하여 높은 극성을 보였다. 주요 반응산물로는 1,4-naphthoquinon(1,4-NPQ)와 dimer, trimer 등의 소 중합체(oligomers)를 포함하며 특히, 용매추출$(CH_2Cl_2)$ 후 수용액에 잔류하는 친수성 형태의 반응산물은 다양한 분자량의(m/z=$400\sim2000$) 중합체로서 토양 휴믹물질(풀빅산)과 유사한 형태의 UV-Vis 흡광특성을 보였다. 또한, 비 반응성 생성물인 1,4-NPQ는 1-NP 존재 하에서 망간산화물에 의한 교차-결합(cross-coupling)을 통해 중합체로 변환될 수 있음을 확인하였다. 본 실험조건(20.5 mg/L, 1-NP, 2.5 g/L $MnO_2$, pH 5)에서 산화-결합 반응에 의한 중합체 형성으로 제거되는 1-NP의 양(mg/L)은 초기농도 대비 약 83%에 해당하며, 이들 중 약 30% 정도는 침전층에서 중류수와 메탄올$(CH_3OH)$에 의해 추출되지 않는 안정화된 형태의 불용성 중합체 생성물로 존재하였다. 이상의 결과는 망간산화물에 의한 산화-결합반응이 naphthol 오염토양의 처리에 있어서 소 중합체와 중합체 침전물로의 변환을 통한 오염 저감 및 제거 효과를 나타냄을 제시한다.

표면코팅을 통한 LiMn2O4 양극의 고온성능 개선 (Improvement of High-Temperature Performance of LiMn2O4 Cathode by Surface Coating)

  • 이길원;이종화;류지헌;오승모
    • 전기화학회지
    • /
    • 제12권1호
    • /
    • pp.81-87
    • /
    • 2009
  • 리튬 이차전지의 양극 활물질인 스피넬 망간산화물(${LiMn_2}{O_4}$, LMO) 표면에 ITO(indium tin oxide)를 코팅하여, 고온($55^{\circ}C$)에서 사이클 수명과 속도특성을 조사하였다. 정전류 정전압 충방전 실험의 결과, ITO가 코팅되지 않은 LMO 전극의 표면에서 고온 고전압 조건에서 전해질이 분해하여 피막이 형성되고, 이 피막의 저항으로 인하여 분극현상(polarization)이 심하게 발생하였다. 그러나, ITO가 2 mol% 이상 코팅된 LMO의 경우 양극 활물질과 전해질과의 직접적인 접촉 면적이 줄어들어, 전해질의 분해가 감소하였고 내부저항에 의한 분극 현상 또한 현저히 감소하였다. 이러한 결과, ITO가 코팅된 전극의 충방전에 따른 가역성이 코팅되지 않은 LMO에 비해 크게 향상되었다. 적외선 분광기를 이용하여 ITO가 코팅된 LMO 표면에서 피막형성이 감소함을 확인하였다. ITO의 코팅으로 LMO 전극의 속도특성도 크게 향상되었는데, 이는 저항이 큰 피막형성이 억제된다는 점과 ITO의 전기전도도가 크다는 사실로 설명할 수 있다.

ATO 처리후, 플라즈마 전해 산화 처리된 Ti-6Al-4V 합금의 표면 형태 (Surface Morphology of PEO-treated Ti-6Al-4V Alloy after Anodic Titanium Oxide Treatment)

  • Kim, Seung-Pyo;Choe, Han-Cheol
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2018년도 춘계학술대회 논문집
    • /
    • pp.75-75
    • /
    • 2018
  • Commercially pure titanium (CP-Ti) and Ti-6Al-4V alloys have been widely used in implant materials such as dental and orthopedic implants due to their corrosion resistance, biocompatibility, and good mechanical properties. However, surface modification of titanium and titanium alloys is necessary to improve osseointegration between implant surface and bone. Especially, when titanium oxide nanotubes are formed on the surface of titanium alloy, cell adhesion is greatly improved. In addition, plasma electrolytic oxide (PEO) coatings have a good safety for osseointegration and can easily and quickly form coatings of uniform thickness with various pore sizes. Recently, the effects of bone element such as magnesium, zinc, strontium, silicon, and manganese for bone regeneration are researching in dental implant field. The purpose of this study was researched on the surface morphology of PEO-treated Ti-6Al-4V alloy after anodic titanium oxide treatmentusing various instruments. Ti-6Al-4V ELI disks were used as specimens for nanotube formation and PEO-treatment. The solution for the nanotube formation experiment was 1 M $H_3PO_4$ + 0.8 wt. % NaF electrolyte was used. The applied potential was 30V for 1 hours. The PEO treatment was performed after removing the nanotubes by ultrasonics for 10 minutes. The PEO treatment after removal of the nanotubes was carried out in the $Ca(CH_3)_2{\cdot}H_2O+(CH_3COO)_2Mg{\cdot}4H_2O+Mn(CH_3COO)_2{\cdot}4H_2O+Zn(CH_3CO_2)_2Zn{\cdot}2H_2O+Sr(CH_2COO)_2{\cdot}0.5H_2O+C_3H_7CaO_6P$ and $Na_2SiO_3{\cdot}9H_2O$ electrolytes. And the PEO-treatment time and potential were 3 minutes at 280V. The morphology changes of the coatings on Ti-6Al-4V alloy surface were observed using FE-SEM, EDS, XRD, AFM, and scratch tester. The morphology of PEO-treated surface in 5 ion coating solution after nanotube removal showed formation or nano-sized mesh and micro-sized pores.

