• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.605-612
• /
• 2013

Removal of decay heat from an operating reactor during a prolonged station blackout condition is a big concern for reactor designers, especially after the recent Fukushima accident. In the case of a prolonged station blackout condition, heat removal is possible only by passive means since no pumps or active systems are available. Keeping this in mind, the AHWR has been designed with many passive safety features. One of them is a passive means of removing decay heat with the help of Isolation Condensers (ICs) which are submerged in a big water pool called the Gravity Driven Water Pool (GDWP). The ICs have many tubes in which the steam, generated by the reactor core due to the decay heat, flows and condenses by rejecting the heat into the water pool. After condensation, the condensate falls back into the steam drum of the reactor. The GDWP tank holds a large amount of water, about 8000 $m^3$, which is located at a higher elevation than the steam drum of the reactor in order to promote natural circulation. Due to the recent Fukushima type accidents, it has been a concern to understand and evaluate the capability of the ICs to remove decay heat for a prolonged period without escalating fuel sheath temperature. In view of this, an analysis has been performed for decay heat removal characteristics over several days of an AHWR by ICs. The computer code RELAP5/MOD3.2 was used for this purpose. Results indicate that the ICs can remove the decay heat for more than 10 days without causing any bulk boiling in the GDWP. After that, decay heat can be removed for more than 40 days by boiling off the pool inventory. The pressure inside the containment does not exceed the design pressure even after 10 days by condensation of steam generated from the GDWP on the walls of containment and on the Passive Containment Cooling System (PCCS) tubes. If venting is carried out after this period, the decay heat can be removed for more than 50 days without exceeding the design limits.

• Journal of Korea Spatial Information System Society
• /
• v.7 no.3 s.15
• /
• pp.33-44
• /
• 2005

Recently, the weather has been influenced by the environmental pollution and the oil price has been risen because of the lack of resources. So, the weather and energy are influencing on not only enterprises or nations, but also individual daily life and economic activities very much. Because of these reasons, there are so many researches about management of solar radiation needed to develope solar energy as alternative energy. And many researchers are also interested in identifying the area according to changing characteristics of climate data. However, the researches have not developed how to apply the cluster analysis, retrieval and analytical results according to the characteristics of the area through data mining. In this paper, we design a data model of the data for storing and managing the climate data tested in twenty cities in the domestic area. And we provide the information according to the characteristics of the area after clustering the domestic climate data, using k-means clustering algorithm. And we suggest the way how to apply the department store and amusement park as an applied weather marketing. The proposed system is useful for constructing the database about the weather marketing and for providing the elements and analysis information.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.973-977
• /
• 2003

Land is the only immovable property that can be used, as a means for agricultural production as well as a means for mortgage for financing industrial or commercial enterprises. Spatial technologies play a key role in managing our land, water and natural resources. Cadastral data is a major component for the development of Land Information System. Therefore, systematic land registration system based on accurate and scientific cadastral map are found inevitable for poverty alleviation, good governance and women empowerment through security of their rights on property, as well as the planning and development of a sustainable environmental protection within Metropolitan city. Digital cadastral parcel is the fundamental spatial unit on which database is designed, created, maintained and operated. Availability of accurate and updated cadastral maps is a primary requisite for successful planning, policy formulating and maintenance of city utility services, which need cadastral and utility information together. Flawed cadastral maps can put land, revenue and taxation system at stake. Kathmandu the capital city of Nepal still is lacking utility maps combining cadastral information with the utility. There is an urgent need to have an effective, accurate and easy to access land revenue and utility services system within the urban areas which could be achieved after the production of reliable base maps and land registration system to guarantee land allocation and property rights which can well be achieved by digital conversion and correction of base cadastral maps. This paper highlights the drawbacks of the conventional cadastral maps and the possible advantages of digital cadastral maps over these. Also the problems, issues and implications during digital conversion and creating database of the same will be discussed.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.6
• /
• pp.145-152
• /
• 2014

This Study was done to estimate the availability of biological resistance analysis method in medical equipment companies in Korea, and if it is usefull in predicting risk of obesity and cardiovascular disease and managing of it, by means of comparing it with blood tests. Especially, we analyzed the correlation between circumference length and fat thickness of each site of body area, which are ones of among measurement values of the BIA. This study has the purpose to propose the use of BIA as basement of diagnosis for efficient management and assessment in the medical device industry in our country.

• Knowledge Management Research
• /
• v.11 no.1
• /
• pp.129-146
• /
• 2010

As knowledge has become the most important means of production for a company to survive in a "knowledge-based society", knowledge management has become the key issue in the corporate sector. Despite its growing significance, there are limited numbers of research that describe how companies actually develop, share and practice their knowledge. From this perspective, this study used a qualitative approach to explore on the actual process of knowledge management implementation. In-depth interviews with eleven senior managers, who were working at S global corporation, were conducted. The results show that there are differences between how the participants perceive and how they actually perform in managing knowledge. While the participants tend to conceptualize knowledge management as building a technical system, their performance has shown that knowledge has been developed and shared through active interaction among the members in the company. The factors that impede knowledge management were caused by the individualized job assignment and inapplicable exercises that result in obscuring information flow and utilizing inadequate and low quality of knowledge. The findings of this study imply that knowledge management is not a matter of formality but a paradigm that assures for the flow and share of knowledge.

