• Journal of radiological science and technology
• /
• v.37 no.2
• /
• pp.109-116
• /
• 2014

Many studies have suggested that in the era of Drug-Eluting Stents(DES) are one of the causes of In-Stent Restenosis(ISR) of Stent Fracture(SF). The present study sought to evaluate clinical characteristics of patients with stent fracture after successful DES implantation. The 4,701 patients were selected for analysis who underwent a follow-up coronary angiography irrespective of ischemic symptoms. The overall incidence of SF was 32 patients(male:female=19:13, Av. age $62.44{\pm}9.8$year, 0.68%). Fractures of Sirolimus-Eluting Stents(SES), Paclitaxel-Eluting Stents(PES), Biolimus A9-Eluting Stents(BES), Everolimus-Eluting Etents(EES), Endothelial Progenitor Cell Capture Stent(EPC) and Zotarolimus-Eluting Stents(ZES) are accounted for 19(59.4%), 9(28.1%), 2(6.3%), 1(3.1%), 1(3.1%) and 0(0%) respectively. SF developed in the left Anterior Dscending(LAD) artery in 16 patients(50%) and in complex(type B2, C) lesions in 25 patients(69.4%). Ten patients were treated with heterogenous DES, the rest being treated with either homogenous DES(3 patients), plain old balloon angioplasty(3 patients), or conservative medical treatment(17 patients). None of the patients with SF suffered from cardiac death during a follow-up period of $32.9{\pm}12.4$ months. The overall rate of DES fracture over up to 3.7 years of follow-up was 0.68% with higher incidence in SES than in PES. SF frequently occurred in the LAD artery and in complex lesions. Of the patients with SF, coronary intervention was performed only when the binary restenosis lesion was significant. During the follow-up, patients with SF have continued on combination antiplatelet therapy. There is a very low rate of major adverse cardiac events(post-detection of SF), especially cardiac death associated with SF.

• Journal of Chest Surgery
• /
• v.30 no.4
• /
• pp.363-372
• /
• 1997

One hundred forty-four patients underwent operation for coarctation of the aorta at Seoul National University Children's Hospital between June 1986 and Decembsr 1995. Age ranged 0.1 to 191 months. Of these 78.5%(113) were infants. We classified the patients in terms of the anatomic location of coarctatiln and the associatCd anomalies(I[401= primary coarctation, 11(741=isthmic hypoplasia, lIIf30)=tubular hypoplasia involving transverse arch, Ar63 =with ventricular septal defect, B(28)=with other major cardiac defects). Subcalvian flap coarctoplasty(60), resection & anastomosis(44), extended aortoplasty(26), and onlay patch(14) were used as surgical methods. Overall operative mortality was 16.0(23/144)%. The hospital mortality was signific'antly higher in patheints with type 111, subtype B, younger age(under 3 months), extended aortoplasty(p(0.01). However, one-stage total repair in patients with subtype A or B were not found to be a predictor of hospital death. Restenosis had occured in 18 patients among 121 survivals(14. 9%). The mean follow-up period was 29.1 $\pm$28.8(0~129.2) months. Preoperative, immediate postoperative(within 3 months after operation) and postoperative(later than 6 months after operation) echocardiographic data on the dimensions of ascending aorta(AA), transverse arch(TA), an4 aortic isthmus(Al) were available in 77 patients(I=20, ll=42, 111= 15). Preoperative and postoperative aortic isthmus(All) and tra sverse arch indices(TAI), defined as TAIAA & AIIAA respectively, were compared. Immediate postoperative All in type 1, II and TAI in type 111 were significantly smaller in stenotic than non-stenotic group suggesting incomplete relieves of stenotic segment Younger age, subclavian coarctoplasty in patient under 3 months of age were round to be the risk factors for restenosis in this series. In conclusion, We found that aortic arch index and transverse arch index can be a useful tool to figure out the anatomic and clinical characteristics of the patients with aortic coarctation, and that anatomy, associated anomalies, age, and surgical methods may influence the surgical outcome of the coarctation repair.