  • PDF

망간산화물을 이용한 TNT 환원부산물의 산화-결합반응에 의한 제거 연구 (Removal of TNT Reduction Products via Oxidative-Coupling Reaction Using Manganese Oxide)

  • 강기훈;임동민;신현상
    • 대한환경공학회지
    • /
    • 제27권5호
    • /
    • pp.476-485
    • /
    • 2005
  • 본 연구에서는 망간산화물을 이용하여 TNT 환원부산물들의 산화-결합반응(oxidative-coupling reaction)에 의한 변환반응을 조사하였다. 회분식 실험으로부터 일반 토양중에 존재하는 망간산화물의 하나인 버네사이트(birnessite)에 의해 실험에 사용한 TNT 환원부산물들이 완전히 변환되고 있음을 확인하였다. 또한 이러한 변환의 주요 원인은 산화-결합반응을 통한 중합체 형성에 기인한 것임을 M/S 분석을 통해 확인할 수 있었다. 각 TNT 환원부산물을 대상으로 버네사이트의 양에 따른 반응속도 실험을 통해 유사-일차 반응상수를 구하였고, 이로부터 버네사이트 비표면적에 대해 표준화한 반응상수, $k_{surf}$를 도출하였다. 아민기를 두 개 가지고 있는 diaminonitrotoluenes (DATs)의 $k_{surf}$값($1.49{\sim}1.91\;L/m^2{\cdot}day$)이 아민기를 하나 가지고 있는 dinitroaminotoluenes (DNTs)의 $k_{surf}$값($1.15{\times}10^{-2}{\sim}2.09{\times}10^{-2}\;L/m^2{\cdot}day$)에 비해 약 $10^2$배 정도 큼을 확인할 수 있었다. 또한 DNTs 혹은 DATs들간의 $k_{surf}$값을 비교함으로써 ortho 위치에 있는 아민기가 para 위치의 아민기에 비해 버네사이트에 의한 산화반응에 유리함을 확인할 수 있었다. TNT가 다양한 반응매개체(mediator)의 존재 하에서 상호결합 반응(cross-coupling)에 의해 제거되기는 어려우나, $Fe^0$ 및 망간산화물에 의한 연속처리로부터 TNT를 효과적으로 처리할 수 있음을 확인하였다.

Enhanced Electrochemical Properties of Surface Modified LiMn2O4 by Li-Fe Composites for Rechargeable Lithium Ion Batteries

  • Shi, Jin-Yi;Yi, Cheol-Woo;Liang, Lianhua;Kim, Keon
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권2호
    • /
    • pp.309-314
    • /
    • 2010
  • The surface modified $LiMn_2O_4$ materials with Li-Fe composites were prepared by a sol-gel method to improve the electrochemical performance of $LiMn_2O_4$ and were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), and transmission electron microscopy (TEM)-EDS. XRD results indicate that all the samples (modified and pristine samples) have cubic spinel structures, and XRD, XPS, and TEM-EDS data reveal the formation of $Li(Li_xFe_xMn_{2-2x})O_4$ solid solution on the surface of particles. For the electrochemical properties, the modified material demonstrated dramatically enhanced reversibility and stability even at elevated temperature. These improvements are attributed to the formation of the solid solution, and thus-formed solid solution phase on the surface of $LiMn_2O_4$ particle reduces the dissolution of Mn ion and suppresses the Jahn-Teller effect.

인젝터 방식 및 촉매 알갱이 크기에 따른 과산화수소 단일추진제 추력기의 응답 특성 (The Response Characteristics of the Hydrogen Peroxide Monopropellant Thruster as Injector and Catalyst Grain Size)

  • 안성용;박대종;정승미;권세진
    • 한국추진공학회지
    • /
    • 제13권1호
    • /
    • pp.19-26
    • /
    • 2009
  • 과산화수소 단일추진제 추력기의 응답성에 대한 실험적 연구를 수행하였다. 촉매베드의 특성을 배제하고 추력기 설계 인자에 따른 응답특성을 살펴보기 위해 $MnO_2$/$Al_2O_3$를 주 촉매로 고정하였다. 세 가지 50 N 급 추력기를 이용하여 인젝터 방식, ullage volume, 촉매 펠렛 크기, 반응기 부피에 따른 응답 속도를 측정하였다. 측정 결과 16-20 mesh 크기 촉매, shower head 인젝터를 사용한 경우 점화지연, 압력 상승 및 하강시간은 각각 14, 108, 94 ms로 상용 하이드라진 추력기 응답성에 근접한 특성을 보였다.

