• Nutrition Research and Practice
• /
• 제2권1호
• /
• pp.22-25
• /
• 2008

The purpose of this study was to estimate daily intake of manganese in Korean adults. Manganese intake was estimated through the use of the database of manganese content in frequently consumed Korean foods after first conducting anthropometric measurement and a survey on dietary intake with 354 Korean adults. Average age, height, weight and body mass index were 54.6 years, 165.7 cm, 67.2 kg and $24.5\;kg/m^2$ in males and 53.8 years, 153.7 cm, 59.1 kg and $24.9\;kg/m^2$ in females. The daily energy intakes of subjects were 1740.1 kcal in males and 1432.6 kcal in females. Male and female subjects recorded, respectively, 5.2 mg and 4.1 mg in manganese intake indicating that the male subjects consume more manganese (p<0.001). And they posted, respectively, 3.0 mg and 2.9 mg in manganese intake per 1000 kcal of energy consumption; it turned out that there was no significant difference. Daily manganese intake of both males and females posted, respectively, 148.8% and 135.2% of the adequate intake, and 8 males and 3 females surpassed the tolerable upper intake level. It is suggested that the study for accurate determination of manganese consumption needs to be more diversified based on the database of manganese content in Korean foods.

• 한국물환경학회지
• /
• 제26권3호
• /
• pp.454-459
• /
• 2010

This study investigated the applicability of manganese coated media such as manganese coated sand (MCS), manganese coated sericite (MCSe) and manganese coated starfish material calcined at $550^{\circ}C$ (MCSf) to remove Mn(II) in synthetic wastewater. Manganese coated media prepared at different pH was applied in the treatment of soluble Mn(II) in batch and column experiments at various Mn(II) concentrations. The amount of Mn coated on three different media was approximately 800~1100 mg/kg. From the stability test, negligible dissolution of Mn was observed above pH 3.0. In batch test, more than 40% of Mn(II) was removed by all sand media at various manganese concentrations. In order to see the effect of additional oxidant for the removal of Mn(II), 4 mg/L of hypochlorite was added in Mn(II) solution during column experiment. Breakthrough of Mn(II) was greatly retarded in the presence of hypochlorite in all column reactors packed with different media. Among the manganese coated media, MCSf prepared at pH 4 indicated the highest removal capacity. The removal efficiency of Mn(II) was also increased in the multi-layer system (0.5 g of MCS, MCSe, and MCSf each).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.900-903
• /
• 2003

Using $DV-X{\alpha}$ method, it is calculated that nickel reduces the energy band gap of manganese oxide in 3 additives of titanium, nickel and tin. Therefore, it is estimated that the electrical conductivity of manganese-nickel oxide has the lowest value in 3 kinds of manganese oxide. The manganese oxide and manganese-nickel oxide which were produced by anodic deposition under $30mA/cm^2$ at room temperature in manganese sulfate and manganese-nickel sulfate solution were thermal-analyzed by DTA and TGA. The weight change of manganese oxide continuously decreased below $508^{\circ}C$ and kept constant at $518{\sim}600^{\circ}C$. However, the manganeses-nickel oxide transformed at the temperature range of $510{\sim}537^{\circ}C$. It is observed that the nickel addition to manganese oxide increases transformation temperature and its range.

• Corrosion Science and Technology
• /
• 제9권2호
• /
• pp.98-103
• /
• 2010

In order to further reduce the cost without reducing the corrosion resistance, a high-manganese austenitic alloy for sink roll or stabilizer roll in continuous hot-dip coating lines was developed. A systematic study of corrosion behavior of the high-manganese austenitic alloy in pure zinc bath at $490^{\circ}C$ was carried out. The results shows that, the high-manganese austenitic alloy shows better corrosion resistance than 316L steel. The corrosion rate of the high-manganese austenitic alloy in pure zinc bath is calculated to be approximately $6.42{\times}10^{-4}g{\cdot}cm^{-2}{\cdot}h^{-1}$, while the 316L is $1.54{\times}10^{-3}g{\cdot}cm^{-2}{\cdot}h^{-1}$. The high-manganese austenitic alloy forms a three-phase intermetallic compound layer morphology containing ${\Gamma$}, ${\delta}$ and ${\zeta}$ phases, while the 316L is almost ${\zeta}$ phase. The ${\Gamma}$ and ${\delta}$ phases of the high-manganese austenitic alloy contain about 8.5 wt% Cr, the existence of Cr improve the stabilization of phases, which slow down the reaction of Fe and Zn, improve the corrosion resistance of the high-manganese austenitic alloy. So substitute the nickel with the manganese to manufacture the high-manganese austenitic alloy of low cost is feasible.