• Tunnel and Underground Space
• /
• v.12 no.3
• /
• pp.152-157
• /
• 2002

Optimal design of the long tunnels with large cross sections essential for the effective development of the limited land in Korea becomes more and more difficult owing to the constantly changing social, economic, environmental and technological factors. Deficiency of the domestic research works till now on the elementary topics on tunnel ventilation retards progress on developing the key technologies urgently required for designing and managing the long and large tunnels. This paper aims at identifying the subjects on which research must be carried out for the construction and management of vehicle tunnels in Korea by means of scrutinizing the contents of the publications since 1991 at the International Symposium on Aerodynamic and Ventilation of Vehicle Tunnels, the only international conference on the tunnel ventilation.

• Archives of Plastic Surgery
• /
• v.44 no.5
• /
• pp.457-468
• /
• 2017

Background Abdominoplasty, with or without liposuction, is among the most frequently performed aesthetic procedures. Its main objective is to improve the body contour by means of excising redundant skin and fat tissue. Although abdominoplasty is considered a safe procedure with high satisfaction rates, intraoperative and postoperative complications can become a challenge for the surgical team. The aim of this article is to offer a synopsis of the most common complications arising after abdominoplasty, along with evidence-based guidelines about how to prevent and treat them. Methods A systematic MEDLINE search strategy was designed using appropriate Medical Subject Headings (MeSH) terms, and references were scanned for further relevant articles. Results According to the published case series, local complications are considerably more common than complications with systemic repercussions. Approximately 10% to 20% of patients suffer a local complication following abdominoplasty, while fewer than 1% suffer a systemic complication. Prevention and management strategies are critically discussed for complications including seroma, haematoma, infection, skin necrosis, suture extrusions, hypertrophic scars, neurological symptoms, umbilical anomalies, deep venous thrombosis and pulmonary thromboembolism, respiratory distress, and death. Conclusions The complications of abdominoplasty vary in severity and in the impact they have on the aesthetic outcomes. Recommendations for prevention and management are based on various levels of evidence, with a risk of observer bias. However, most complications can be treated appropriately following the current standards, with satisfactory results.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.605-614
• /
• 2007

Feeding pigs used to be a means of managing domestic resources that may otherwise have been wasted into valuable animal protein. Feeding pigs thus was a form of husbandry. Following recent rapid industrial development, pig rearing has changed from extensive to intensive, but this transformation has been associated with major concerns. The concentration of large amounts of pig manure in small arrears is environmentally hazardous. Moreover, high densities of animals in intensive production systems also impose a health threat for both animals and humans. Furthermore, the use of growth promoters and preventive medicines for higher production efficiencies, such as in-feed antibiotics, also induces microbial resistance thus affects human therapeutics. In addition, consumers are questioning the ethics of treating animals in intensive production systems. Animal welfare, environmental and bio-safe issues are re-shaping the nature of pig production systems. Feeding pigs thus involves not only the consideration of economic traits, but also welfare traits and environmental traits. Thus, a focus on technological feasibility, environmental sustainability and social desirability is essential for successful feeding operations. Feeding pigs now involves multiple projects with different sustainability goals, but goal conflicts exist since no pattern or scenario can fulfill all sustainability goals and the disagreements are complicated by reduced or even no use of in-feed antibiotics. Thus it is difficult to feed pigs in a manner that meets all goals of high quality, safe product, eco- and bio-sustainability, animal welfare and profit. A sustainable pig production system thus requires a prioritization of goals based on understanding among consumers, society and producers and needs to view from both a local and global perspective.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.226-228
• /
• 1996

Rectal tenesmus is a persistent, painful and ineffectual sensation of straining at stool or opening of the bowels. The pain is usually spasmodic in nature and most commonly encountered in patients with carcinoma of the rectum or other pelvic organs. In 1988, Bristowand Foster reported that patients with severe spasmodic painful tenesmus were relieved with chemical sympathectomy. In 1990, Plancarte introduced block of Ganglion impar. This technique is proposed as an alternative means of managing localized perineal pain of sympathetic origin. Ganglion impar block was performed on a 54-year-old female patient when analgesic or psychotropic drugs failed to control the symptoms of post-traumatic severe spasmodic painful tenesmus. Postoperatively, patient was free of tenesmoid pain for only 7 days. We then performed neurotomy by RF lesion generator which provided complete pain relief.

• Journal of Korea Game Society
• /
• v.16 no.3
• /
• pp.35-44
• /
• 2016

The progress of the game engine make us easier to develop a game product and it is possible for one man to make a game. This means that if you have ideas about game, you can make a game as you thought only if you know how to design a game. Because the game designing is not the field that may not be used like tools and could not buy like graphical data. This study, based on the practice, presented to the understanding and guidance for people who want to know about game designing such as no experienced person and starting new game design. These contributions are supported by a detailed exploration of common understandings of game design methods so that I expect to help designing or managing the project.