• Weed & Turfgrass Science
• /
• v.6 no.2
• /
• pp.86-108
• /
• 2017

The nationwide weed survey was conducted in arable land, paddy field, upland, orchard and pasture, over whole country of Korea during 3 years from 2013 to 2015. Also, these survey were conducted in order to determine a change of weed community and to identify a major dominant weed species, and problem weeds. Weeds of arable land were composed of 619 species belonging to 81 families. Weeds occurred in paddy field were 90 species belonging to 28 families, upland weeds were 375 species of 50 families, orchard weeds were 492 species of 63 families and pasture weeds 275 species of 52 families. Among total 81 families, the Asteraceae (15.5%) was the biggest family, followed by Poaceae (13.1%), Fabaceae (5.5%), Cyperaceae (5.2%), Polygonaceae (6.3%), respectively. And these weed species were composed of annual weeds of 209 species (33.8%), winter annual of 102 species (16.4%) and perennial weeds of 308 species (49.8%). Exotic weeds naturalized in Korea were investigated as 166 species. Weed flora in Korean cultivation area have been increased as much as 13 families and 186 species for 10 years compared to 2000~2004 weed survey result of 68 families and 433 species. The increment could be resulted from the change of weed population such as increase of the herbicide-resistant and the difference of investigation method.

• Journal of Life Science
• /
• v.25 no.1
• /
• pp.68-74
• /
• 2015

Recently developed black waxy rice with a giant embryo ('Nunkeunheukchal', BGE) was selected and processed to produce high quality nutritional food. BGE contains high levels of several phytochemicals with antioxidant activities, as well as other reported health beneficial properties. In addition, the giant embryo has high protein, lipid, and amino acids contents. Within the free amino acids, ${\gamma}$-aminobutyric acid (GABA), a major inhibitory neurotransmitter, has long been used for treating the aftereffects of brain injuries and stroke. A method for manufacturing pop-rice and black rice tea by popping process in BGE is provided to increase a taste, nutrition and functionality. The produced 'pop-rice' showed increased protein (11.3%) and lipid (3.7%) contents compared with control variety, IB ('Ilmibyeo'). In addition, melanoidin related products, polyphenol and functional amino acid contents were increased by the popping process. Pop-rice tea made of BGE showed the highest extraction of total sugar, glucose, raffinose and sucrose (4 times higher than brown rice) by hot water. Scavenging activity ($SC_{50}$) of processed BGE rice powder showed strong antioxidative activity of 0.24 mg/ml using DPPH and 1.82 mg/ml using ABTs method. Thereafter, these results suggested that the popping processed rice of BGE could be one of the promising materials for healthy food development.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.2 s.6
• /
• pp.21-43
• /
• 2001

The environment to development information system including a GIS has been drastically changed in recent years in the perspectives of the complexity and diversity of the software, and the distributed processing and network computing, etc. This leads the paradigm of the software development to the CBD(Component Based Development) based object-oriented technology. As an effort to support these movements, OGC has released the abstract and implementation standards to enable approaching to the service for heterogeneous geographic information processing. It is also common trend in domestic field to develop the GIS application based on the component technology for municipal governments. Therefore, it is imperative to adopt the component technology considering current movements, yet related research works have not been made. This research is to propose a component-based GIS development methodology-ATOM(Advanced Technology Of Methodology)-and to verify its adoptability through the case study. ATOM can be used as a methodology to develop component itself and enterprise GIS supporting the whole procedure for the software development life cycle based on conventional reusable component. ATOM defines stepwise development process comprising activities and work units of each process. Also, it provides input and output, standardized items and specs for the documentation, detailed instructions for the easy understanding of the development methodology. The major characteristics of ATOM would be the component-based development methodology considering numerous features of the GIS domain to generate a component with a simple function, the smallest size, and the maximum reusability. The case study to validate the adoptability of the ATOM showed that it proves to be a efficient tool for generating a component providing relatively systematic and detailed guidelines for the component development. Therefore, ATOM would lead to the promotion of the quality and the productivity for developing application GIS software and eventually contribute to the automatic production of the GIS software, the our final goal.

