• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.1
• /
• pp.29-37
• /
• 2020

Work to improve network throughput has been focused on network coding as the utilization of IoT-based application services increases and network usage increases rapidly. In network coding, nodes transform packets received from neighboring nodes into a combination of encoded packets for transmission and decoding at the destination. This scheme is based on trust among nodes, but in the IoT environment where nodes are free to join, a malicious node can fabricate the packet if it legally participates in the configuration. It is difficult to identify the authenticity of the encoded packet since the packet received at destination is not a single source but a combination of packets generated by several nodes. In this paper, we propose a method to detect "look-like-valid" packets that have been attacked and disguised in packets received at destination, and to identify valid messages in the reconstructions. This method shows that network coding performance is significantly improved because the destination can reconstruct a valid message with only received packets without retransmission with a high probability, despite the presence of disguised packets.

• Convergence Security Journal
• /
• v.19 no.3
• /
• pp.13-19
• /
• 2019

MANET has many security vulnerabilities because it consists of only mobile nodes using wireless. In particular, it is a very important factor determining network performance that excludes the participation of malicious nodes through accurate reliability measurements and authentication of nodes participating in the network. In this paper, we proposed a technique applied with blockchain technology in order to prevent forgery of authentication information for nodes participating in the network. And, an area-based hierarchical structure was applied to increase the efficiency of authentication for nodes and apply the optimal technique of block generation and exchange protocol. In addition, four data payloads were added to the block header in order to add authentication information for nodes in block. To improve the reliability by applying the blockchain technique to the hop-by-hop data transfer method between mobile nodes, blockchain exchange protocol through transaction creation, block packaging and verification processes were implemented. We performed the comparative experiment with the existing methods to evaluate the performance of the proposed method and confirmed the excellent performance by the experiment results.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.9
• /
• pp.235-242
• /
• 2018

Various technologies have been developed to more efficiently share content such as P2P, CDN, and CCN. These technologies take a common approach that content request packets is responded by distributed network nodes or hosts, not by a single content distributor. Such approaches not only resolve network congestion around content distributors, but also make it possible to distribute content regardless of the system and network status of content distributors. However, when receiving content from distributed nodes/hosts, not from authenticated distributors, users cannot practically identify which node/host sent content to them. Due to this characteristic, various hacking caused by the malicious modification of content is possible. Therefore, to make such approaches more secure, a content authentication technique is required. In this paper, we propose a improved operation of MHT used in CCN for authenticating distributed content. Then we evaluate the proposed method by comparing its performance with the existing technology.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.2
• /
• pp.177-186
• /
• 2017

With the latest developments in ICT(Information Communication Technology) technology, research on Intelligent Car, Connected Car that support autonomous driving or services is actively underway. It is true that the number of inputs linked to external connections is likely to be exposed to a malicious intrusion. I studied possible security issues that may occur within the Connected Car. A variety of security issues may arise in the use of CAN, the most typical internal network of vehicles. The data can be encrypted by encrypting the entire data within the CAN network system to resolve the security issues, but can be time-consuming and time-consuming, and can cause the authentication process to be carried out in the event of a certification procedure. To resolve this problem, CAN network system can be used to authenticate nodes in the network to perform a unique authentication of nodes using nodes in the network to authenticate nodes in the nodes and By encoding the ID, identifying the identity of the data, changing the identity of the ID and decryption algorithm, and identifying the cipher and certification techniques of the external invader, the encryption and authentication techniques could be detected by detecting and verifying the external intruder. Add a monitoring node to the CAN network to resolve this. Share a unique ID that can be authenticated using the server that performs the initial certification of nodes within the network and encrypt IDs to secure data. By detecting external invaders, designing encryption and authentication techniques was designed to detect external intrusion and certification techniques, enabling them to detect external intrusions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.25-32
• /
• 2019

The core of the block chain technology is solving the problem of agreement on double payment, and the PoW, PoS and DPoS algorithms used for this have been studied. PoW in-process proofs are consensus systems that require feasible efforts to prevent minor or malicious use of computing capabilities, such as sending spam e-mail or initiating denial of service (DoS) attacks. The proof of the PoS is made to solve the Nothing at stake problem as well as the energy waste of the proof of work (PoW) algorithm, and the decision of the sum of each node is decided according to the amount of money, not the calculation ability. DPoS is that a small number of authorized users maintain a trade consensus through a distributed network, whereas DPS provides consent authority to a small number of representatives, whereas PoS has consent authority to all users. If PoS is direct democracy, DPoS is indirect democracy. This study aims to contribute to the continuous development of the related field through the study of the algorithm of the block chain agreement.

