• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.391-394
• /
• 1998

The man-machine interface Is an important factor in the computer system, and it is thought that line-of-sight (LOS) detection technology will allow significant advances in this field. Techniques for detecting LOS for use in human interfaces have been studied［1]［2］. In earlier studies, however, LOS was detected with a head piece, goggles, or through fixing the position of the head. The limitations imposed by these fixed conditions render them unsuitable far use in interfaces, as they have adverse mental or physical effects on humans. Therefore. they have not been sufficiently developed for practical application. Research on non-contact LOS detection is expected to result in a usable LOS man-machine interface［3］［4］, and the current study is intended to be a step in that direction. The authors used color contact lenses for LOS detection, and applied this new method to a computer interface. The use of color contact lenses simplifies image processing. The algorithm used in this study is sufficiently accurate for practical applications. This technique can be used in input devices, in virtual reality applications, and in human engineering research.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.53-59
• /
• 2011

In this paper, the implementation of a production control system has been studied in order to obtain Realtime Cost Calculation using an exact Machine Factor and Man Factor based on RFID reader data transferred through network. For the study, microprocessor built in the controller of production facilities is used and also RFID reader is built additionally. Control part, card reader used for check the beginning and ending working time of workers, and Machine Factor and Man Factor calculated are transferred to server via PLC transmission port, serial transmission port, or Ethernet transmission port. By using the system, the production cost or the production efficiency is calculated exactly. Therefore it is possible to improve production rate and cost reduction by the use of the proposed production control system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.3
• /
• pp.373-380
• /
• 2008

So far there have been many researches on machine-based recognition of handwritten digit. But we have not yet attained the level of performance that can be satisfactory to men. The dissatisfaction with the performance of machine comes from not only the low accuracy of recognition but also the dissimilarity of the recognition results between man and machine. To reduce the difference of machine from man we first made an experiment with the human recognition of handwritten digits and then inquiry into the way of the human recognition that makes the results of men different from that of machine. We found out the attributes that play an important role in the human recognition process through the analysis of the experimental results like uni- and bi-directional confused pairs of digits, several ones unmixed up with another and the redundancy of mis-recognition, and proposed the approach direction to be able to improve the accuracy of the machine-based recognition, and furthermore the similarity in the recognition results of men and machine on the basis of the found facts above.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.9 no.13
• /
• pp.1-11
• /
• 1986

The mechanization of production facilities being made rapid progress, and its function being diversified and complicated for industrialized period, the relation between machine and Its operator brings about many problems which are concerned with accident. In these circumstance, the purpose of industrial safety can not be properly achieved as considered by only one side of machine or man. Therefore, it is necessary to study how to cope with the safety of man-machine system. It has to be considered in the above mentioned contents that safety management can not be attained through only technique of numerical control. The cause of accident being studied scientifically, the service of safety problems has to be systematized and operated in rational safety organization. The purpose of this thesis is to consider preventing and decreasing industrial accident from production system field by means of the improvement of worker's own safety consciousness and introducing the function of safety management to the duties of labour union.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1191-1194
• /
• 1995

A conversational programming system for turning processes was studied to enhance the user friendlness of an NC by adopting man-machine interface functions through Visual C $^{++}$ programming tool under the Windows 95 environment. Shop floor programming performance was incorporated in the developed CAM module. In order to increase flexibility of the man-machine interface, graphic based programmin tool have been developed. An NC turning machine equipped whit an open architecture PCNC was used as a test bed of the system. Perfomance of the system was verified through case studies..

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.764-769
• /
• 1988

In this paper the failure possibility and the error possibility are used to represent reliability of a technical component and that of a human operator, respectively. The failure possibility and the error possibility are fuzzy sets on the interval [0,1]. In a man-machine system, reliability of the technical component and that of the human operator are usually affected by many factors, e.g., the environment in which a machine is operated, psychological stress of the human operator, etc. The possibility is derived from not only the failure or the error rate but also estimates of these factors. The fuzzy reasoning plays an important role in the derivation. The reliability analysis is performed by the use of the possibility obtained by the present method. Moreover this paper discusses the sensitivity analysis which evaluates what extent the change of the estimation of each factor has an influence on reliability of a man-machine system. The important factors to be ameliorated are shown through the sensitivity analysis.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.29-39
• /
• 1998

A conversational programming system for turning processes was studied to enhance the user friendliness of a NC Lathe by adopting man-machine interface functions through Delphi programming tool under the Windows 95 environment. Functions of tool collision checking were developed through zone limitation algorithms. Final shape of workpiece was generated by means of tree structure algorithm. Shop floor programming performance was incorporated in the developed CAM module. In order to increase flexibility of the man-machine interface, graphic based programming tools have been developed. A NC turning machine equipped with an open architecture PCNC was used as a test bed of the system. Performance of the system was verified through case studies.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.10 no.16
• /
• pp.133-141
• /
• 1987

Man-machine assignment problem with random service and processing times is considered in this paper. Assuming heterogeneous semi-automatic machines, the problem is dealt with as follow; 1. For the different type of machines that have probabilistics distribution of processing time and nan service time, man·machine assignment problem is solved by heuristic method using expected time value if machine. 2. Since each related time is a random variable, the performance of the optimal assignment obtained from the above method is verified through monte carlo simulation method. 3. The above procedures are programed by BASIC language to use easily and rapidly in the personal computer. The result of this study can contribute to productivity enhancement by increasing the efficiencies of both operators and machines.

• Journal of the military operations research society of Korea
• /
• v.23 no.1
• /
• pp.76-87
• /
• 1997

This paper deals with reliability and MTTF analysis of a non-repairable man-machine system operating under different weather conditions. The system consists of a hardware(machine) and a two-operator standby subsystem such as the air combat maneuvering of fighters with dual seat. The failure times for the subsystems follow the exponential distribution with constant parameter. By considering not only the effect on hardware component but also the weather conditions and human performance factors such as the operator's errors, a Markov model is presented as a method for evaluating the system reliability of time continuous operation tasks. Laplace transforms of the various state probabilities have been derived and then reliability of the system, at any time t, has been computed by inversion process. MTTF has also been computed.

• Journal of Biosystems Engineering
• /
• v.32 no.5
• /
• pp.284-291
• /
• 2007

This study was to investigate performance of position, basic controls and additional control for man-machine interface on a 3-point hitch of a tractor. The developed additional control was one-touchup, backup, turnup, liftarm limited, PTO on/off and an external control. As a result of experiment, maximum steady state error of response system was lower than $0.8^{\circ}$ and this result showed the function operated normally because the dead band of system set was ${\pm}1^{\circ}$. There was no abnormal situation by switch operation and sensor signal during the performance test. The results of experiment showed the characteristics of the response was sufficient to be used as the position and additional control system for tractors.