장항 제련소 지역 토양의 중금속 오염에 대한 환경광물학적 연구 (Heavy Metal Speciation in Soils from the janghang Smelter Area)

  • 여상진;김수진
    • 한국광물학회지
    • /
    • 제10권2호
    • /
    • pp.139-147
    • /
    • 1997
  • The Janghang smelter is the first lead, zinc and copper smelting facility in Korea which was operated for a half century from 1936 to 1989. The clay minerals and their heavy metal association in the soil profile around the smelter have been studied using XRD, EPMA, SEM-EDS, TEM, EPR and sequential extraction techniques. The soils in A horizon are highly acidic showing pH 4.45. The pH is going up with increasing depth. They have residual water contents of 1.18-1.51 wt%, loss on ignition of 6.32-7.79 wt%, and carbon contents of 0.08-0.88 wt%. Soils consist of quartz, feldspar, muscovite, kaolinite, vermiculite, biotite, chlorite, goethite and hematite in the decreasing abundance. The contents of clay minerals, especially vermiculite and chlorite, decrease with increasing depth. Sequential extraction experiments for the profile samples show that heavy metals (Zn, Cu, Pb, Cd) are highly concentrated in the A horizon of the soil profile as water-extractable (mostly amorphous), MgCl2-extractable (exchangeable in clay minerals), and organic phases. The heavy metal contents decrease with increasing depth. It suggests that the heavy metals are mainly associate with clay minerlas in an exchangeable state. It is also noted that heavy metals are highly concentrated in the manganese and iron oxide phases.

  • PDF

암모니아 침출공정(浸出工程) 기술개발(技術開發) 동향(動向) (Development of Ammoniacal Leaching Processes; A Review)

  • 유경근;김현중
    • 자원리싸이클링
    • /
    • 제21권5호
    • /
    • pp.3-17
    • /
    • 2012
  • 암모니아 습식제련공정은 철과 칼슘의 용해를 억제하며 구리 등의 금속을 선택적으로 침출이 가능한 장점이 있어 구리, 금, 니켈 및 코발트 등의 금속을 선택적으로 침출하기 위한 연구가 수행되어왔다. 이 글에서는 모터스크랩과 폐인쇄회로기판으로부터 구리의 선택적 침출, 티오황산염 사용 등 시안의 대체 및 저감을 위한 금의 암모니아침출, 산화니켈광 및 망간단괴처리공정 중간산물로부터 니켈과 코발트를 회수하기 위한 암모니아침출 기술개발동향을 정리하고 국내 연구개발방향을 제시하고자 하였다.

토양에서 생물학적 동전기법의 영향에 의한 As의 이동 (Improved Migration of Arsenic by Bio-Electrokinetics in Soil)

  • 김홍태;이태룡
    • 환경영향평가
    • /
    • 제24권4호
    • /
    • pp.344-351
    • /
    • 2015
  • 본 연구에서는 비소로 오염된 지역의 토양 및 지하수에 동전기적 기술을 사용하고 배양된 토양 미생물과 배양액을 주입하여 토양 내의 토착 미생물을 활성화하여 비소의 이동도를 상승시키는 것이 주요목표이다. 생물학적 동전기법은 미생물의 전기적 이동을 이용하여 기존의 생물학적 복원에서 문제시 되어온 늦은 분해속도와 낮은 제거효율의 단점을 극복할 수 있었다. 이는 전극의 전해액 대신 토양 미생물과 배양액을 혼합 주입하여 유기물질을 전자 공여체로 이용하는 다양한 토양 미생물이 Fe, Mn 등을 환원하게 된다. 이에 따라 주변의 금속 산화 미생물이 As(III)를 As(V)로 변환시킴으로써 As(III)의 이동도가 증가하게 되고, 이로 인해 As의 이동도가 기존 동전기법의 약 30%에 비해 60 ~ 70%정도로 상승함을 확인하였다.

Ultraviolet Photoelectron spectroscopy Study of Colossal Magnetoresistive $La_{0.7-x}P_rxCa_{0.3}MnO_3$

  • Lee, Chang-Won;Hoon Koh;Noh, Han-Jin;Park, Jong-Hyurk;Kim, Hyung-Do;Moonsup Han;Oh, Se-Jung;Eom, dai-Jin;Noh, Tae-Won
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1999년도 제17회 학술발표회 논문개요집
    • /
    • pp.172-172
    • /
    • 1999
  • Perovskite Manganese Oxide has been intensively investigated since the discovery of the colossal magnetoresistive(CMR) effect. In this paper, we studied the effect of temperature dependence and various doping dependence of rare earth site ions of La0.7-xPrxCa0.3MnO3 series using Ultraviolet Photoelectron spectroscopy(UPS). They show unusual temperature dependent features and the doped rare earth ions seem to affect the electron-phonon coupling strongly. We found clear evidence of metal-insulator transition from the spectral density at the Fermi level. but the transition temperature is lower than that deduced from transport measurements. Also we found that the spectral features change as time goes on implying that the surface of these materials is somewhat unstable in the vacuum. We can conclude from these results that the surface oxygen atoms correlated to the hopping electrons can escape from the material into the vacuum and that the surface state of these material is different from the bulk state.

  • PDF