• Journal of Internet of Things and Convergence
• /
• v.8 no.5
• /
• pp.55-61
• /
• 2022

Today's payment systems are becoming unmanned and changing to a way of paying with kiosks. This has the advantage of convenient payment because consumers can select a menu and specify the number of products to be purchased with just a touch of the screen. However, from the point of view of system security, the actual kiosk system has various vulnerabilities. This can hijack the administrator account, gain system privileges, and perform malicious actions. In addition, it is exposed to a number of security threats, such as the possibility of wasting unnecessary resources by abnormally increasing the number of payments, and causing the device to fail to operate normally. Therefore, in this paper, if any node of a participant in the solana blockchain approves an incorrect fork, the stake of the voting nodes is deleted. Also, since all participants can see the transaction history due to the nature of the block chain, I intend to write a thesis on a system that improves the vulnerability of kiosk payments by separating the access rights through the private blockchain.

• International Journal of Computer Science & Network Security
• /
• v.22 no.3
• /
• pp.364-374
• /
• 2022

Health information systems (HIS) are facing security challenges on data privacy and confidentiality. These challenges are based on centralized system architecture creating a target for malicious attacks. Blockchain technology has emerged as a trending technology with the potential to improve data security. Despite the effectiveness of this technology, still HIS are suffering from a lack of data privacy and confidentiality. This paper presents a blockchain-based data storage security architecture integrated with an e-Health care system to improve its security. The study employed a qualitative research method where data were collected using interviews and document analysis. Execute-order-validate Fabric's storage security architecture was implemented through private data collection, which is the combination of the actual private data stored in a private state, and a hash of that private data to guarantee data privacy. The key findings of this research show that data privacy and confidentiality are attained through a private data policy. Network peers are decentralized with blockchain only for hash storage to avoid storage challenges. Cost-effectiveness is achieved through data storage within a database of a Hyperledger Fabric. The overall performance of Fabric is higher than Ethereum. Ethereum's low performance is due to its execute-validate architecture which has high computation power with transaction inconsistencies. E-Health care system administrators should be trained and engaged with blockchain architectural designs for health data storage security. Health policymakers should be aware of blockchain technology and make use of the findings. The scientific contribution of this study is based on; cost-effectiveness of secured data storage, the use of hashes of network data stored in each node, and low energy consumption of Fabric leading to high performance.

• Journal of the Korea Society for Simulation
• /
• v.20 no.3
• /
• pp.69-78
• /
• 2011

A large-scale sensor network usually operates in open and unattended environments, hence individual sensor node is vulnerable to various attacks. Therefore, malicious attackers can physically capture sensor nodes and inject false reports into the network easily through compromised nodes. These false reports are forwarded to the base station. The false report injection attack causes not only false alarms, but also the depletion of the restricted energy resources in a battery powered network. The statistical en-route filtering (SEF) mechanism was proposed to detect and drop false reports en route. In SEF, the choice of routing paths largely affect the energy consumption rate and the detecting power of the false report. To sustain the secure routing path, when and how to execute the path re-selection is greatly need by reason of the frequent network topology change and the nodes's limitations. In this paper, the regional path re-selection period determination method is proposed for efficient usage of the limited energy resource. A fuzzy logic system is exploited in order to dynamically determine the path re-selection period and compose the routing path. The simulation results show that up to 50% of the energy is saved by applying the proposed method.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.151-164
• /
• 2009

The importance of sensor networks as a base of ubiquitous computing realization is being highlighted, and espicially the security is recognized as an important research isuue, because of their characteristics.Several efforts are underway to provide security services in sensor networks, but most of them are preventive approaches based on cryptography. However, sensor nodes are extremely vulnerable to capture or key compromise. To ensure the security of the network, it is critical to develop security Intrusion Detection System (IDS) that can survive malicious attacks from "insiders" who have access to keying materials or the full control of some nodes, taking their charateristics into consideration. In this perper, we design a distributed and adaptive IDS architecture on sensor networks, respecting both of energy efficiency and IDS efficiency. Utilizing a modified HEED algorithm, a clustering algorithm, distributed IDS nodes (dIDS) are selected according to node's residual energy and degree. Then the monitoring results of dIDSswith detection codes are transferred to dIDSs in next round, in order to perform consecutive and integrated IDS process and urgent report are sent through high priority messages. With the simulation we show that the superiorities of our architecture in the the efficiency, overhead, and detection capability view, in comparison with a recent existent research, adaptive IDS.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.6
• /
• pp.59-69
• /
• 2005

Ad hoc network is the network which can be considered without a pre-constructed infrastructure, and a mobile node can join the network freely. However, the participation of the mobile nodes to the ad hoc network brings up much burden of re-computation for new routes, because it leads to losing the connection frequently. And, also, it causes serious security problem to be broadcasted wrong information by the malicious user. Therefore, it needs authentication against the mobile nodes. To make that Possible, we have two methods: single CA and distributed CA. In the case of CA method, the wireless network can be collapsed owing to expose the CA, but still the distributed CA method is a little more safe than previous one because it needs attacks toward a lot of CAs to collapse the network We can consider Secret Share scheme as the method that constructs the distributed CA system, but it is weak when the network size is too large. In this paper, we suggest hierarchical structure for the authentication method to solve this problem, and we will show the results of simulation for this suggestion.