• Korean Journal of Ecology and Environment
• /
• v.42 no.3
• /
• pp.382-393
• /
• 2009

The objectives of this study were to characterize long-term annual and seasonal trophic state of Topjeong Reservoir using conventional variables of Trophic State Index (TSI) and to determine the empirical relations between the trophic parameters. For the analysis, we used water quality dataset of 1995$\sim$2007, which is obtained from the Ministry of Environment, Korea and the number of parameters was 9. Annual ambient mean values of TN and TP were 1.78 mg $L^{-1}$ and 0.03 mg $L^{-1}$, respectively and TN : TP ratios averaged 76, indicating that this system was nitrogen-rich hypertrophic, and was probably phosphorus-limitation for algal growth. Therefore, nitrogen varied little with seasons and years, and total phosphorus (TP) varied depending on season and year. Monsoon dilutions of TP occurred in August and monthly fluctuations of suspended solid (SS) was similar to those of chlorophyll-$\alpha$ (CHL). Annual mean values of BOD and $COD_{Mn}$ were 1.61 mg $L^{-1}$ and 4.23 mg $L^{-1}$, respectively and the interannual values were directly influenced by the intensity of annual rainfall. There were no significant differences in the trophic variables between the two sampling sites. Mean values of Trophic State Index (TSI, Carlson, 1977), based on TN, TP, CHL, and SD (Secchi depth), turned out as eutrophic state, except for the TN (hypertrophic). Regression analyses of log-transformed seasonal CHL against TP and TN showed that variation of the CHL was explained 37% by the variation of TP ($R^2$=0.37, p<0.001, r=0.616), but not by TN ($R^2$=0.03, p>0.05). Regression coefficient of $Log_{10}$CHL vs $Log_{10}SD$ was 0.330 (p<0.003, r=0.580), indicating that transparency is regulated by the organic matter in the system. Results, data suggest that one of the ways controlling the eutrophication would be a reduction of phosphorus from the watershed.

• Pediatric Infection and Vaccine
• /
• v.25 no.2
• /
• pp.82-90
• /
• 2018

Purpose: Survival after liver transplantation (LT) has improved over the years, but infection is still a major complication. We aimed to identify the characteristics of bacterial infections in pediatric LT recipients. Methods: This study is a retrospective review of 189 consecutive children undergoing LT between 2000 and 2015 at a single center. In this study, the incidence of infection was determined for the following periods: within 1 month, between 1-5 months, and between 6-12 months. Patients who underwent liver transplants more than once or multiple organ transplants were excluded. Results: All patients had received postoperative antibiotic for 3 days. Only the maintenance immunosuppression with oral tacrolimus and steroids were performed. As a result, 132 bacterial infections developed in 87 (46.0%) patients (0.70 events per person-year). Bacterial infections occurred most frequently within the first month (n=84, 63.6%) after LT. In the pathogens, Staphylococcus aureus (15.2%), Enterococcus species (15.2%), and Klebsiella species (13.6%) were most common. Regarding the organ infected, bloodstream was most common (n=39, 29.5%), followed by peritoneum (n=28, 21.2%), urinary tract (n=25, 18.9%), and lungs (n=20, 15.2%). We changed prophylactic antibiotics from ampicillin-sulbactam to piperacillin-tazobactam at 2011, October, there were no significant effects in the prevalence of antibiotics resistant bacterial infections. The 1-year mortality was 9.0% (n=17), in which 41.2% (n=7) was attributable to bacterial infection; septicemia (n=4), pneumonia (n=2), and peritonitis (n=1). Conclusions: The incidence and type of bacterial infectious complications after LT in pediatric patients were similar to those of previous studies. Bacterial complications affecting mortality occur within 6 months after transplantation, so proper prophylaxis and treatment in this period may improve the prognosis of LT.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.251-259
• /
• 1987

