• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.225-227
• /
• 2006

Active power factor correction methods for electronic ballast are reviewed in this paper. PFC technology becomes more important due to various wattage ratings of new light sources. Expecially, most popular two method critical conduction mode and average mode, are described. Each characteristics are compared in relation to application target and power rating.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1093-1096
• /
• 2002

In this paper, a novel multi voltage inverter system is proposed for reductions of harmonics, which can compensate reactive power. At first, we remove capacitor at input side for reactive power compensation. Secondly, by adding DC voltage to the filter capacitor, it can control power factors as lead-phase according to alterations of loads at power reception. Thirdly, if winding and single phase-bridge inverter(auxiliary circuit) is installed to DC power for reduction of harmonic, waveform of output voltages become to 36-steps. Thus, SVC(static var compensator) systems which can reduce harmonics are designed.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.195-197
• /
• 2006

This paper presents new power development planning method. This method uses modified-OPF (Optimal Power Flow) includes attribution constrains. After solved the OPF, shadow prices of constraints are used making the weighting factors. These factors are used ordering new generators.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.310-313
• /
• 2005

In this paper, four quadrant CBPS(Compact Bipolar Power Supply) which development and study using universal PWM controller. The CBPS has 24V DC-link voltage, +/-5A output current, 50kHz switching frequency and 30Hz full load bandwidth using FET device. Proposed system has two independent PWM controllers for each full-bridge switch leg drive and PI control loops for current regulations. It is shown experimental results that good step response of the current output.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.301-302
• /
• 2005

A low-power gate driver IC, which can be used for TFT-LCD application, is proposed. The short-circuit current of the output buffer is greatly reduced. An experimental prototype gate driver implemented in a $0.35-{\mu}m$ CMOS technology demonstrates that the power reduction of 16 % is obtained.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.52-54
• /
• 2005

This paper describes an exciting current calculation method for transformers by finite element method. In case of a special case such as air-gap presence, one can not calculate exciting current accurately using exciting power curves due to flinging effect, magnetic saturation and so on. Transient analysis with external circuit is performed with a 2D model and compared to a test result.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.416-417
• /
• 2007

With the benifit of telecommunication and IT technologies, Real-time Power system analysis having been gradually progressed. The power system become more complex due to the gradual increment of power demand. We analyze the problems in power system operation, by the use of PSS/E(power flow, fault and transient stability study) and VSAT for voltage stability. The results of establishment of power system operating plan and countermeasure are described.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.99-104
• /
• 2015

In this study, it has been initiated to investigate the specific abnormal vibration signal that has been captured in the power equipment. Array Microphone can be used in order to detect the direction and the position of the noise source. It is possible to track the abnormal mechanical noise in the power plant by utilizing the program and the microphone array system developed from this research. Array microphone system can be operated as a constant monitoring system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1327-1333
• /
• 2008

Since Cost Based Pool markets has been continued to power markets, Genco. needs economic analysis about investment in power plants. Particularly most Private Genco.s have presently a construction plan about LNG combined cycle thermal power plants. In this paper, we propose a economic analysis method of LNG combined cycle thermal power plants using Economic Dispatch and Optimal Power Flow in CBP markets. Also we develope computation model using it for decision making to build a plant. This method can consider a variation of power facility like power plants and transmission lines in CBP markets. Finally, this dissertation provides a relevant case study to confirm the effect of cost factor to economical efficiency.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.936-941
• /
• 2011

Generation cooperations have focused on active power directly related to economic value. So, utility cooperation have taken expense to stabilize power system, although generator has responded quickly with variation of power system voltage and is controlled at real time. As a reactive power source, it is necessary for generator's capabilities to be verified. But domestic generators scarcely have been tested and operated to reactive power capability. In case of power system fault, operators would not quickly take a follow-up actions about reactive power disturbance. Therefore generator reactive power capability verification strategy must be developed, several generators is tested as examples since 2004. This paper is extracted from the test results.