• 한국산업보건학회지
• /
• 제25권4호
• /
• pp.472-481
• /
• 2015

Objectives: Welding is a major task in shipbuilding yards that generates welding fumes. A significant amount of welding in shipbuilding yards is done on steel. Inevitably, manganese is present in the base metals being joined and the filler wire being used and, consequently, in the fumes to which workers are exposed. The objective of this work was to characterize manganese exposure associated with work area, total and particle size-selective mass concentration, and compare the mass concentrations obtained using a three-piece cassette sampler, size-selective impactor sampler and blood manganese concentrations. Materials: All samples were collected from the main work areas at one shipbuilding yard. We used a three piece cassette sampler and the eight stage cascade impactor sampler for the airborne manganese mass concentration of total and all size fractions, respectively. In addition, we used the results of health examination of workers sampled for airborne manganese. Results: The oder of high concentration of airborne manganese in shipbuilding processes was as follows; block assembly, block erection, outfitting installation, steel cutting, and outfitting preparation. The percentages of samples that exceeded the OES of the ministry of employment and labor by the cassette sampling method was 12.5%, however 59.1% of sampled workers by the impactor sampling method exceeded the TLV of the ACGIH. Conclusions: Even though the manganese concentrations in blood of workers exposed to higher airborne manganese concentration were higher than among those exposed to lower concentrations, there was no difference in blood manganese concentrations among work duration. The data analyzed here by characterizing size-selective mass concentrations indicates that the inhaled manganese of welders in shipbuilding yards could be mostly manganese-containing respirable particle sizes.

• 자원환경지질
• /
• 제17권4호
• /
• pp.273-282
• /
• 1984

분천 광산의 망간 광상은 선캠브리아기 율리통의 변성암류의 엽상 구조를 횡단하는 $N20^{\circ}E$ 방향의 단층면을 따라 열수 용액이 충진하여 형성된 열수 기원의 규산 망간 광석과 이의 표성 산화작용에 의하여 생성된 산화 망간 광석으로 구성되어 있다. 규산 망간 광석은 주로 파이록스만자이트로 구성되어 있으며 소량의 능망간석, 석영, 녹니석 및 황화황물(황철석, 황동석, 섬아연석, 방연석, 알라반다이트, 자류철석)등이 포함되어 있다. 산화 망간 광석은 엔소타이트, 버네사이트, 토도로카이트, 망가나이트 등으로 구성되어 있다. 파이록스만자이트와 능망간석의 산화과정 및 광물생성 순서는 다음과 같다. 능망간석$_{\rightarrow}^o$토도로카이트$_{\searro}^o$파이록스만자이트$_{\line(10){90}}^o{\nearro}$버네사이트$_{\rightarrow}^o$엔소타이트$_{\rightarrow}^s$ 망간나이트 (o : 산화, s : 단순한 순서) 광석을 구성하고 있는 광물들은 광학적, X선적, 적외선 흡수분광학적, 열분석에 의하여 감정 연구되었다.