Humic acids extracted from decomposing plant residues were characterized by infrared(IR) spectra. The IR spectra were further interpreted by chemical analyses for oxygen-containing functional groups such as carboxyl, phenolic, alcoholic, carbonyl, and quinionic groups. 1. The IR spectra obtained in this study were divied into three categories: spectra of humic acids from grain crop straws of rice, barley, wheat and rye produced Type I, while that from wild grass hay yielded Type II, and those from forest tree litter of the deciduous and conifers were led to give Type III. 2. There were no significant changes in the absorption bands observed among humic acids extracted at various stages of decomposition of a given Plant material. 3. The absorption band at about $3,430cm^{-1}$ represents the presence of hydrogen-bonded hydroxyl groups, phenolic-OH groups being the major component. 4. A close relationship was found between the total acidity and the content of phenolic-OH groups of humic acids. The content of carboxyl groups maintains a direct relationship with the content of total hydroxyl groups, and such a close relationship also exists between the content of alcoholic hydroxyls and that of total hydroxyl groups. 5. Overlapping of the absorption bands of carbonyl groups and quinones renders it difficult to make differentiation between the two. 6. A variety of non-armoatic cyclic hydrocarbons appears to be a structural component as evidenced by a sharp absorption peak near $995-1000cm^{-1}$.

• Radiation Oncology Journal
• /
• v.20 no.4
• /
• pp.381-390
• /
• 2002

Purpose : To develop a dose calibration program for the IAEA TRS-277 and AAPM TG-21, based on the air kerma calibration factor (or the cavity-gas calibration factor), as well as for the IAEA TRS-398 and the AAPM TG-51, based on the absorbed dose to water calibration factor, so as to avoid the unwanted error associated with these calculation procedures. Materials and Methods : Currently, the most widely used dosimetry Protocols of high energy photon beams are the air kerma calibration factor based on the IAEA TRS-277 and the AAPM TG-21. However, this has somewhat complex formalism and limitations for the improvement of the accuracy due to uncertainties of the physical quantities. Recently, the IAEA and the AAPM published the absorbed dose to water calibration factor based, on the IAEA TRS-398 and the AAPM TG-51. The formalism and physical parameters were strictly applied to these four dose calibration programs. The tables and graphs of physical data and the information for ion chambers were numericalized for their incorporation into a database. These programs were developed user to be friendly, with the Visual $C^{++}$ language for their ease of use in a Windows environment according to the recommendation of each protocols. Results : The dose calibration programs for the high energy photon beams, developed for the four protocols, allow the input of informations about a dosimetry system, the characteristics of the beam quality, the measurement conditions and dosimetry results, to enable the minimization of any inter-user variations and errors, during the calculation procedure. Also, it was possible to compare the absorbed dose to water data of the four different protocols at a single reference points. Conclusion : Since this program expressed information in numerical and data-based forms for the physical parameter tables, graphs and of the ion chambers, the error associated with the procedures and different user could be solved. It was possible to analyze and compare the major difference for each dosimetry protocol, since the program was designed to be user friendly and to accurately calculate the correction factors and absorbed dose. It is expected that accurate dose calculations in high energy photon beams can be made by the users for selecting and performing the appropriate dosimetry protocol.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.446-455
• /
• 2015

Based on comparative studies on standards and grading procedures of machine graded lumber in Korea and other countries, this study proposed a procedure of determining the grade classification and design strengths of domestic machine graded lumber. Differences between machine stress rated lumber and E-rated laminations were detailed in order to clarify the need for the procedure improvement. To this improvement the use of average MOE requirement for grading was introduced instead of the fixed minimum MOE requirement which is currently used in the Korean standards. It was found that the fixed minimum MOE requirement method was easier for an inspector to grade but, less efficient as a strength predictor than the average MOE requirement method. The advantage of average MOE requirement method is statistically MOR-MOE regression-based MOR prediction and highly efficient in quality control though it requires a computer-aided operation system in an initial setup. A major weakness of the current Korean grading system was found that different strength characteristics depending on wood species were not reflected on the grade classification and the tabulated allowable design stress. The proposed procedures were developed taking advantages of respective merits of both methods and based on MOR-MOE regression analysis. Through this procedure, the grades of machine stress rated lumber should be revised to become interchangeable with E-rated lamination, which would be beneficial to the cost competitiveness of domestic machine graded lumber and glued laminated timber industry.