• 상하수도학회지
• /
• 제24권3호
• /
• pp.341-349
• /
• 2010

It is well known that manganese is hard to oxidize under neutral pH condition in the atmosphere while iron can be easily oxidized to insoluble iron oxide. The purpose of this study is to identify removal mechanism of manganese in the D water treatment plant where is treating bank filtered water in aeration and rapid sand filtration. Average concentration of iron and manganese in bank filtered water were 5.9 mg/L and 3.6 mg/L in 2008, respectively. However, their concentration in rapid sand filtrate were only 0.11 mg/L and 0.03 mg/L, respectively. Most of the sand was coated with black colored manganese oxide except surface layer. According to EDX analysis of sand which was collected in different depth of sand filter, the content of i ron in the upper part sand was relatively higher than that in the lower part. while manganese content increased with a depth. The presence of iron and manganese oxidizing bacteria have been identified in sand of rapid sand filtration. It is supposed that these bacteria contributed some to remove iron and manganese in rapid sand filter. In conclusion, manganese has been simultaneously removed by physicochemical reaction and biological reaction. However, it is considered that the former reaction is dominant than the latter. That is, Mn(II) ion is rapidly adsorbed on ${\gamma}$-FeOOH which is intermediate iron oxidant and then adsorbed Mn(II) ion is oxidized to insoluble manganese oxide. In addition, manganese oxidation is accelerated by autocatalytic reaction of manganese oxide. The iron and manganese oxides deposited on the surface of the sand and then are aged with coating sand surface.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.473-478
• /
• 2008

망간황화물이 NO의 선택적 촉매 환원에 미치는 영향을 반응성 및 속도론적평가와 TPR(Temperature Programmed Reduction), TGA분석을 통하여 고찰하였다. 망간산화물은 $200^{\circ}C$ 이하의 저온에서 우수한 질소산화물 전환을 보였으나, 망간황화물의 경우 황화정도에 따라 질소산화물 전환은 고온으로 전이하였다. 또한 질소산화물 전환율도 황화정도에 따라 감소하였다. TPR 실험결과 망간산화물들은 $160^{\circ}C$ 이하의 낮은 온도에서 환원이 시작되었으나 망간황화물은 $280^{\circ}C$ 이상의 온도에서 환원이 시작되었다. TPR 실험을 통한 환원 시작온도는 촉매의SCR 시작 온도와 관련이 있는 것으로 판단된다. 망간황화물의 활성화에너지는 다른 촉매에 비해 낮게 나타났으나 pre-exponential 상수 크기가 다른 촉매에 비해 1/1000배 만큼 작아 NO에 대한 활성이 낮게 나타났다. 천연망간광석은 함유된 다양한 금속산화물의 영향으로 순수한 망간산화물보다 낮은 온도에서 재생되었다.

• 한국물환경학회지
• /
• 제20권5호
• /
• pp.409-414
• /
• 2004

Pilot-scale experiments were performed for the treatment of bank filtrate contammg high manganese concentration around 2mg/L using rapid manganese sand filtration to investigate effects of oxidant dose and pH control on the removal efficiency of manganese. For theoretical dose ranges of oxidant (sodium hypochlorite) between 3 and 4mg/L, the manganese concentration of effluent was 0.57 mg/L, which corresponded to 72.5% removal and was higher than drinking water quality standards of 0.3mg/L. For excess dose ranges of oxidant between 4 and 8mg/L, the manganese concentration of effluent was reduced to 0.14mg/L, which corresponded to 94.5% removal, but the residual chlorine concentration was over 1.0mg/L. On the other hand, manganese removal efficiency drastically increased up to the value of 98.0%, which is equivalent to the effluent concentration of 0.03mg/L by controling pH to the range between 7 and 8 for the theoretical dose of oxidant. Consequently, these results indicated that appropriate dose of chemicals, such as oxidant and alkali, and continuous monitoring of manganese should be necessary to obtain efficient removal of manganese and to optimize the maintenance of treatment facilities for the treatment of bank filtrate with high concentration of manganese.

• 동아시아식생활학회지
• /
• 제7권2호
• /
• pp.143-151
• /
• 1997

The purpose of this study was to investigate the effect of iron and selenium intakes on utilization of manganese in rats fed adequate, 2-fold, 4-fold iron and adequate, high selenium for 6 weeks. There was no difference feed intake across iron and selenium containing diet groups. Body weight gain in 2-fold iron and high selenium group(MFeHSe) was significantly higher than those in other groups. Serum iron level was increased with iron increment, and liver iron content was decreased with selenium supplementation. Selenium and manganese contents in tissues were decreased with iron increment. In the case of manganese balance, manganese excretion through feces was significantly increased as iron intake was increased. However, retention and apparent absorption of manganese were not significantly affected by dietary iron. From these results, it could be suggested that the supplementations of iron and selenium affected the manganese utilization. Therefore, it must be considered interaction with various minerals in micro-nutrient supplementations.